---

yaml
---
r: 123824
b: refs/heads/master
c: c6ad115
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 28ab44c5be60a9b91021a7cc7b4e202775c04764
+refs/heads/master: c6ad115876763e4f15055982ecb9579cb7abab5f

trunk/arch/arm/mach-s3c2410/include/mach/gpio.h

@@ -15,4 +15,10 @@
 #define gpio_set_value	__gpio_set_value
 #define gpio_cansleep	__gpio_cansleep
 
+/* some boards require extra gpio capacity to support external
+ * devices that need GPIO.
+ */
+
+#define ARCH_NR_GPIOS	(256 + CONFIG_S3C24XX_GPIO_EXTRA)
+
 #include <asm-generic/gpio.h>

trunk/arch/arm/mach-s3c2412/mach-jive.c

@@ -398,11 +398,12 @@ static struct s3c2410_spigpio_info jive_lcd_spi = {
 	.bus_num	= 1,
 	.pin_clk	= S3C2410_GPG8,
 	.pin_mosi	= S3C2410_GPB8,
+	.num_chipselect	= 1,
 	.chip_select	= jive_lcd_spi_chipselect,
 };
 
 static struct platform_device jive_device_lcdspi = {
-	.name		= "s3c24xx-spi-gpio",
+	.name		= "spi_s3c24xx_gpio",
 	.id		= 1,
 	.num_resources  = 0,
 	.dev.platform_data = &jive_lcd_spi,
@@ -419,11 +420,12 @@ static struct s3c2410_spigpio_info jive_wm8750_spi = {
 	.bus_num	= 2,
 	.pin_clk	= S3C2410_GPB4,
 	.pin_mosi	= S3C2410_GPB9,
+	.num_chipselect	= 1,
 	.chip_select	= jive_wm8750_chipselect,
 };
 
 static struct platform_device jive_device_wm8750 = {
-	.name		= "s3c24xx-spi-gpio",
+	.name		= "spi_s3c24xx_gpio",
 	.id		= 2,
 	.num_resources  = 0,
 	.dev.platform_data = &jive_wm8750_spi,

trunk/arch/arm/mach-s3c2440/Kconfig

@@ -32,6 +32,7 @@ config MACH_ANUBIS
 	select S3C24XX_DCLK
 	select PM_SIMTEC if PM
 	select HAVE_PATA_PLATFORM
+	select S3C24XX_GPIO_EXTRA64
 	help
 	  Say Y here if you are using the Simtec Electronics ANUBIS
 	  development system
@@ -41,6 +42,7 @@ config MACH_OSIRIS
 	select CPU_S3C2440
 	select S3C24XX_DCLK
 	select PM_SIMTEC if PM
+	select S3C24XX_GPIO_EXTRA128
 	help
 	  Say Y here if you are using the Simtec IM2440D20 module, also
 	  known as the Osiris.

trunk/arch/arm/mach-s3c2440/mach-anubis.c

@@ -366,24 +366,29 @@ static struct sm501_initdata anubis_sm501_initdata = {
 		.mask	= 0,
 	},
 
+	.devices	= SM501_USE_GPIO,
+
 	/* set the SDRAM and bus clocks */
 	.mclk		= 72 * MHZ,
 	.m1xclk		= 144 * MHZ,
 };
 
 static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
 	[0] = {
+		.bus_num	= 1,
 		.pin_scl	= 44,
 		.pin_sda	= 45,
 	},
 	[1] = {
+		.bus_num	= 2,
 		.pin_scl	= 40,
 		.pin_sda	= 41,
 	},
 };
 
 static struct sm501_platdata anubis_sm501_platdata = {
 	.init		= &anubis_sm501_initdata,
+	.gpio_base	= -1,
 	.gpio_i2c	= anubis_sm501_gpio_i2c,
 	.gpio_i2c_nr	= ARRAY_SIZE(anubis_sm501_gpio_i2c),
 };

trunk/arch/arm/mach-s3c2440/mach-at2440evb.c

@@ -28,6 +28,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/hardware.h>
+#include <mach/fb.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
@@ -45,6 +46,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <asm/plat-s3c24xx/mci.h>
 
 static struct map_desc at2440evb_iodesc[] __initdata = {
 	/* Nothing here */
@@ -162,19 +164,60 @@ static struct platform_device at2440evb_device_eth = {
 	},
 };
 
+static struct s3c24xx_mci_pdata at2440evb_mci_pdata = {
+	.gpio_detect	= S3C2410_GPG10,
+};
+
+/* 7" LCD panel */
+
+static struct s3c2410fb_display at2440evb_lcd_cfg __initdata = {
+
+	.lcdcon5	= S3C2410_LCDCON5_FRM565 |
+			  S3C2410_LCDCON5_INVVLINE |
+			  S3C2410_LCDCON5_INVVFRAME |
+			  S3C2410_LCDCON5_PWREN |
+			  S3C2410_LCDCON5_HWSWP,
+
+	.type		= S3C2410_LCDCON1_TFT,
+
+	.width		= 800,
+	.height		= 480,
+
+	.pixclock	= 33333, /* HCLK 60 MHz, divisor 2 */
+	.xres		= 800,
+	.yres		= 480,
+	.bpp		= 16,
+	.left_margin	= 88,
+	.right_margin	= 40,
+	.hsync_len	= 128,
+	.upper_margin	= 32,
+	.lower_margin	= 11,
+	.vsync_len	= 2,
+};
+
+static struct s3c2410fb_mach_info at2440evb_fb_info __initdata = {
+	.displays	= &at2440evb_lcd_cfg,
+	.num_displays	= 1,
+	.default_display = 0,
+};
+
 static struct platform_device *at2440evb_devices[] __initdata = {
 	&s3c_device_usb,
 	&s3c_device_wdt,
 	&s3c_device_adc,
 	&s3c_device_i2c,
 	&s3c_device_rtc,
 	&s3c_device_nand,
+	&s3c_device_sdi,
+	&s3c_device_lcd,
 	&at2440evb_device_eth,
 };
 
 static void __init at2440evb_map_io(void)
 {
 	s3c_device_nand.dev.platform_data = &at2440evb_nand_info;
+	s3c_device_sdi.name = "s3c2440-sdi";
+	s3c_device_sdi.dev.platform_data = &at2440evb_mci_pdata;
 
 	s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
 	s3c24xx_init_clocks(16934400);
@@ -183,6 +226,7 @@ static void __init at2440evb_map_io(void)
 
 static void __init at2440evb_init(void)
 {
+	s3c24xx_fb_set_platdata(&at2440evb_fb_info);
 	platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));
 }
 

trunk/arch/arm/plat-s3c24xx/Kconfig

@@ -41,6 +41,27 @@ config S3C24XX_PWM
 	  Support for exporting the PWM timer blocks via the pwm device
 	  system.
 
+
+# gpio configurations
+
+config S3C24XX_GPIO_EXTRA
+	int
+	default 128 if S3C24XX_GPIO_EXTRA128
+	default 64 if S3C24XX_GPIO_EXTRA64
+	default 0
+
+config S3C24XX_GPIO_EXTRA64
+	bool
+	help
+	  Add an extra 64 gpio numbers to the available GPIO pool. This is
+	  available for boards that need extra gpios for external devices.
+
+config S3C24XX_GPIO_EXTRA128
+	bool
+	help
+	  Add an extra 128 gpio numbers to the available GPIO pool. This is
+	  available for boards that need extra gpios for external devices.
+
 config PM_SIMTEC
 	bool
 	help