---

yaml
---
r: 316085
b: refs/heads/master
c: 92a9f14
h: refs/heads/master
i:
  316083: a4950aa
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: e8ff13b0bf88b5e696323a1eec877783d965b3c6
+refs/heads/master: 92a9f14b8b8e5ade5b49bcd6b95fc05f85a39e90

trunk/.mailmap

@@ -111,8 +111,5 @@ Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
 Uwe Kleine-König <ukl@pengutronix.de>
 Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
 Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
-Viresh Kumar <viresh.linux@gmail.com> <viresh.kumar@st.com>
 Takashi YOSHII <takashi.yoshii.zj@renesas.com>
 Yusuke Goda <goda.yusuke@renesas.com>
-Gustavo Padovan <gustavo@las.ic.unicamp.br>
-Gustavo Padovan <padovan@profusion.mobi>

trunk/Documentation/ABI/testing/sysfs-block-rssd

@@ -1,5 +1,18 @@
+What:           /sys/block/rssd*/registers
+Date:           March 2012
+KernelVersion:  3.3
+Contact:        Asai Thambi S P <asamymuthupa@micron.com>
+Description:    This is a read-only file. Dumps below driver information and
+                hardware registers.
+                    - S ACTive
+                    - Command Issue
+                    - Allocated
+                    - Completed
+                    - PORT IRQ STAT
+                    - HOST IRQ STAT
+
 What:           /sys/block/rssd*/status
 Date:           April 2012
 KernelVersion:  3.4
 Contact:        Asai Thambi S P <asamymuthupa@micron.com>
-Description:    This is a read-only file. Indicates the status of the device.
+Description:   This is a read-only file. Indicates the status of the device.

trunk/Documentation/ABI/testing/sysfs-bus-iio

@@ -219,7 +219,6 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_scale
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_scale
-What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_scale
@@ -274,7 +273,6 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale_available
 What:		/sys/.../iio:deviceX/in_voltageX_scale_available
 What:		/sys/.../iio:deviceX/in_voltage-voltage_scale_available
 What:		/sys/.../iio:deviceX/out_voltageX_scale_available
-What:		/sys/.../iio:deviceX/out_altvoltageX_scale_available
 What:		/sys/.../iio:deviceX/in_capacitance_scale_available
 KernelVersion:	2.635
 Contact:	linux-iio@vger.kernel.org
@@ -300,19 +298,14 @@ Description:
 		gives the 3dB frequency of the filter in Hz.
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_raw
-What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Raw (unscaled, no bias etc.) output voltage for
 		channel Y.  The number must always be specified and
 		unique if the output corresponds to a single channel.
-		While DAC like devices typically use out_voltage,
-		a continuous frequency generating device, such as
-		a DDS or PLL should use out_altvoltage.
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw
-What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw
 KernelVersion:	2.6.37
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -323,8 +316,6 @@ Description:
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode
-What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode
-What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode
 KernelVersion:	2.6.38
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -339,8 +330,6 @@ Description:
 
 What:		/sys/.../iio:deviceX/out_votlageY_powerdown_mode_available
 What:		/sys/.../iio:deviceX/out_voltage_powerdown_mode_available
-What:		/sys/.../iio:deviceX/out_altvotlageY_powerdown_mode_available
-What:		/sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available
 KernelVersion:	2.6.38
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -349,8 +338,6 @@ Description:
 
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown
 What:		/sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown
-What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown
-What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown
 KernelVersion:	2.6.38
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -359,24 +346,6 @@ Description:
 		normal operation. Y may be suppressed if all outputs are
 		controlled together.
 
-What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency
-KernelVersion:	3.4.0
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Output frequency for channel Y in Hz. The number must always be
-		specified and unique if the output corresponds to a single
-		channel.
-
-What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase
-KernelVersion:	3.4.0
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Phase in radians of one frequency/clock output Y
-		(out_altvoltageY) relative to another frequency/clock output
-		(out_altvoltageZ) of the device X. The number must always be
-		specified and unique if the output corresponds to a single
-		channel.
-
 What:		/sys/bus/iio/devices/iio:deviceX/events
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org

trunk/Documentation/ABI/testing/sysfs-bus-rbd

@@ -65,11 +65,11 @@ snap_*
 Entries under /sys/bus/rbd/devices/<dev-id>/snap_<snap-name>
 -------------------------------------------------------------
 
-snap_id
+id
 
 	The rados internal snapshot id assigned for this snapshot
 
-snap_size
+size
 
 	The size of the image when this snapshot was taken.
 

trunk/Documentation/ABI/testing/sysfs-class-mtd

@@ -123,55 +123,3 @@ Description:
 		half page, or a quarter page).
 
 		In the case of ECC NOR, it is the ECC block size.
-
-What:		/sys/class/mtd/mtdX/ecc_strength
-Date:		April 2012
-KernelVersion:	3.4
-Contact:	linux-mtd@lists.infradead.org
-Description:
-		Maximum number of bit errors that the device is capable of
-		correcting within each region covering an ecc step.  This will
-		always be a non-negative integer.  Note that some devices will
-		have multiple ecc steps within each writesize region.
-
-		In the case of devices lacking any ECC capability, it is 0.
-
-What:		/sys/class/mtd/mtdX/bitflip_threshold
-Date:		April 2012
-KernelVersion:	3.4
-Contact:	linux-mtd@lists.infradead.org
-Description:
-		This allows the user to examine and adjust the criteria by which
-		mtd returns -EUCLEAN from mtd_read() and mtd_read_oob().  If the
-		maximum number of bit errors that were corrected on any single
-		region comprising an ecc step (as reported by the driver) equals
-		or exceeds this value, -EUCLEAN is returned.  Otherwise, absent
-		an error, 0 is returned.  Higher layers (e.g., UBI) use this
-		return code as an indication that an erase block may be
-		degrading and should be scrutinized as a candidate for being
-		marked as bad.
-
-		The initial value may be specified by the flash device driver.
-		If not, then the default value is ecc_strength.
-
-		The introduction of this feature brings a subtle change to the
-		meaning of the -EUCLEAN return code.  Previously, it was
-		interpreted to mean simply "one or more bit errors were
-		corrected".  Its new interpretation can be phrased as "a
-		dangerously high number of bit errors were corrected on one or
-		more regions comprising an ecc step".  The precise definition of
-		"dangerously high" can be adjusted by the user with
-		bitflip_threshold.  Users are discouraged from doing this,
-		however, unless they know what they are doing and have intimate
-		knowledge of the properties of their device.  Broadly speaking,
-		bitflip_threshold should be low enough to detect genuine erase
-		block degradation, but high enough to avoid the consequences of
-		a persistent return value of -EUCLEAN on devices where sticky
-		bitflips occur.  Note that if bitflip_threshold exceeds
-		ecc_strength, -EUCLEAN is never returned by the read operations.
-		Conversely, if bitflip_threshold is zero, -EUCLEAN is always
-		returned, absent a hard error.
-
-		This is generally applicable only to NAND flash devices with ECC
-		capability.  It is ignored on devices lacking ECC capability;
-		i.e., devices for which ecc_strength is zero.