---

yaml
---
r: 35374
b: refs/heads/master
c: 8028916
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: f6d950e2a5209bd7e3fb1a238f43f24f3697f5b0
+refs/heads/master: 80289167fd3ebaeb7b2641e69cbec44b61165fe7

trunk/drivers/scsi/libata-core.c

@@ -1528,7 +1528,7 @@ int ata_dev_configure(struct ata_device *dev, int print_info)
  *	Zero on success, negative errno otherwise.
  */
 
-static int ata_bus_probe(struct ata_port *ap)
+int ata_bus_probe(struct ata_port *ap)
 {
 	unsigned int classes[ATA_MAX_DEVICES];
 	int tries[ATA_MAX_DEVICES];

trunk/drivers/scsi/libata-scsi.c

@@ -3158,3 +3158,152 @@ void ata_scsi_dev_rescan(void *data)
 			scsi_rescan_device(&(dev->sdev->sdev_gendev));
 	}
 }
+
+/**
+ *	ata_sas_port_alloc - Allocate port for a SAS attached SATA device
+ *	@pdev: PCI device that the scsi device is attached to
+ *	@port_info: Information from low-level host driver
+ *	@host: SCSI host that the scsi device is attached to
+ *
+ *	LOCKING:
+ *	PCI/etc. bus probe sem.
+ *
+ *	RETURNS:
+ *	ata_port pointer on success / NULL on failure.
+ */
+
+struct ata_port *ata_sas_port_alloc(struct ata_host_set *host_set,
+				    struct ata_port_info *port_info,
+				    struct Scsi_Host *host)
+{
+	struct ata_port *ap = kzalloc(sizeof(*ap), GFP_KERNEL);
+	struct ata_probe_ent *ent;
+
+	if (!ap)
+		return NULL;
+
+	ent = ata_probe_ent_alloc(host_set->dev, port_info);
+	if (!ent) {
+		kfree(ap);
+		return NULL;
+	}
+
+	ata_port_init(ap, host_set, ent, 0);
+	ap->lock = host->host_lock;
+	kfree(ent);
+	return ap;
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_alloc);
+
+/**
+ *	ata_sas_port_start - Set port up for dma.
+ *	@ap: Port to initialize
+ *
+ *	Called just after data structures for each port are
+ *	initialized.  Allocates DMA pad.
+ *
+ *	May be used as the port_start() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+int ata_sas_port_start(struct ata_port *ap)
+{
+	return ata_pad_alloc(ap, ap->dev);
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_start);
+
+/**
+ *	ata_port_stop - Undo ata_sas_port_start()
+ *	@ap: Port to shut down
+ *
+ *	Frees the DMA pad.
+ *
+ *	May be used as the port_stop() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+
+void ata_sas_port_stop(struct ata_port *ap)
+{
+	ata_pad_free(ap, ap->dev);
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_stop);
+
+/**
+ *	ata_sas_port_init - Initialize a SATA device
+ *	@ap: SATA port to initialize
+ *
+ *	LOCKING:
+ *	PCI/etc. bus probe sem.
+ *
+ *	RETURNS:
+ *	Zero on success, non-zero on error.
+ */
+
+int ata_sas_port_init(struct ata_port *ap)
+{
+	int rc = ap->ops->port_start(ap);
+
+	if (!rc)
+		rc = ata_bus_probe(ap);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_init);
+
+/**
+ *	ata_sas_port_destroy - Destroy a SATA port allocated by ata_sas_port_alloc
+ *	@ap: SATA port to destroy
+ *
+ */
+
+void ata_sas_port_destroy(struct ata_port *ap)
+{
+	ap->ops->port_stop(ap);
+	kfree(ap);
+}
+EXPORT_SYMBOL_GPL(ata_sas_port_destroy);
+
+/**
+ *	ata_sas_slave_configure - Default slave_config routine for libata devices
+ *	@sdev: SCSI device to configure
+ *	@ap: ATA port to which SCSI device is attached
+ *
+ *	RETURNS:
+ *	Zero.
+ */
+
+int ata_sas_slave_configure(struct scsi_device *sdev, struct ata_port *ap)
+{
+	ata_scsi_sdev_config(sdev);
+	ata_scsi_dev_config(sdev, ap->device);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ata_sas_slave_configure);
+
+/**
+ *	ata_sas_queuecmd - Issue SCSI cdb to libata-managed device
+ *	@cmd: SCSI command to be sent
+ *	@done: Completion function, called when command is complete
+ *	@ap:	ATA port to which the command is being sent
+ *
+ *	RETURNS:
+ *	Zero.
+ */
+
+int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *),
+		     struct ata_port *ap)
+{
+	ata_scsi_dump_cdb(ap, cmd);
+
+	if (likely(ata_scsi_dev_enabled(ap->device)))
+		__ata_scsi_queuecmd(cmd, done, ap->device);
+	else {
+		cmd->result = (DID_BAD_TARGET << 16);
+		done(cmd);
+	}
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ata_sas_queuecmd);

trunk/drivers/scsi/libata.h

@@ -111,6 +111,7 @@ extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args,
                                            u8 *rbuf, unsigned int buflen));
 extern void ata_schedule_scsi_eh(struct Scsi_Host *shost);
 extern void ata_scsi_dev_rescan(void *data);
+extern int ata_bus_probe(struct ata_port *ap);
 
 /* libata-eh.c */
 extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd);

trunk/include/linux/libata.h

@@ -691,6 +691,15 @@ extern int ata_scsi_detect(struct scsi_host_template *sht);
 extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg);
 extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *));
 extern int ata_scsi_release(struct Scsi_Host *host);
+extern void ata_sas_port_destroy(struct ata_port *);
+extern struct ata_port *ata_sas_port_alloc(struct ata_host_set *,
+					   struct ata_port_info *, struct Scsi_Host *);
+extern int ata_sas_port_init(struct ata_port *);
+extern int ata_sas_port_start(struct ata_port *ap);
+extern void ata_sas_port_stop(struct ata_port *ap);
+extern int ata_sas_slave_configure(struct scsi_device *, struct ata_port *);
+extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *),
+			    struct ata_port *ap);
 extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
 extern int sata_scr_valid(struct ata_port *ap);
 extern int sata_scr_read(struct ata_port *ap, int reg, u32 *val);