---

yaml
---
r: 151388
b: refs/heads/master
c: 54e4026
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 568d422e9cf52b7b26d2e026ae1617971f62b560
+refs/heads/master: 54e4026b64a970303349b952866641a7804ef594

trunk/drivers/usb/gadget/Kconfig

@@ -156,7 +156,7 @@ config USB_ATMEL_USBA
 
 config USB_GADGET_FSL_USB2
 	boolean "Freescale Highspeed USB DR Peripheral Controller"
-	depends on FSL_SOC
+	depends on FSL_SOC || ARCH_MXC
 	select USB_GADGET_DUALSPEED
 	help
 	   Some of Freescale PowerPC processors have a High Speed

trunk/drivers/usb/gadget/Makefile

@@ -18,6 +18,10 @@ obj-$(CONFIG_USB_S3C2410)	+= s3c2410_udc.o
 obj-$(CONFIG_USB_AT91)		+= at91_udc.o
 obj-$(CONFIG_USB_ATMEL_USBA)	+= atmel_usba_udc.o
 obj-$(CONFIG_USB_FSL_USB2)	+= fsl_usb2_udc.o
+fsl_usb2_udc-objs		:= fsl_udc_core.o
+ifeq ($(CONFIG_ARCH_MXC),y)
+fsl_usb2_udc-objs		+= fsl_mx3_udc.o
+endif
 obj-$(CONFIG_USB_M66592)	+= m66592-udc.o
 obj-$(CONFIG_USB_FSL_QE)	+= fsl_qe_udc.o
 obj-$(CONFIG_USB_CI13XXX)	+= ci13xxx_udc.o

trunk/drivers/usb/gadget/fsl_mx3_udc.c

@@ -0,0 +1,95 @@
+/*
+ * Copyright (C) 2009
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * Description:
+ * Helper routines for i.MX3x SoCs from Freescale, needed by the fsl_usb2_udc.c
+ * driver to function correctly on these systems.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fsl_devices.h>
+#include <linux/platform_device.h>
+
+static struct clk *mxc_ahb_clk;
+static struct clk *mxc_usb_clk;
+
+int fsl_udc_clk_init(struct platform_device *pdev)
+{
+	struct fsl_usb2_platform_data *pdata;
+	unsigned long freq;
+	int ret;
+
+	pdata = pdev->dev.platform_data;
+
+	mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
+	if (IS_ERR(mxc_ahb_clk))
+		return PTR_ERR(mxc_ahb_clk);
+
+	ret = clk_enable(mxc_ahb_clk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
+		goto eenahb;
+	}
+
+	/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
+	mxc_usb_clk = clk_get(&pdev->dev, "usb");
+	if (IS_ERR(mxc_usb_clk)) {
+		dev_err(&pdev->dev, "clk_get(\"usb\") failed\n");
+		ret = PTR_ERR(mxc_usb_clk);
+		goto egusb;
+	}
+
+	freq = clk_get_rate(mxc_usb_clk);
+	if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
+	    (freq < 59999000 || freq > 60001000)) {
+		dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
+		goto eclkrate;
+	}
+
+	ret = clk_enable(mxc_usb_clk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "clk_enable(\"usb_clk\") failed\n");
+		goto eenusb;
+	}
+
+	return 0;
+
+eenusb:
+eclkrate:
+	clk_put(mxc_usb_clk);
+	mxc_usb_clk = NULL;
+egusb:
+	clk_disable(mxc_ahb_clk);
+eenahb:
+	clk_put(mxc_ahb_clk);
+	return ret;
+}
+
+void fsl_udc_clk_finalize(struct platform_device *pdev)
+{
+	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
+
+	/* ULPI transceivers don't need usbpll */
+	if (pdata->phy_mode == FSL_USB2_PHY_ULPI) {
+		clk_disable(mxc_usb_clk);
+		clk_put(mxc_usb_clk);
+		mxc_usb_clk = NULL;
+	}
+}
+
+void fsl_udc_clk_release(void)
+{
+	if (mxc_usb_clk) {
+		clk_disable(mxc_usb_clk);
+		clk_put(mxc_usb_clk);
+	}
+	clk_disable(mxc_ahb_clk);
+	clk_put(mxc_ahb_clk);
+}

trunk/drivers/usb/gadget/fsl_usb2_udc.c → trunk/drivers/usb/gadget/fsl_udc_core.c

@@ -38,6 +38,7 @@
 #include <linux/platform_device.h>
 #include <linux/fsl_devices.h>
 #include <linux/dmapool.h>
+#include <linux/delay.h>
 
 #include <asm/byteorder.h>
 #include <asm/io.h>
@@ -57,7 +58,9 @@ static const char driver_name[] = "fsl-usb2-udc";
 static const char driver_desc[] = DRIVER_DESC;
 
 static struct usb_dr_device *dr_regs;
+#ifndef CONFIG_ARCH_MXC
 static struct usb_sys_interface *usb_sys_regs;
+#endif
 
 /* it is initialized in probe()  */
 static struct fsl_udc *udc_controller = NULL;
@@ -174,10 +177,34 @@ static void nuke(struct fsl_ep *ep, int status)
 
 static int dr_controller_setup(struct fsl_udc *udc)
 {
-	unsigned int tmp = 0, portctrl = 0, ctrl = 0;
+	unsigned int tmp, portctrl;
+#ifndef CONFIG_ARCH_MXC
+	unsigned int ctrl;
+#endif
 	unsigned long timeout;
 #define FSL_UDC_RESET_TIMEOUT 1000
 
+	/* Config PHY interface */
+	portctrl = fsl_readl(&dr_regs->portsc1);
+	portctrl &= ~(PORTSCX_PHY_TYPE_SEL | PORTSCX_PORT_WIDTH);
+	switch (udc->phy_mode) {
+	case FSL_USB2_PHY_ULPI:
+		portctrl |= PORTSCX_PTS_ULPI;
+		break;
+	case FSL_USB2_PHY_UTMI_WIDE:
+		portctrl |= PORTSCX_PTW_16BIT;
+		/* fall through */
+	case FSL_USB2_PHY_UTMI:
+		portctrl |= PORTSCX_PTS_UTMI;
+		break;
+	case FSL_USB2_PHY_SERIAL:
+		portctrl |= PORTSCX_PTS_FSLS;
+		break;
+	default:
+		return -EINVAL;
+	}
+	fsl_writel(portctrl, &dr_regs->portsc1);
+
 	/* Stop and reset the usb controller */
 	tmp = fsl_readl(&dr_regs->usbcmd);
 	tmp &= ~USB_CMD_RUN_STOP;
@@ -215,31 +242,12 @@ static int dr_controller_setup(struct fsl_udc *udc)
 		udc->ep_qh, (int)tmp,
 		fsl_readl(&dr_regs->endpointlistaddr));
 
-	/* Config PHY interface */
-	portctrl = fsl_readl(&dr_regs->portsc1);
-	portctrl &= ~(PORTSCX_PHY_TYPE_SEL | PORTSCX_PORT_WIDTH);
-	switch (udc->phy_mode) {
-	case FSL_USB2_PHY_ULPI:
-		portctrl |= PORTSCX_PTS_ULPI;
-		break;
-	case FSL_USB2_PHY_UTMI_WIDE:
-		portctrl |= PORTSCX_PTW_16BIT;
-		/* fall through */
-	case FSL_USB2_PHY_UTMI:
-		portctrl |= PORTSCX_PTS_UTMI;
-		break;
-	case FSL_USB2_PHY_SERIAL:
-		portctrl |= PORTSCX_PTS_FSLS;
-		break;
-	default:
-		return -EINVAL;
-	}
-	fsl_writel(portctrl, &dr_regs->portsc1);
-
 	/* Config control enable i/o output, cpu endian register */
+#ifndef CONFIG_ARCH_MXC
 	ctrl = __raw_readl(&usb_sys_regs->control);
 	ctrl |= USB_CTRL_IOENB;
 	__raw_writel(ctrl, &usb_sys_regs->control);
+#endif
 
 #if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
 	/* Turn on cache snooping hardware, since some PowerPC platforms
@@ -2043,6 +2051,7 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count,
 	size -= t;
 	next += t;
 
+#ifndef CONFIG_ARCH_MXC
 	tmp_reg = usb_sys_regs->snoop1;
 	t = scnprintf(next, size, "Snoop1 Reg : = [0x%x]\n\n", tmp_reg);
 	size -= t;
@@ -2053,6 +2062,7 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count,
 			tmp_reg);
 	size -= t;
 	next += t;
+#endif
 
 	/* ------fsl_udc, fsl_ep, fsl_request structure information ----- */
 	ep = &udc->eps[0];
@@ -2263,14 +2273,21 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
 		goto err_kfree;
 	}
 
-	dr_regs = ioremap(res->start, res->end - res->start + 1);
+	dr_regs = ioremap(res->start, resource_size(res));
 	if (!dr_regs) {
 		ret = -ENOMEM;
 		goto err_release_mem_region;
 	}
 
+#ifndef CONFIG_ARCH_MXC
 	usb_sys_regs = (struct usb_sys_interface *)
 			((u32)dr_regs + USB_DR_SYS_OFFSET);
+#endif
+
+	/* Initialize USB clocks */
+	ret = fsl_udc_clk_init(pdev);
+	if (ret < 0)
+		goto err_iounmap_noclk;
 
 	/* Read Device Controller Capability Parameters register */
 	dccparams = fsl_readl(&dr_regs->dccparams);
@@ -2308,6 +2325,8 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
 	 * leave usbintr reg untouched */
 	dr_controller_setup(udc_controller);
 
+	fsl_udc_clk_finalize(pdev);
+
 	/* Setup gadget structure */
 	udc_controller->gadget.ops = &fsl_gadget_ops;
 	udc_controller->gadget.is_dualspeed = 1;
@@ -2362,6 +2381,8 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
 err_free_irq:
 	free_irq(udc_controller->irq, udc_controller);
 err_iounmap:
+	fsl_udc_clk_release();
+err_iounmap_noclk:
 	iounmap(dr_regs);
 err_release_mem_region:
 	release_mem_region(res->start, res->end - res->start + 1);
@@ -2384,6 +2405,8 @@ static int __exit fsl_udc_remove(struct platform_device *pdev)
 		return -ENODEV;
 	udc_controller->done = &done;
 
+	fsl_udc_clk_release();
+
 	/* DR has been stopped in usb_gadget_unregister_driver() */
 	remove_proc_file();
 

trunk/drivers/usb/gadget/fsl_usb2_udc.h

@@ -563,4 +563,22 @@ static void dump_msg(const char *label, const u8 * buf, unsigned int length)
 					* 2 + ((windex & USB_DIR_IN) ? 1 : 0))
 #define get_pipe_by_ep(EP)	(ep_index(EP) * 2 + ep_is_in(EP))
 
+struct platform_device;
+#ifdef CONFIG_ARCH_MXC
+int fsl_udc_clk_init(struct platform_device *pdev);
+void fsl_udc_clk_finalize(struct platform_device *pdev);
+void fsl_udc_clk_release(void);
+#else
+static inline int fsl_udc_clk_init(struct platform_device *pdev)
+{
+	return 0;
+}
+static inline void fsl_udc_clk_finalize(struct platform_device *pdev)
+{
+}
+static inline void fsl_udc_clk_release(void)
+{
+}
+#endif
+
 #endif