---

yaml
---
r: 25179
b: refs/heads/master
c: b043b67
h: refs/heads/master
i:
  25177: 0be8189
  25175: 83e9230
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: fb9c280d4c6d4586670e3dfd041d8258db36b330
+refs/heads/master: b043b673dc8a73daa233d5d92cf70b32e7351314

trunk/Documentation/input/joystick-parport.txt

@@ -36,12 +36,12 @@ with them.
 
   All NES and SNES use the same synchronous serial protocol, clocked from
 the computer's side (and thus timing insensitive). To allow up to 5 NES
-and/or SNES gamepads connected to the parallel port at once, the output
-lines of the parallel port are shared, while one of 5 available input lines
-is assigned to each gamepad.
+and/or SNES gamepads and/or SNES mice connected to the parallel port at once,
+the output lines of the parallel port are shared, while one of 5 available
+input lines is assigned to each gamepad.
 
   This protocol is handled by the gamecon.c driver, so that's the one
-you'll use for NES and SNES gamepads.
+you'll use for NES, SNES gamepads and SNES mice.
 
   The main problem with PC parallel ports is that they don't have +5V power
 source on any of their pins. So, if you want a reliable source of power
@@ -106,7 +106,7 @@ A, Turbo B, Select and Start, and is connected through 5 wires, then it is
 either a NES or NES clone and will work with this connection. SNES gamepads
 also use 5 wires, but have more buttons. They will work as well, of course.
 
-Pinout for NES gamepads                 Pinout for SNES gamepads
+Pinout for NES gamepads                 Pinout for SNES gamepads and mice
 
 	   +----> Power                   +-----------------------\
 	   |                            7 | o  o  o  o |  x  x  o  | 1
@@ -454,6 +454,7 @@ uses the following kernel/module command line:
 	  6  | N64 pad
 	  7  | Sony PSX controller
 	  8  | Sony PSX DDR controller
+	  9  | SNES mouse
 
   The exact type of the PSX controller type is autoprobed when used so
 hot swapping should work (but is not recomended).

trunk/Documentation/pcmcia/driver-changes.txt

@@ -1,5 +1,11 @@
 This file details changes in 2.6 which affect PCMCIA card driver authors:
 
+* New release helper (as of 2.6.17)
+   Instead of calling pcmcia_release_{configuration,io,irq,win}, all that's
+   necessary now is calling pcmcia_disable_device. As there is no valid
+   reason left to call pcmcia_release_io and pcmcia_release_irq, the
+   exports for them were removed.
+
 * Unify detach and REMOVAL event code, as well as attach and INSERTION
   code (as of 2.6.16)
        void (*remove)          (struct pcmcia_device *dev);

trunk/MAINTAINERS

@@ -1451,6 +1451,12 @@ P:	Juanjo Ciarlante
 M:	jjciarla@raiz.uncu.edu.ar
 S:	Maintained
 
+IPATH DRIVER:
+P:	Bryan O'Sullivan
+M:	support@pathscale.com
+L:	openib-general@openib.org
+S:	Supported
+
 IPX NETWORK LAYER
 P:	Arnaldo Carvalho de Melo
 M:	acme@conectiva.com.br

trunk/arch/alpha/kernel/setup.c

@@ -28,6 +28,7 @@
 #include <linux/init.h>
 #include <linux/string.h>
 #include <linux/ioport.h>
+#include <linux/platform_device.h>
 #include <linux/bootmem.h>
 #include <linux/pci.h>
 #include <linux/seq_file.h>
@@ -1478,3 +1479,20 @@ alpha_panic_event(struct notifier_block *this, unsigned long event, void *ptr)
 #endif
         return NOTIFY_DONE;
 }
+
+static __init int add_pcspkr(void)
+{
+	struct platform_device *pd;
+	int ret;
+
+	pd = platform_device_alloc("pcspkr", -1);
+	if (!pd)
+		return -ENOMEM;
+
+	ret = platform_device_add(pd);
+	if (ret)
+		platform_device_put(pd);
+
+	return ret;
+}
+device_initcall(add_pcspkr);

trunk/arch/i386/kernel/setup.c

@@ -34,6 +34,7 @@
 #include <linux/initrd.h>
 #include <linux/bootmem.h>
 #include <linux/seq_file.h>
+#include <linux/platform_device.h>
 #include <linux/console.h>
 #include <linux/mca.h>
 #include <linux/root_dev.h>
@@ -1547,6 +1548,23 @@ void __init setup_arch(char **cmdline_p)
 #endif
 }
 
+static __init int add_pcspkr(void)
+{
+	struct platform_device *pd;
+	int ret;
+
+	pd = platform_device_alloc("pcspkr", -1);
+	if (!pd)
+		return -ENOMEM;
+
+	ret = platform_device_add(pd);
+	if (ret)
+		platform_device_put(pd);
+
+	return ret;
+}
+device_initcall(add_pcspkr);
+
 #include "setup_arch_post.h"
 /*
  * Local Variables:

trunk/arch/mips/Kconfig

@@ -233,6 +233,7 @@ config MACH_JAZZ
 	select ARC32
 	select ARCH_MAY_HAVE_PC_FDC
 	select GENERIC_ISA_DMA
+	select I8253
 	select I8259
 	select ISA
 	select SYS_HAS_CPU_R4X00
@@ -530,6 +531,7 @@ config QEMU
 	select DMA_COHERENT
 	select GENERIC_ISA_DMA
 	select HAVE_STD_PC_SERIAL_PORT
+	select I8253
 	select I8259
 	select ISA
 	select SWAP_IO_SPACE
@@ -714,6 +716,7 @@ config SNI_RM200_PCI
 	select HAVE_STD_PC_SERIAL_PORT
 	select HW_HAS_EISA
 	select HW_HAS_PCI
+	select I8253
 	select I8259
 	select ISA
 	select SYS_HAS_CPU_R4X00
@@ -1721,6 +1724,9 @@ config MMU
 	bool
 	default y
 
+config I8253
+	bool
+
 source "drivers/pcmcia/Kconfig"
 
 source "drivers/pci/hotplug/Kconfig"

trunk/arch/mips/kernel/Makefile

@@ -59,6 +59,8 @@ obj-$(CONFIG_PROC_FS)		+= proc.o
 
 obj-$(CONFIG_64BIT)		+= cpu-bugs64.o
 
+obj-$(CONFIG_I8253)		+= i8253.o
+
 CFLAGS_cpu-bugs64.o	= $(shell if $(CC) $(CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
 
 EXTRA_AFLAGS := $(CFLAGS)

trunk/arch/mips/kernel/i8253.c

@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2006 IBM Corporation
+ *
+ * Implements device information for i8253 timer chip
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation
+ */
+
+#include <linux/platform_device.h>
+
+static __init int add_pcspkr(void)
+{
+	struct platform_device *pd;
+	int ret;
+
+	pd = platform_device_alloc("pcspkr", -1);
+	if (!pd)
+		return -ENOMEM;
+
+	ret = platform_device_add(pd);
+	if (ret)
+		platform_device_put(pd);
+
+	return ret;
+}
+device_initcall(add_pcspkr);

trunk/arch/powerpc/kernel/lparcfg.c

@@ -37,7 +37,7 @@
 #include <asm/prom.h>
 #include <asm/vdso_datapage.h>
 
-#define MODULE_VERS "1.6"
+#define MODULE_VERS "1.7"
 #define MODULE_NAME "lparcfg"
 
 /* #define LPARCFG_DEBUG */
@@ -149,17 +149,17 @@ static void log_plpar_hcall_return(unsigned long rc, char *tag)
 	if (rc == 0)		/* success, return */
 		return;
 /* check for null tag ? */
-	if (rc == H_Hardware)
+	if (rc == H_HARDWARE)
 		printk(KERN_INFO
 		       "plpar-hcall (%s) failed with hardware fault\n", tag);
-	else if (rc == H_Function)
+	else if (rc == H_FUNCTION)
 		printk(KERN_INFO
 		       "plpar-hcall (%s) failed; function not allowed\n", tag);
-	else if (rc == H_Authority)
+	else if (rc == H_AUTHORITY)
 		printk(KERN_INFO
-		       "plpar-hcall (%s) failed; not authorized to this function\n",
-		       tag);
-	else if (rc == H_Parameter)
+		       "plpar-hcall (%s) failed; not authorized to this"
+		       " function\n", tag);
+	else if (rc == H_PARAMETER)
 		printk(KERN_INFO "plpar-hcall (%s) failed; Bad parameter(s)\n",
 		       tag);
 	else
@@ -209,7 +209,7 @@ static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs)
 	unsigned long dummy;
 	rc = plpar_hcall(H_PIC, 0, 0, 0, 0, pool_idle_time, num_procs, &dummy);
 
-	if (rc != H_Authority)
+	if (rc != H_AUTHORITY)
 		log_plpar_hcall_return(rc, "H_PIC");
 }
 
@@ -242,7 +242,7 @@ static void parse_system_parameter_string(struct seq_file *m)
 {
 	int call_status;
 
-	char *local_buffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
+	unsigned char *local_buffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
 	if (!local_buffer) {
 		printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
 		       __FILE__, __FUNCTION__, __LINE__);
@@ -254,7 +254,8 @@ static void parse_system_parameter_string(struct seq_file *m)
 	call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,
 				NULL,
 				SPLPAR_CHARACTERISTICS_TOKEN,
-				__pa(rtas_data_buf));
+				__pa(rtas_data_buf),
+				RTAS_DATA_BUF_SIZE);
 	memcpy(local_buffer, rtas_data_buf, SPLPAR_MAXLENGTH);
 	spin_unlock(&rtas_data_buf_lock);
 
@@ -275,7 +276,7 @@ static void parse_system_parameter_string(struct seq_file *m)
 #ifdef LPARCFG_DEBUG
 		printk(KERN_INFO "success calling get-system-parameter \n");
 #endif
-		splpar_strlen = local_buffer[0] * 16 + local_buffer[1];
+		splpar_strlen = local_buffer[0] * 256 + local_buffer[1];
 		local_buffer += 2;	/* step over strlen value */
 
 		memset(workbuffer, 0, SPLPAR_MAXLENGTH);
@@ -529,13 +530,13 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
 	retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr,
 				    *new_weight_ptr);
 
-	if (retval == H_Success || retval == H_Constrained) {
+	if (retval == H_SUCCESS || retval == H_CONSTRAINED) {
 		retval = count;
-	} else if (retval == H_Busy) {
+	} else if (retval == H_BUSY) {
 		retval = -EBUSY;
-	} else if (retval == H_Hardware) {
+	} else if (retval == H_HARDWARE) {
 		retval = -EIO;
-	} else if (retval == H_Parameter) {
+	} else if (retval == H_PARAMETER) {
 		retval = -EINVAL;
 	} else {
 		printk(KERN_WARNING "%s: received unknown hv return code %ld",

trunk/arch/powerpc/kernel/rtas.c

@@ -578,26 +578,26 @@ static void rtas_percpu_suspend_me(void *info)
 	 * We use "waiting" to indicate our state.  As long
 	 * as it is >0, we are still trying to all join up.
 	 * If it goes to 0, we have successfully joined up and
-	 * one thread got H_Continue.  If any error happens,
+	 * one thread got H_CONTINUE.  If any error happens,
 	 * we set it to <0.
 	 */
 	local_irq_save(flags);
 	do {
 		rc = plpar_hcall_norets(H_JOIN);
 		smp_rmb();
-	} while (rc == H_Success && data->waiting > 0);
-	if (rc == H_Success)
+	} while (rc == H_SUCCESS && data->waiting > 0);
+	if (rc == H_SUCCESS)
 		goto out;
 
-	if (rc == H_Continue) {
+	if (rc == H_CONTINUE) {
 		data->waiting = 0;
 		data->args->args[data->args->nargs] =
 			rtas_call(ibm_suspend_me_token, 0, 1, NULL);
 		for_each_possible_cpu(i)
 			plpar_hcall_norets(H_PROD,i);
 	} else {
 		data->waiting = -EBUSY;
-		printk(KERN_ERR "Error on H_Join hypervisor call\n");
+		printk(KERN_ERR "Error on H_JOIN hypervisor call\n");
 	}
 
 out:
@@ -624,7 +624,7 @@ static int rtas_ibm_suspend_me(struct rtas_args *args)
 		printk(KERN_ERR "Error doing global join\n");
 
 	/* Prod each CPU.  This won't hurt, and will wake
-	 * anyone we successfully put to sleep with H_Join
+	 * anyone we successfully put to sleep with H_JOIN.
 	 */
 	for_each_possible_cpu(i)
 		plpar_hcall_norets(H_PROD, i);

trunk/arch/powerpc/kernel/setup-common.c

@@ -21,6 +21,7 @@
 #include <linux/reboot.h>
 #include <linux/delay.h>
 #include <linux/initrd.h>
+#include <linux/platform_device.h>
 #include <linux/ide.h>
 #include <linux/seq_file.h>
 #include <linux/ioport.h>
@@ -462,6 +463,29 @@ static int __init early_xmon(char *p)
 early_param("xmon", early_xmon);
 #endif
 
+static __init int add_pcspkr(void)
+{
+	struct device_node *np;
+	struct platform_device *pd;
+	int ret;
+
+	np = of_find_compatible_node(NULL, NULL, "pnpPNP,100");
+	of_node_put(np);
+	if (!np)
+		return -ENODEV;
+
+	pd = platform_device_alloc("pcspkr", -1);
+	if (!pd)
+		return -ENOMEM;
+
+	ret = platform_device_add(pd);
+	if (ret)
+		platform_device_put(pd);
+
+	return ret;
+}
+device_initcall(add_pcspkr);
+
 void probe_machine(void)
 {
 	extern struct machdep_calls __machine_desc_start;

trunk/arch/powerpc/kernel/setup_32.c

@@ -50,7 +50,6 @@
 #include <asm/kgdb.h>
 #endif
 
-extern void platform_init(void);
 extern void bootx_init(unsigned long r4, unsigned long phys);
 
 boot_infos_t *boot_infos;
@@ -138,12 +137,7 @@ void __init machine_init(unsigned long dt_ptr, unsigned long phys)
 		strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line));
 #endif /* CONFIG_CMDLINE */
 
-#ifdef CONFIG_PPC_MULTIPLATFORM
 	probe_machine();
-#else
-	/* Base init based on machine type. Obsoloete, please kill ! */
-	platform_init();
-#endif
 
 #ifdef CONFIG_6xx
 	if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||