---

yaml
---
r: 185238
b: refs/heads/master
c: 2a8f82c
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 6219c047d3fe18dee4916d6898fc94f5a7ffd156
+refs/heads/master: 2a8f82c4ceaffcfd64531dbdee1d1bc227387882

trunk/drivers/usb/host/xhci-dbg.c

@@ -406,6 +406,25 @@ static void dbg_rsvd64(struct xhci_hcd *xhci, u64 *ctx, dma_addr_t dma)
 	}
 }
 
+inline char *xhci_get_slot_state(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *ctx)
+{
+	struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx);
+
+	switch (GET_SLOT_STATE(slot_ctx->dev_state)) {
+	case 0:
+		return "enabled/disabled";
+	case 1:
+		return "default";
+	case 2:
+		return "addressed";
+	case 3:
+		return "configured";
+	default:
+		return "reserved";
+	}
+}
+
 void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx)
 {
 	/* Fields are 32 bits wide, DMA addresses are in bytes */

trunk/drivers/usb/host/xhci-hcd.c

@@ -1442,6 +1442,131 @@ void xhci_endpoint_reset(struct usb_hcd *hcd,
 		xhci_warn(xhci, "FIXME allocate a new ring segment\n");
 }
 
+/*
+ * This submits a Reset Device Command, which will set the device state to 0,
+ * set the device address to 0, and disable all the endpoints except the default
+ * control endpoint.  The USB core should come back and call
+ * xhci_address_device(), and then re-set up the configuration.  If this is
+ * called because of a usb_reset_and_verify_device(), then the old alternate
+ * settings will be re-installed through the normal bandwidth allocation
+ * functions.
+ *
+ * Wait for the Reset Device command to finish.  Remove all structures
+ * associated with the endpoints that were disabled.  Clear the input device
+ * structure?  Cache the rings?  Reset the control endpoint 0 max packet size?
+ */
+int xhci_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	int ret, i;
+	unsigned long flags;
+	struct xhci_hcd *xhci;
+	unsigned int slot_id;
+	struct xhci_virt_device *virt_dev;
+	struct xhci_command *reset_device_cmd;
+	int timeleft;
+	int last_freed_endpoint;
+
+	ret = xhci_check_args(hcd, udev, NULL, 0, __func__);
+	if (ret <= 0)
+		return ret;
+	xhci = hcd_to_xhci(hcd);
+	slot_id = udev->slot_id;
+	virt_dev = xhci->devs[slot_id];
+	if (!virt_dev) {
+		xhci_dbg(xhci, "%s called with invalid slot ID %u\n",
+				__func__, slot_id);
+		return -EINVAL;
+	}
+
+	xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id);
+	/* Allocate the command structure that holds the struct completion.
+	 * Assume we're in process context, since the normal device reset
+	 * process has to wait for the device anyway.  Storage devices are
+	 * reset as part of error handling, so use GFP_NOIO instead of
+	 * GFP_KERNEL.
+	 */
+	reset_device_cmd = xhci_alloc_command(xhci, false, true, GFP_NOIO);
+	if (!reset_device_cmd) {
+		xhci_dbg(xhci, "Couldn't allocate command structure.\n");
+		return -ENOMEM;
+	}
+
+	/* Attempt to submit the Reset Device command to the command ring */
+	spin_lock_irqsave(&xhci->lock, flags);
+	reset_device_cmd->command_trb = xhci->cmd_ring->enqueue;
+	list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list);
+	ret = xhci_queue_reset_device(xhci, slot_id);
+	if (ret) {
+		xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
+		list_del(&reset_device_cmd->cmd_list);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		goto command_cleanup;
+	}
+	xhci_ring_cmd_db(xhci);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	/* Wait for the Reset Device command to finish */
+	timeleft = wait_for_completion_interruptible_timeout(
+			reset_device_cmd->completion,
+			USB_CTRL_SET_TIMEOUT);
+	if (timeleft <= 0) {
+		xhci_warn(xhci, "%s while waiting for reset device command\n",
+				timeleft == 0 ? "Timeout" : "Signal");
+		spin_lock_irqsave(&xhci->lock, flags);
+		/* The timeout might have raced with the event ring handler, so
+		 * only delete from the list if the item isn't poisoned.
+		 */
+		if (reset_device_cmd->cmd_list.next != LIST_POISON1)
+			list_del(&reset_device_cmd->cmd_list);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		ret = -ETIME;
+		goto command_cleanup;
+	}
+
+	/* The Reset Device command can't fail, according to the 0.95/0.96 spec,
+	 * unless we tried to reset a slot ID that wasn't enabled,
+	 * or the device wasn't in the addressed or configured state.
+	 */
+	ret = reset_device_cmd->status;
+	switch (ret) {
+	case COMP_EBADSLT: /* 0.95 completion code for bad slot ID */
+	case COMP_CTX_STATE: /* 0.96 completion code for same thing */
+		xhci_info(xhci, "Can't reset device (slot ID %u) in %s state\n",
+				slot_id,
+				xhci_get_slot_state(xhci, virt_dev->out_ctx));
+		xhci_info(xhci, "Not freeing device rings.\n");
+		/* Don't treat this as an error.  May change my mind later. */
+		ret = 0;
+		goto command_cleanup;
+	case COMP_SUCCESS:
+		xhci_dbg(xhci, "Successful reset device command.\n");
+		break;
+	default:
+		if (xhci_is_vendor_info_code(xhci, ret))
+			break;
+		xhci_warn(xhci, "Unknown completion code %u for "
+				"reset device command.\n", ret);
+		ret = -EINVAL;
+		goto command_cleanup;
+	}
+
+	/* Everything but endpoint 0 is disabled, so free or cache the rings. */
+	last_freed_endpoint = 1;
+	for (i = 1; i < 31; ++i) {
+		if (!virt_dev->eps[i].ring)
+			continue;
+		xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
+		last_freed_endpoint = i;
+	}
+	xhci_dbg(xhci, "Output context after successful reset device cmd:\n");
+	xhci_dbg_ctx(xhci, virt_dev->out_ctx, last_freed_endpoint);
+	ret = 0;
+
+command_cleanup:
+	xhci_free_command(xhci, reset_device_cmd);
+	return ret;
+}
+
 /*
  * At this point, the struct usb_device is about to go away, the device has
  * disconnected, and all traffic has been stopped and the endpoints have been

trunk/drivers/usb/host/xhci-ring.c

@@ -953,6 +953,17 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
 	case TRB_TYPE(TRB_RESET_EP):
 		handle_reset_ep_completion(xhci, event, xhci->cmd_ring->dequeue);
 		break;
+	case TRB_TYPE(TRB_RESET_DEV):
+		xhci_dbg(xhci, "Completed reset device command.\n");
+		slot_id = TRB_TO_SLOT_ID(
+				xhci->cmd_ring->dequeue->generic.field[3]);
+		virt_dev = xhci->devs[slot_id];
+		if (virt_dev)
+			handle_cmd_in_cmd_wait_list(xhci, virt_dev, event);
+		else
+			xhci_warn(xhci, "Reset device command completion "
+					"for disabled slot %u\n", slot_id);
+		break;
 	default:
 		/* Skip over unknown commands on the event ring */
 		xhci->error_bitmask |= 1 << 6;
@@ -2189,6 +2200,14 @@ int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 			false);
 }
 
+/* Queue a reset device command TRB */
+int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id)
+{
+	return queue_command(xhci, 0, 0, 0,
+			TRB_TYPE(TRB_RESET_DEV) | SLOT_ID_FOR_TRB(slot_id),
+			false);
+}
+
 /* Queue a configure endpoint command TRB */
 int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 		u32 slot_id, bool command_must_succeed)

trunk/drivers/usb/host/xhci.h

@@ -1210,6 +1210,8 @@ void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst);
 void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci);
 void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring);
 void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep);
+inline char *xhci_get_slot_state(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *ctx);
 
 /* xHCI memory management */
 void xhci_mem_cleanup(struct xhci_hcd *xhci);
@@ -1298,6 +1300,7 @@ int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 		u32 slot_id);
 int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
 		unsigned int ep_index);
+int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id);
 void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 		unsigned int slot_id, unsigned int ep_index,
 		struct xhci_td *cur_td, struct xhci_dequeue_state *state);