---

yaml
---
r: 361727
b: refs/heads/master
c: ca0ba26
h: refs/heads/master
i:
  361725: 8ca8865
  361723: 3d4581b
  361719: 2fab1cc
  361711: 340eb8f
  361695: 7ea2d4a
  361663: 5d919a9
  361599: 445f1b1
  361471: 5fc232c
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 625f6ac9cf2aa567e398a6c9a70cc8c33e0a054f
+refs/heads/master: ca0ba26fbbd2d81c43085df49ce0abfe34535a90

trunk/Documentation/devicetree/bindings/mfd/ab8500.txt

@@ -13,6 +13,9 @@ Required parent device properties:
                                   4 = active high level-sensitive
                                   8 = active low level-sensitive
 
+Optional parent device properties:
+- reg                    : contains the PRCMU mailbox address for the AB8500 i2c port
+
 The AB8500 consists of a large and varied group of sub-devices:
 
 Device                     IRQ Names              Supply Names   Description
@@ -83,8 +86,9 @@ Non-standard child device properties:
    - stericsson,amic2-bias-vamic1           : Analoge Mic wishes to use a non-standard Vamic
    - stericsson,earpeice-cmv                : Earpeice voltage (only: 950 | 1100 | 1270 | 1580)
 
-ab8500 {
+ab8500@5 {
          compatible = "stericsson,ab8500";
+         reg = <5>; /* mailbox 5 is i2c */
          interrupts = <0 40 0x4>;
          interrupt-controller;
          #interrupt-cells = <2>;

trunk/Documentation/devicetree/bindings/tty/serial/of-serial.txt

@@ -11,9 +11,6 @@ Required properties:
 	- "nvidia,tegra20-uart"
 	- "nxp,lpc3220-uart"
 	- "ibm,qpace-nwp-serial"
-	- "altr,16550-FIFO32"
-	- "altr,16550-FIFO64"
-	- "altr,16550-FIFO128"
 	- "serial" if the port type is unknown.
 - reg : offset and length of the register set for the device.
 - interrupts : should contain uart interrupt.

trunk/Documentation/input/alps.txt

@@ -3,26 +3,10 @@ ALPS Touchpad Protocol
 
 Introduction
 ------------
-Currently the ALPS touchpad driver supports five protocol versions in use by
-ALPS touchpads, called versions 1, 2, 3, 4 and 5.
-
-Since roughly mid-2010 several new ALPS touchpads have been released and
-integrated into a variety of laptops and netbooks.  These new touchpads
-have enough behavior differences that the alps_model_data definition
-table, describing the properties of the different versions, is no longer
-adequate.  The design choices were to re-define the alps_model_data
-table, with the risk of regression testing existing devices, or isolate
-the new devices outside of the alps_model_data table.  The latter design
-choice was made.  The new touchpad signatures are named: "Rushmore",
-"Pinnacle", and "Dolphin", which you will see in the alps.c code.
-For the purposes of this document, this group of ALPS touchpads will
-generically be called "new ALPS touchpads".
-
-We experimented with probing the ACPI interface _HID (Hardware ID)/_CID
-(Compatibility ID) definition as a way to uniquely identify the
-different ALPS variants but there did not appear to be a 1:1 mapping.
-In fact, it appeared to be an m:n mapping between the _HID and actual
-hardware type.
+
+Currently the ALPS touchpad driver supports four protocol versions in use by
+ALPS touchpads, called versions 1, 2, 3, and 4. Information about the various
+protocol versions is contained in the following sections.
 
 Detection
 ---------
@@ -36,13 +20,9 @@ If the E6 report is successful, the touchpad model is identified using the "E7
 report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is
 matched against known models in the alps_model_data_array.
 
-For older touchpads supporting protocol versions 3 and 4, the E7 report
-model signature is always 73-02-64. To differentiate between these
-versions, the response from the "Enter Command Mode" sequence must be
-inspected as described below.
-
-The new ALPS touchpads have an E7 signature of 73-03-50 or 73-03-0A but
-seem to be better differentiated by the EC Command Mode response.
+With protocol versions 3 and 4, the E7 report model signature is always
+73-02-64. To differentiate between these versions, the response from the
+"Enter Command Mode" sequence must be inspected as described below.
 
 Command Mode
 ------------
@@ -67,14 +47,6 @@ address of the register being read, and the third contains the value of the
 register. Registers are written by writing the value one nibble at a time
 using the same encoding used for addresses.
 
-For the new ALPS touchpads, the EC command is used to enter command
-mode. The response in the new ALPS touchpads is significantly different,
-and more important in determining the behavior.  This code has been
-separated from the original alps_model_data table and put in the
-alps_identify function.  For example, there seem to be two hardware init
-sequences for the "Dolphin" touchpads as determined by the second byte
-of the EC response.
-
 Packet Format
 -------------
 
@@ -215,28 +187,3 @@ There are several things worth noting here.
     well.
 
 So far no v4 devices with tracksticks have been encountered.
-
-ALPS Absolute Mode - Protocol Version 5
----------------------------------------
-This is basically Protocol Version 3 but with different logic for packet
-decode.  It uses the same alps_process_touchpad_packet_v3 call with a
-specialized decode_fields function pointer to correctly interpret the
-packets.  This appears to only be used by the Dolphin devices.
-
-For single-touch, the 6-byte packet format is:
-
- byte 0:    1    1    0    0    1    0    0    0
- byte 1:    0   x6   x5   x4   x3   x2   x1   x0
- byte 2:    0   y6   y5   y4   y3   y2   y1   y0
- byte 3:    0    M    R    L    1    m    r    l
- byte 4:   y10  y9   y8   y7  x10   x9   x8   x7
- byte 5:    0   z6   z5   z4   z3   z2   z1   z0
-
-For mt, the format is:
-
- byte 0:    1    1    1    n3   1   n2   n1   x24
- byte 1:    1   y7   y6    y5  y4   y3   y2    y1
- byte 2:    ?   x2   x1   y12 y11  y10   y9    y8
- byte 3:    0  x23  x22   x21 x20  x19  x18   x17
- byte 4:    0   x9   x8    x7  x6   x5   x4    x3
- byte 5:    0  x16  x15   x14 x13  x12  x11   x10

trunk/Documentation/networking/tuntap.txt

@@ -105,83 +105,6 @@ Copyright (C) 1999-2000 Maxim Krasnyansky <max_mk@yahoo.com>
      Proto [2 bytes]
      Raw protocol(IP, IPv6, etc) frame.
 
-  3.3 Multiqueue tuntap interface:
-
-  From version 3.8, Linux supports multiqueue tuntap which can uses multiple
-  file descriptors (queues) to parallelize packets sending or receiving. The
-  device allocation is the same as before, and if user wants to create multiple
-  queues, TUNSETIFF with the same device name must be called many times with
-  IFF_MULTI_QUEUE flag.
-
-  char *dev should be the name of the device, queues is the number of queues to
-  be created, fds is used to store and return the file descriptors (queues)
-  created to the caller. Each file descriptor were served as the interface of a
-  queue which could be accessed by userspace.
-
-  #include <linux/if.h>
-  #include <linux/if_tun.h>
-
-  int tun_alloc_mq(char *dev, int queues, int *fds)
-  {
-      struct ifreq ifr;
-      int fd, err, i;
-
-      if (!dev)
-          return -1;
-
-      memset(&ifr, 0, sizeof(ifr));
-      /* Flags: IFF_TUN   - TUN device (no Ethernet headers)
-       *        IFF_TAP   - TAP device
-       *
-       *        IFF_NO_PI - Do not provide packet information
-       *        IFF_MULTI_QUEUE - Create a queue of multiqueue device
-       */
-      ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_MULTI_QUEUE;
-      strcpy(ifr.ifr_name, dev);
-
-      for (i = 0; i < queues; i++) {
-          if ((fd = open("/dev/net/tun", O_RDWR)) < 0)
-             goto err;
-          err = ioctl(fd, TUNSETIFF, (void *)&ifr);
-          if (err) {
-             close(fd);
-             goto err;
-          }
-          fds[i] = fd;
-      }
-
-      return 0;
-  err:
-      for (--i; i >= 0; i--)
-          close(fds[i]);
-      return err;
-  }
-
-  A new ioctl(TUNSETQUEUE) were introduced to enable or disable a queue. When
-  calling it with IFF_DETACH_QUEUE flag, the queue were disabled. And when
-  calling it with IFF_ATTACH_QUEUE flag, the queue were enabled. The queue were
-  enabled by default after it was created through TUNSETIFF.
-
-  fd is the file descriptor (queue) that we want to enable or disable, when
-  enable is true we enable it, otherwise we disable it
-
-  #include <linux/if.h>
-  #include <linux/if_tun.h>
-
-  int tun_set_queue(int fd, int enable)
-  {
-      struct ifreq ifr;
-
-      memset(&ifr, 0, sizeof(ifr));
-
-      if (enable)
-         ifr.ifr_flags = IFF_ATTACH_QUEUE;
-      else
-         ifr.ifr_flags = IFF_DETACH_QUEUE;
-
-      return ioctl(fd, TUNSETQUEUE, (void *)&ifr);
-  }
-
 Universal TUN/TAP device driver Frequently Asked Question.
 
 1. What platforms are supported by TUN/TAP driver ?

trunk/Documentation/trace/ftrace.txt

@@ -1873,7 +1873,7 @@ feature:
 
 	status\input  |     0      |     1      |    else    |
 	--------------+------------+------------+------------+
-	not allocated |(do nothing)| alloc+swap |(do nothing)|
+	not allocated |(do nothing)| alloc+swap |   EINVAL   |
 	--------------+------------+------------+------------+
 	allocated     |    free    |    swap    |   clear    |
 	--------------+------------+------------+------------+

trunk/MAINTAINERS

@@ -4005,22 +4005,6 @@ M:	Stanislaw Gruszka <stf_xl@wp.pl>
 S:	Maintained
 F:	drivers/usb/atm/ueagle-atm.c
 
-INA209 HARDWARE MONITOR DRIVER
-M:	Guenter Roeck <linux@roeck-us.net>
-L:	lm-sensors@lm-sensors.org
-S:	Maintained
-F:	Documentation/hwmon/ina209
-F:	Documentation/devicetree/bindings/i2c/ina209.txt
-F:	drivers/hwmon/ina209.c
-
-INA2XX HARDWARE MONITOR DRIVER
-M:	Guenter Roeck <linux@roeck-us.net>
-L:	lm-sensors@lm-sensors.org
-S:	Maintained
-F:	Documentation/hwmon/ina2xx
-F:	drivers/hwmon/ina2xx.c
-F:	include/linux/platform_data/ina2xx.h
-
 INDUSTRY PACK SUBSYSTEM (IPACK)
 M:	Samuel Iglesias Gonsalvez <siglesias@igalia.com>
 M:	Jens Taprogge <jens.taprogge@taprogge.org>
@@ -5114,15 +5098,6 @@ S:	Maintained
 F:	Documentation/hwmon/max6650
 F:	drivers/hwmon/max6650.c
 
-MAX6697 HARDWARE MONITOR DRIVER
-M:	Guenter Roeck <linux@roeck-us.net>
-L:	lm-sensors@lm-sensors.org
-S:	Maintained
-F:	Documentation/hwmon/max6697
-F:	Documentation/devicetree/bindings/i2c/max6697.txt
-F:	drivers/hwmon/max6697.c
-F:	include/linux/platform_data/max6697.h
-
 MAXIRADIO FM RADIO RECEIVER DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
@@ -6437,8 +6412,6 @@ F:	Documentation/networking/LICENSE.qla3xxx
 F:	drivers/net/ethernet/qlogic/qla3xxx.*
 
 QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
-M:	Rajesh Borundia <rajesh.borundia@qlogic.com>
-M:	Shahed Shaikh <shahed.shaikh@qlogic.com>
 M:	Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
 M:	Sony Chacko <sony.chacko@qlogic.com>
 M:	linux-driver@qlogic.com

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 9
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc2
 NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*

trunk/arch/Kconfig

@@ -319,6 +319,13 @@ config ARCH_WANT_OLD_COMPAT_IPC
 	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
 	bool
 
+config HAVE_VIRT_TO_BUS
+	bool
+	help
+	  An architecture should select this if it implements the
+	  deprecated interface virt_to_bus().  All new architectures
+	  should probably not select this.
+
 config HAVE_ARCH_SECCOMP_FILTER
 	bool
 	help

trunk/arch/alpha/Kconfig

@@ -9,7 +9,7 @@ config ALPHA
 	select HAVE_PERF_EVENTS
 	select HAVE_DMA_ATTRS
 	select HAVE_GENERIC_HARDIRQS
-	select VIRT_TO_BUS
+	select HAVE_VIRT_TO_BUS
 	select GENERIC_IRQ_PROBE
 	select AUTO_IRQ_AFFINITY if SMP
 	select GENERIC_IRQ_SHOW

trunk/arch/arm/Kconfig

@@ -49,7 +49,7 @@ config ARM
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_UID16
-	select VIRT_TO_BUS
+	select HAVE_VIRT_TO_BUS
 	select KTIME_SCALAR
 	select PERF_USE_VMALLOC
 	select RTC_LIB
@@ -556,6 +556,7 @@ config ARCH_IXP4XX
 config ARCH_DOVE
 	bool "Marvell Dove"
 	select ARCH_REQUIRE_GPIOLIB
+	select COMMON_CLK_DOVE
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
@@ -1656,16 +1657,13 @@ config LOCAL_TIMERS
 	  accounting to be spread across the timer interval, preventing a
 	  "thundering herd" at every timer tick.
 
-# The GPIO number here must be sorted by descending number. In case of
-# a multiplatform kernel, we just want the highest value required by the
-# selected platforms.
 config ARCH_NR_GPIO
 	int
 	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
-	default 512 if SOC_OMAP5
 	default 355 if ARCH_U8500
-	default 288 if ARCH_VT8500 || ARCH_SUNXI
 	default 264 if MACH_H4700
+	default 512 if SOC_OMAP5
+	default 288 if ARCH_VT8500 || ARCH_SUNXI
 	default 0
 	help
 	  Maximum number of GPIOs in the system.
@@ -1889,9 +1887,8 @@ config XEN_DOM0
 
 config XEN
 	bool "Xen guest support on ARM (EXPERIMENTAL)"
-	depends on ARM && AEABI && OF
+	depends on ARM && OF
 	depends on CPU_V7 && !CPU_V6
-	depends on !GENERIC_ATOMIC64
 	help
 	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
 

trunk/arch/arm/Kconfig.debug

@@ -492,7 +492,7 @@ config DEBUG_IMX_UART_PORT
 						DEBUG_IMX31_UART || \
 						DEBUG_IMX35_UART || \
 						DEBUG_IMX51_UART || \
-						DEBUG_IMX53_UART || \
+						DEBUG_IMX50_IMX53_UART || \
 						DEBUG_IMX6Q_UART
 	default 1
 	help

trunk/arch/arm/boot/Makefile

@@ -115,4 +115,4 @@ i:
 	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
 	$(obj)/Image System.map "$(INSTALL_PATH)"
 
-subdir-	    := bootp compressed dts
+subdir-	    := bootp compressed

trunk/arch/arm/boot/dts/armada-370-rd.dts

@@ -64,13 +64,5 @@
 			status = "okay";
 			/* No CD or WP GPIOs */
 		};
-
-		usb@d0050000 {
-			status = "okay";
-		};
-
-		usb@d0051000 {
-			status = "okay";
-		};
 	};
 };