---

yaml --- r: 32019 b: refs/heads/master c: 5f765b8 h: refs/heads/master i: 32017: 03e263b 32015: 3551959 v: v3
git-mirror · Jul 1, 2006 · 4b6d3db · 4b6d3db
1 parent 860c6b3
commit 4b6d3db
Show file tree

Hide file tree

Showing 3,363 changed files with 12,132 additions and 12,437 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: d07a8577f695c807977af003b6e75f996e01a15f
+refs/heads/master: 5f765b8d68fe99c8a575265d81c62382893e1e8a
diff --git a/trunk/Documentation/DocBook/mtdnand.tmpl b/trunk/Documentation/DocBook/mtdnand.tmpl
@@ -189,9 +189,9 @@ static unsigned long baseaddr;
 	<sect1>
 		<title>Partition defines</title>
 		<para>
-			If you want to divide your device into parititions, then
-			enable the configuration switch CONFIG_MTD_PARITIONS and define
-			a paritioning scheme suitable to your board.
+			If you want to divide your device into partitions, then
+			enable the configuration switch CONFIG_MTD_PARTITIONS and define
+			a partitioning scheme suitable to your board.
 		</para>
 		<programlisting>
 #define NUM_PARTITIONS 2

diff --git a/trunk/Documentation/IPMI.txt b/trunk/Documentation/IPMI.txt
@@ -10,7 +10,7 @@ standard for controlling intelligent devices that monitor a system.
 It provides for dynamic discovery of sensors in the system and the
 ability to monitor the sensors and be informed when the sensor's
 values change or go outside certain boundaries.  It also has a
-standardized database for field-replacable units (FRUs) and a watchdog
+standardized database for field-replaceable units (FRUs) and a watchdog
 timer.
 
 To use this, you need an interface to an IPMI controller in your
@@ -64,7 +64,7 @@ situation, you need to read the section below named 'The SI Driver' or
 IPMI defines a standard watchdog timer.  You can enable this with the
 'IPMI Watchdog Timer' config option.  If you compile the driver into
 the kernel, then via a kernel command-line option you can have the
-watchdog timer start as soon as it intitializes.  It also have a lot
+watchdog timer start as soon as it initializes.  It also have a lot
 of other options, see the 'Watchdog' section below for more details.
 Note that you can also have the watchdog continue to run if it is
 closed (by default it is disabled on close).  Go into the 'Watchdog

diff --git a/trunk/Documentation/arm/IXP4xx b/trunk/Documentation/arm/IXP4xx
@@ -85,7 +85,7 @@ IXP4xx provides two methods of accessing PCI memory space:
 2) If > 64MB of memory space is required, the IXP4xx can be 
    configured to use indirect registers to access PCI This allows 
    for up to 128MB (0x48000000 to 0x4fffffff) of memory on the bus. 
-   The disadvantadge of this is that every PCI access requires 
+   The disadvantage of this is that every PCI access requires 
    three local register accesses plus a spinlock, but in some 
    cases the performance hit is acceptable. In addition, you cannot 
    mmap() PCI devices in this case due to the indirect nature

diff --git a/trunk/Documentation/digiepca.txt b/trunk/Documentation/digiepca.txt
@@ -2,7 +2,7 @@ NOTE:  This driver is obsolete.  Digi provides a 2.6 driver (dgdm) at
 http://www.digi.com for PCI cards.  They no longer maintain this driver,
 and have no 2.6 driver for ISA cards.
 
-This driver requires a number of user-space tools.  They can be aquired from
+This driver requires a number of user-space tools.  They can be acquired from
 http://www.digi.com, but only works with 2.4 kernels.
 
 

diff --git a/trunk/Documentation/filesystems/configfs/configfs_example.c b/trunk/Documentation/filesystems/configfs/configfs_example.c
@@ -264,6 +264,15 @@ static struct config_item_type simple_child_type = {
 };
 
 
+struct simple_children {
+	struct config_group group;
+};
+
+static inline struct simple_children *to_simple_children(struct config_item *item)
+{
+	return item ? container_of(to_config_group(item), struct simple_children, group) : NULL;
+}
+
 static struct config_item *simple_children_make_item(struct config_group *group, const char *name)
 {
 	struct simple_child *simple_child;
@@ -304,7 +313,13 @@ static ssize_t simple_children_attr_show(struct config_item *item,
 "items have only one attribute that is readable and writeable.\n");
 }
 
+static void simple_children_release(struct config_item *item)
+{
+	kfree(to_simple_children(item));
+}
+
 static struct configfs_item_operations simple_children_item_ops = {
+	.release 	= simple_children_release,
 	.show_attribute	= simple_children_attr_show,
 };
 
@@ -345,10 +360,6 @@ static struct configfs_subsystem simple_children_subsys = {
  * children of its own.
  */
 
-struct simple_children {
-	struct config_group group;
-};
-
 static struct config_group *group_children_make_group(struct config_group *group, const char *name)
 {
 	struct simple_children *simple_children;

diff --git a/trunk/Documentation/memory-barriers.txt b/trunk/Documentation/memory-barriers.txt
@@ -602,7 +602,7 @@ Consider the following sequence of events:
 
 This sequence of events is committed to the memory coherence system in an order
 that the rest of the system might perceive as the unordered set of { STORE A,
-STORE B, STORE C } all occuring before the unordered set of { STORE D, STORE E
+STORE B, STORE C } all occurring before the unordered set of { STORE D, STORE E
 }:
 
 	+-------+       :      :

diff --git a/trunk/Documentation/networking/pktgen.txt b/trunk/Documentation/networking/pktgen.txt
@@ -74,7 +74,7 @@ Examples:
  pgset "pkt_size 9014"   sets packet size to 9014
  pgset "frags 5"         packet will consist of 5 fragments
  pgset "count 200000"    sets number of packets to send, set to zero
-                         for continious sends untill explicitl stopped.
+                         for continuous sends until explicitly stopped.
 
  pgset "delay 5000"      adds delay to hard_start_xmit(). nanoseconds
 

diff --git a/trunk/Documentation/pcmcia/crc32hash.c b/trunk/Documentation/pcmcia/crc32hash.c
@@ -0,0 +1,32 @@
+/* crc32hash.c - derived from linux/lib/crc32.c, GNU GPL v2 */
+/* Usage example:
+$ ./crc32hash "Dual Speed"
+*/
+
+#include <string.h>
+#include <stdio.h>
+#include <ctype.h>
+#include <stdlib.h>
+
+unsigned int crc32(unsigned char const *p, unsigned int len)
+{
+	int i;
+	unsigned int crc = 0;
+	while (len--) {
+		crc ^= *p++;
+		for (i = 0; i < 8; i++)
+			crc = (crc >> 1) ^ ((crc & 1) ? 0xedb88320 : 0);
+	}
+	return crc;
+}
+
+int main(int argc, char **argv) {
+	unsigned int result;
+	if (argc != 2) {
+		printf("no string passed as argument\n");
+		return -1;
+	}
+	result = crc32(argv[1], strlen(argv[1]));
+	printf("0x%x\n", result);
+	return 0;
+}
diff --git a/trunk/Documentation/pcmcia/devicetable.txt b/trunk/Documentation/pcmcia/devicetable.txt
@@ -27,37 +27,7 @@ pcmcia:m0149cC1ABf06pfn00fn00pa725B842DpbF1EFEE84pc0877B627pd00000000
 The hex value after "pa" is the hash of product ID string 1, after "pb" for
 string 2 and so on.
 
-Alternatively, you can use this small tool to determine the crc32 hash.
-simply pass the string you want to evaluate as argument to this program,
-e.g.
+Alternatively, you can use crc32hash (see Documentation/pcmcia/crc32hash.c)
+to determine the crc32 hash.  Simply pass the string you want to evaluate
+as argument to this program, e.g.:
 $ ./crc32hash "Dual Speed"
-
--------------------------------------------------------------------------
-/* crc32hash.c - derived from linux/lib/crc32.c, GNU GPL v2 */
-#include <string.h>
-#include <stdio.h>
-#include <ctype.h>
-#include <stdlib.h>
-
-unsigned int crc32(unsigned char const *p, unsigned int len)
-{
-	int i;
-	unsigned int crc = 0;
-	while (len--) {
-		crc ^= *p++;
-		for (i = 0; i < 8; i++)
-			crc = (crc >> 1) ^ ((crc & 1) ? 0xedb88320 : 0);
-	}
-	return crc;
-}
-
-int main(int argc, char **argv) {
-	unsigned int result;
-	if (argc != 2) {
-		printf("no string passed as argument\n");
-		return -1;
-	}
-	result = crc32(argv[1], strlen(argv[1]));
-	printf("0x%x\n", result);
-	return 0;
-}
diff --git a/trunk/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/trunk/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
@@ -3048,7 +3048,7 @@ struct _snd_pcm_runtime {
         </para>
 
         <para>
-          If you aquire a spinlock in the interrupt handler, and the
+          If you acquire a spinlock in the interrupt handler, and the
         lock is used in other pcm callbacks, too, then you have to
         release the lock before calling
         <function>snd_pcm_period_elapsed()</function>, because

diff --git a/trunk/Documentation/sysctl/vm.txt b/trunk/Documentation/sysctl/vm.txt
@@ -28,7 +28,6 @@ Currently, these files are in /proc/sys/vm:
 - block_dump
 - drop-caches
 - zone_reclaim_mode
-- zone_reclaim_interval
 - panic_on_oom
 
 ==============================================================
@@ -167,18 +166,6 @@ use of files and builds up large slab caches. However, the slab
 shrink operation is global, may take a long time and free slabs
 in all nodes of the system.
 
-================================================================
-
-zone_reclaim_interval:
-
-The time allowed for off node allocations after zone reclaim
-has failed to reclaim enough pages to allow a local allocation.
-
-Time is set in seconds and set by default to 30 seconds.
-
-Reduce the interval if undesired off node allocations occur. However, too
-frequent scans will have a negative impact onoff node allocation performance.
-
 =============================================================
 
 panic_on_oom

diff --git a/trunk/Documentation/video4linux/CARDLIST.cx88 b/trunk/Documentation/video4linux/CARDLIST.cx88
@@ -50,3 +50,4 @@
  49 -> PixelView PlayTV P7000                              [1554:4813]
  50 -> NPG Tech Real TV FM Top 10                          [14f1:0842]
  51 -> WinFast DTV2000 H                                   [107d:665e]
+ 52 -> Geniatech DVB-S                                     [14f1:0084]
diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS
@@ -925,23 +925,21 @@ S:	Maintained
 
 EDAC-CORE
 P:	Doug Thompson
-M:	norsk5@xmission.com, dthompson@linuxnetworx.com
-P:	Dave Peterson
-M:	dsp@llnl.gov, dave_peterson@pobox.com
+M:	norsk5@xmission.com
 L:	bluesmoke-devel@lists.sourceforge.net
 W:	bluesmoke.sourceforge.net
-S:	Maintained
+S:	Supported
 
 EDAC-E752X
-P:	Dave Peterson
-M:	dsp@llnl.gov, dave_peterson@pobox.com
+P:	Mark Gross
+M:	mark.gross@intel.com
 L:	bluesmoke-devel@lists.sourceforge.net
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 
 EDAC-E7XXX
-P:	Dave Peterson
-M:	dsp@llnl.gov, dave_peterson@pobox.com
+P:	Doug Thompson
+M:	norsk5@xmission.com
 L:	bluesmoke-devel@lists.sourceforge.net
 W:	bluesmoke.sourceforge.net
 S:	Maintained
@@ -2557,13 +2555,6 @@ M:	thomas@winischhofer.net
 W:	http://www.winischhofer.at/linuxsisusbvga.shtml
 S:	Maintained
 
-SMB FILESYSTEM
-P:	Urban Widmark
-M:	urban@teststation.com
-W:	http://samba.org/
-L:	samba@samba.org
-S:	Maintained
-
 SMC91x ETHERNET DRIVER
 P:	Nicolas Pitre
 M:	nico@cam.org

diff --git a/trunk/Makefile b/trunk/Makefile
@@ -41,8 +41,9 @@ ifndef KBUILD_VERBOSE
   KBUILD_VERBOSE = 0
 endif
 
-# Call sparse as part of compilation of C files
-# Use 'make C=1' to enable sparse checking
+# Call checker as part of compilation of C files
+# Use 'make C=1' to enable checking (sparse, by default)
+# Override with 'make C=1 CHECK=checker_executable CHECKFLAGS=....'
 
 ifdef C
   ifeq ("$(origin C)", "command line")
@@ -1060,8 +1061,8 @@ help:
 
 	@echo  '  make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
 	@echo  '  make O=dir [targets] Locate all output files in "dir", including .config'
-	@echo  '  make C=1   [targets] Check all c source with $$CHECK (sparse)'
-	@echo  '  make C=2   [targets] Force check of all c source with $$CHECK (sparse)'
+	@echo  '  make C=1   [targets] Check all c source with $$CHECK (sparse by default)'
+	@echo  '  make C=2   [targets] Force check of all c source with $$CHECK'
 	@echo  ''
 	@echo  'Execute "make" or "make all" to build all targets marked with [*] '
 	@echo  'For further info see the ./README file'
@@ -1352,7 +1353,7 @@ quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files))
 
 a_flags = -Wp,-MD,$(depfile) $(AFLAGS) $(AFLAGS_KERNEL) \
 	  $(NOSTDINC_FLAGS) $(CPPFLAGS) \
-	  $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(*F).o)
+	  $(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(basetarget).o)
 
 quiet_cmd_as_o_S = AS      $@
 cmd_as_o_S       = $(CC) $(a_flags) -c -o $@ $<

diff --git a/trunk/arch/alpha/kernel/alpha_ksyms.c b/trunk/arch/alpha/kernel/alpha_ksyms.c
@@ -5,7 +5,6 @@
  * modules.
  */
 
-#include <linux/config.h>
 #include <linux/module.h>
 #include <linux/string.h>
 #include <linux/user.h>

diff --git a/trunk/arch/alpha/kernel/console.c b/trunk/arch/alpha/kernel/console.c
@@ -5,7 +5,6 @@
  * non-0 I/O hose
  */
 
-#include <linux/config.h>
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/tty.h>

diff --git a/trunk/arch/alpha/kernel/entry.S b/trunk/arch/alpha/kernel/entry.S
@@ -4,7 +4,6 @@
  * Kernel entry-points.
  */
 
-#include <linux/config.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 #include <asm/pal.h>

diff --git a/trunk/arch/alpha/kernel/gct.c b/trunk/arch/alpha/kernel/gct.c
@@ -2,7 +2,6 @@
  *	linux/arch/alpha/kernel/gct.c
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/errno.h>

diff --git a/trunk/arch/alpha/kernel/head.S b/trunk/arch/alpha/kernel/head.S
@@ -7,7 +7,6 @@
  * the kernel global pointer and jump to the kernel entry-point.
  */
 
-#include <linux/config.h>
 #include <asm/system.h>
 #include <asm/asm-offsets.h>
 

diff --git a/trunk/arch/alpha/kernel/irq.c b/trunk/arch/alpha/kernel/irq.c
@@ -10,7 +10,6 @@
  * should be easier.
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/errno.h>

diff --git a/trunk/arch/alpha/kernel/irq_alpha.c b/trunk/arch/alpha/kernel/irq_alpha.c
@@ -2,7 +2,6 @@
  * Alpha specific irq code.
  */
 
-#include <linux/config.h>
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/irq.h>

diff --git a/trunk/arch/alpha/kernel/irq_i8259.c b/trunk/arch/alpha/kernel/irq_i8259.c
@@ -7,7 +7,6 @@
  * Started hacking from linux-2.3.30pre6/arch/i386/kernel/i8259.c.
  */
 
-#include <linux/config.h>
 #include <linux/init.h>
 #include <linux/cache.h>
 #include <linux/sched.h>

diff --git a/trunk/arch/alpha/kernel/machvec_impl.h b/trunk/arch/alpha/kernel/machvec_impl.h
@@ -6,7 +6,6 @@
  * This file has goodies to help simplify instantiation of machine vectors.
  */
 
-#include <linux/config.h>
 #include <asm/pgalloc.h>
 
 /* Whee.  These systems don't have an HAE:

diff --git a/trunk/arch/alpha/kernel/pci.c b/trunk/arch/alpha/kernel/pci.c
@@ -12,7 +12,6 @@
  * Nov 2000, Ivan Kokshaysky <ink@jurassic.park.msu.ru>
  *	     PCI-PCI bridges cleanup
  */
-#include <linux/config.h>
 #include <linux/string.h>
 #include <linux/pci.h>
 #include <linux/init.h>

diff --git a/trunk/arch/alpha/kernel/process.c b/trunk/arch/alpha/kernel/process.c
@@ -8,7 +8,6 @@
  * This file handles the architecture-dependent parts of process handling.
  */
 
-#include <linux/config.h>
 #include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/sched.h>

diff --git a/trunk/arch/alpha/kernel/proto.h b/trunk/arch/alpha/kernel/proto.h
@@ -1,4 +1,3 @@
-#include <linux/config.h>
 #include <linux/interrupt.h>
Original file line number	Diff line number	Diff line change
		@@ -1,4 +1,3 @@
		#include <linux/config.h>
		#include <linux/interrupt.h>


Expand Down