Merge tag 'mmc-merge-for-3.3-rc1' of git://git.kernel.org/pub/scm/lin…

…ux/kernel/git/cjb/mmc

MMC highlights for 3.3:

Core:
 * Support for the HS200 high-speed eMMC mode.
 * Support SDIO 3.0 Ultra High Speed cards.
 * Kill pending block requests immediately if card is removed.
 * Enable the eMMC feature for locking boot partitions read-only
   until next power on, exposed via sysfs.

Drivers:
 * Runtime PM support for Intel Medfield SDIO.
 * Suspend/resume support for sdhci-spear.
 * sh-mmcif now processes requests asynchronously.

* tag 'mmc-merge-for-3.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (58 commits)
  mmc: fix a deadlock between system suspend and MMC block IO
  mmc: sdhci: restore the enabled dma when do reset all
  mmc: dw_mmc: miscaculated the fifo-depth with wrong bit operation
  mmc: host: Adds support for eMMC 4.5 HS200 mode
  mmc: core: HS200 mode support for eMMC 4.5
  mmc: dw_mmc: fixed wrong bit operation for SDMMC_GET_FCNT()
  mmc: core: Separate the timeout value for cache-ctrl
  mmc: sdhci-spear: Fix compilation error
  mmc: sdhci: Deal with failure case in sdhci_suspend_host
  mmc: dw_mmc: Clear the DDR mode for non-DDR
  mmc: sd: Fix SDR12 timing regression
  mmc: sdhci: Fix tuning timer incorrect setting when suspending host
  mmc: core: Add option to prevent eMMC sleep command
  mmc: omap_hsmmc: use threaded irq handler for card-detect.
  mmc: sdhci-pci: enable runtime PM for Medfield SDIO
  mmc: sdhci: Always pass clock request value zero to set_clock host op
  mmc: sdhci-pci: remove SDHCI_QUIRK2_OWN_CARD_DETECTION
  mmc: sdhci-pci: get gpio numbers from platform data
  mmc: sdhci-pci: add platform data
  mmc: sdhci: prevent card detection activity for non-removable cards
  ...

Documentation/mmc/mmc-dev-attrs.txt

@@ -64,3 +64,13 @@ Note on Erase Size and Preferred Erase Size:
 	size specified by the card.
 
 	"preferred_erase_size" is in bytes.
+
+SD/MMC/SDIO Clock Gating Attribute
+==================================
+
+Read and write access is provided to following attribute.
+This attribute appears only if CONFIG_MMC_CLKGATE is enabled.
+
+	clkgate_delay	Tune the clock gating delay with desired value in milliseconds.
+
+echo <desired delay> > /sys/class/mmc_host/mmcX/clkgate_delay

Documentation/mmc/mmc-dev-parts.txt

@@ -25,3 +25,16 @@ echo 0 > /sys/block/mmcblkXbootY/force_ro
 To re-enable read-only access:
 
 echo 1 > /sys/block/mmcblkXbootY/force_ro
+
+The boot partitions can also be locked read only until the next power on,
+with:
+
+echo 1 > /sys/block/mmcblkXbootY/ro_lock_until_next_power_on
+
+This is a feature of the card and not of the kernel. If the card does
+not support boot partition locking, the file will not exist. If the
+feature has been disabled on the card, the file will be read-only.
+
+The boot partitions can also be locked permanently, but this feature is
+not accessible through sysfs in order to avoid accidental or malicious
+bricking.

arch/arm/plat-samsung/include/plat/sdhci.h

@@ -63,6 +63,7 @@ enum clk_types {
 struct s3c_sdhci_platdata {
 	unsigned int	max_width;
 	unsigned int	host_caps;
+	unsigned int	pm_caps;
 	enum cd_types	cd_type;
 	enum clk_types	clk_type;
 

arch/arm/plat-samsung/platformdata.c

@@ -53,6 +53,8 @@ void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd,
 		set->cfg_gpio = pd->cfg_gpio;
 	if (pd->host_caps)
 		set->host_caps |= pd->host_caps;
+	if (pd->pm_caps)
+		set->pm_caps |= pd->pm_caps;
 	if (pd->clk_type)
 		set->clk_type = pd->clk_type;
 }

drivers/Makefile

@@ -97,7 +97,7 @@ obj-$(CONFIG_EISA)		+= eisa/
 obj-y				+= lguest/
 obj-$(CONFIG_CPU_FREQ)		+= cpufreq/
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle/
-obj-$(CONFIG_MMC)		+= mmc/
+obj-y				+= mmc/
 obj-$(CONFIG_MEMSTICK)		+= memstick/
 obj-y				+= leds/
 obj-$(CONFIG_INFINIBAND)	+= infiniband/

drivers/mmc/Makefile

@@ -6,5 +6,4 @@ subdir-ccflags-$(CONFIG_MMC_DEBUG) := -DDEBUG
 
 obj-$(CONFIG_MMC)		+= core/
 obj-$(CONFIG_MMC)		+= card/
-obj-$(CONFIG_MMC)		+= host/
-
+obj-$(subst m,y,$(CONFIG_MMC))	+= host/