---

yaml
---
r: 81103
b: refs/heads/master
c: 567e9fd
h: refs/heads/master
i:
  81101: a9258a5
  81099: 74b5057
  81095: ceb8808
  81087: 6efb234
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 00d70419fc8f86db94f56e0191be392c4a57f244
+refs/heads/master: 567e9fdd49bcfa7e15ebc0005853ac5529c81856

trunk/include/asm-powerpc/8xx_immap.h

@@ -123,7 +123,7 @@ typedef struct	mem_ctlr {
 #define OR_G5LA		0x00000400	/* Output #GPL5 on #GPL_A5		*/
 #define OR_G5LS		0x00000200	/* Drive #GPL high on falling edge of...*/
 #define OR_BI		0x00000100	/* Burst inhibit			*/
-#define OR_SCY_MSK	0x000000f0	/* Cycle Lenght in Clocks		*/
+#define OR_SCY_MSK	0x000000f0	/* Cycle Length in Clocks		*/
 #define OR_SCY_0_CLK	0x00000000	/* 0 clock cycles wait states		*/
 #define OR_SCY_1_CLK	0x00000010	/* 1 clock cycles wait states		*/
 #define OR_SCY_2_CLK	0x00000020	/* 2 clock cycles wait states		*/

trunk/include/asm-powerpc/commproc.h

@@ -693,7 +693,7 @@ typedef struct risc_timer_pram {
 #define	CICR_SCC_SCC3		((uint)0x00200000)	/* SCC3 @ SCCc */
 #define	CICR_SCB_SCC2		((uint)0x00040000)	/* SCC2 @ SCCb */
 #define	CICR_SCA_SCC1		((uint)0x00000000)	/* SCC1 @ SCCa */
-#define CICR_IRL_MASK		((uint)0x0000e000)	/* Core interrrupt */
+#define CICR_IRL_MASK		((uint)0x0000e000)	/* Core interrupt */
 #define CICR_HP_MASK		((uint)0x00001f00)	/* Hi-pri int. */
 #define CICR_IEN		((uint)0x00000080)	/* Int. enable */
 #define CICR_SPS		((uint)0x00000001)	/* SCC Spread */

trunk/include/asm-powerpc/iseries/hv_lp_event.h

@@ -78,7 +78,7 @@ extern int HvLpEvent_openPath(HvLpEvent_Type eventType, HvLpIndex lpIndex);
 
 /*
  * Close an Lp Event Path for a type and partition
- * returns 0 on sucess
+ * returns 0 on success
  */
 extern int HvLpEvent_closePath(HvLpEvent_Type eventType, HvLpIndex lpIndex);
 

trunk/include/asm-powerpc/reg_booke.h

@@ -304,7 +304,7 @@
 #define ESR_IMCB	0x20000000	/* Instr. Machine Check - Bus error */
 #define ESR_IMCT	0x10000000	/* Instr. Machine Check - Timeout */
 #define ESR_PIL		0x08000000	/* Program Exception - Illegal */
-#define ESR_PPR		0x04000000	/* Program Exception - Priveleged */
+#define ESR_PPR		0x04000000	/* Program Exception - Privileged */
 #define ESR_PTR		0x02000000	/* Program Exception - Trap */
 #define ESR_FP		0x01000000	/* Floating Point Operation */
 #define ESR_DST		0x00800000	/* Storage Exception - Data miss */

trunk/include/asm-powerpc/smu.h

@@ -22,7 +22,7 @@
  * Partition info commands
  *
  * These commands are used to retrieve the sdb-partition-XX datas from
- * the SMU. The lenght is always 2. First byte is the subcommand code
+ * the SMU. The length is always 2. First byte is the subcommand code
  * and second byte is the partition ID.
  *
  * The reply is 6 bytes:
@@ -176,9 +176,9 @@
  * data length is that of the string.
  *
  * The VSLEW command can be used to get or set the voltage slewing.
- *  - lenght 5 (only "VSLEW") : it returns "DONE" and 3 bytes of
+ *  - length 5 (only "VSLEW") : it returns "DONE" and 3 bytes of
  *    reply at data offset 6, 7 and 8.
- *  - lenght 8 ("VSLEWxyz") has 3 additional bytes appended, and is
+ *  - length 8 ("VSLEWxyz") has 3 additional bytes appended, and is
  *    used to set the voltage slewing point. The SMU replies with "DONE"
  * I yet have to figure out their exact meaning of those 3 bytes in
  * both cases. They seem to be:
@@ -688,13 +688,13 @@ struct smu_user_cmd_hdr
 
 	__u8		cmd;			/* SMU command byte */
 	__u8		pad[3];			/* padding */
-	__u32		data_len;		/* Lenght of data following */
+	__u32		data_len;		/* Length of data following */
 };
 
 struct smu_user_reply_hdr
 {
 	__u32		status;			/* Command status */
-	__u32		reply_len;		/* Lenght of data follwing */
+	__u32		reply_len;		/* Length of data follwing */
 };
 
 #endif /*  _SMU_H */

trunk/include/asm-powerpc/spu.h

@@ -304,7 +304,7 @@ int spu_switch_event_register(struct notifier_block * n);
 int spu_switch_event_unregister(struct notifier_block * n);
 
 /*
- * This defines the Local Store, Problem Area and Privlege Area of an SPU.
+ * This defines the Local Store, Problem Area and Privilege Area of an SPU.
  */
 
 union mfc_tag_size_class_cmd {

trunk/include/asm-powerpc/spu_csa.h

@@ -194,7 +194,7 @@ struct spu_priv1_collapsed {
 };
 
 /*
- * struct spu_priv2_collapsed - condensed priviliged 2 area, w/o pads.
+ * struct spu_priv2_collapsed - condensed privileged 2 area, w/o pads.
  */
 struct spu_priv2_collapsed {
 	u64 slb_index_W;