---

yaml
---
r: 119419
b: refs/heads/master
c: b0788ca
h: refs/heads/master
i:
  119417: f07f6ae
  119415: 973c84a
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 7bbc67fbf60b698b43692fc6ea16c526bf1c5e26
+refs/heads/master: b0788caf7af773b6c2374590dabd3a205f0918a8

trunk/Documentation/cpu-freq/user-guide.txt

@@ -23,7 +23,6 @@ Contents:
 1.3 sparc64
 1.4 ppc
 1.5 SuperH
-1.6 Blackfin
 
 2. "Policy" / "Governor"?
 2.1 Policy
@@ -98,17 +97,6 @@ The following SuperH processors are supported by cpufreq:
 SH-3
 SH-4
 
-1.6 Blackfin
-------------
-
-The following Blackfin processors are supported by cpufreq:
-
-BF522, BF523, BF524, BF525, BF526, BF527, Rev 0.1 or higher
-BF531, BF532, BF533, Rev 0.3 or higher
-BF534, BF536, BF537, Rev 0.2 or higher
-BF561, Rev 0.3 or higher
-BF542, BF544, BF547, BF548, BF549, Rev 0.1 or higher
-
 
 2. "Policy" / "Governor" ?
 ==========================

trunk/Documentation/filesystems/ramfs-rootfs-initramfs.txt

@@ -130,12 +130,12 @@ The 2.6 kernel build process always creates a gzipped cpio format initramfs
 archive and links it into the resulting kernel binary.  By default, this
 archive is empty (consuming 134 bytes on x86).
 
-The config option CONFIG_INITRAMFS_SOURCE (in General Setup in menuconfig,
-and living in usr/Kconfig) can be used to specify a source for the
-initramfs archive, which will automatically be incorporated into the
-resulting binary.  This option can point to an existing gzipped cpio
-archive, a directory containing files to be archived, or a text file
-specification such as the following example:
+The config option CONFIG_INITRAMFS_SOURCE (for some reason buried under
+devices->block devices in menuconfig, and living in usr/Kconfig) can be used
+to specify a source for the initramfs archive, which will automatically be
+incorporated into the resulting binary.  This option can point to an existing
+gzipped cpio archive, a directory containing files to be archived, or a text
+file specification such as the following example:
 
   dir /dev 755 0 0
   nod /dev/console 644 0 0 c 5 1

trunk/Documentation/input/input-programming.txt

@@ -20,11 +20,10 @@ pressed or released a BUTTON_IRQ happens. The driver could look like:
 
 static struct input_dev *button_dev;
 
-static irqreturn_t button_interrupt(int irq, void *dummy)
+static void button_interrupt(int irq, void *dummy, struct pt_regs *fp)
 {
 	input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1);
 	input_sync(button_dev);
-	return IRQ_HANDLED;
 }
 
 static int __init button_init(void)

trunk/Documentation/sound/alsa/ALSA-Configuration.txt

@@ -1072,13 +1072,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  ref		Reference board
 	  dell-m4-1	Dell desktops
 	  dell-m4-2	Dell desktops
-	  dell-m4-3	Dell desktops
 
 	STAC92HD73*
 	  ref		Reference board
-	  dell-m6-amic	Dell desktops/laptops with analog mics
-	  dell-m6-dmic	Dell desktops/laptops with digital mics
-	  dell-m6	Dell desktops/laptops with both type of mics
+	  dell-m6	Dell desktops
 
 	STAC9872
 	  vaio		Setup for VAIO FE550G/SZ110

trunk/Documentation/tracers/mmiotrace.txt

@@ -37,7 +37,7 @@ $ echo mmiotrace > /debug/tracing/current_tracer
 $ cat /debug/tracing/trace_pipe > mydump.txt &
 Start X or whatever.
 $ echo "X is up" > /debug/tracing/trace_marker
-$ echo nop > /debug/tracing/current_tracer
+$ echo none > /debug/tracing/current_tracer
 Check for lost events.
 
 
@@ -66,7 +66,7 @@ which action. It is recommended to place descriptive markers about what you
 do.
 
 Shut down mmiotrace (requires root privileges):
-$ echo nop > /debug/tracing/current_tracer
+$ echo none > /debug/tracing/current_tracer
 The 'cat' process exits. If it does not, kill it by issuing 'fg' command and
 pressing ctrl+c.
 
@@ -81,9 +81,7 @@ are:
 $ cat /debug/tracing/trace_entries
 gives you a number. Approximately double this number and write it back, for
 instance:
-$ echo 0 > /debug/tracing/tracing_enabled
 $ echo 128000 > /debug/tracing/trace_entries
-$ echo 1 > /debug/tracing/tracing_enabled
 Then start again from the top.
 
 If you are doing a trace for a driver project, e.g. Nouveau, you should also

trunk/arch/Kconfig

@@ -79,6 +79,8 @@ config HAVE_KRETPROBES
 #	task_pt_regs()		in asm/processor.h or asm/ptrace.h
 #	arch_has_single_step()	if there is hardware single-step support
 #	arch_has_block_step()	if there is hardware block-step support
+#	arch_ptrace()		and not #define __ARCH_SYS_PTRACE
+#	compat_arch_ptrace()	and #define __ARCH_WANT_COMPAT_SYS_PTRACE
 #	asm/syscall.h		supplying asm-generic/syscall.h interface
 #	linux/regset.h		user_regset interfaces
 #	CORE_DUMP_USE_REGSET	#define'd in linux/elf.h

trunk/arch/alpha/kernel/pci.c

@@ -338,7 +338,7 @@ common_swizzle(struct pci_dev *dev, u8 *pinp)
 	return PCI_SLOT(dev->devfn);
 }
 
-void
+void __devinit
 pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
 			 struct resource *res)
 {

trunk/arch/alpha/kernel/smp.c

@@ -121,7 +121,7 @@ wait_boot_cpu_to_stop(int cpuid)
 /*
  * Where secondaries begin a life of C.
  */
-void __cpuinit
+void __init
 smp_callin(void)
 {
 	int cpuid = hard_smp_processor_id();
@@ -198,7 +198,7 @@ wait_for_txrdy (unsigned long cpumask)
  * Send a message to a secondary's console.  "START" is one such
  * interesting message.  ;-)
  */
-static void __cpuinit
+static void __init
 send_secondary_console_msg(char *str, int cpuid)
 {
 	struct percpu_struct *cpu;
@@ -289,7 +289,7 @@ recv_secondary_console_msg(void)
 /*
  * Convince the console to have a secondary cpu begin execution.
  */
-static int __cpuinit
+static int __init
 secondary_cpu_start(int cpuid, struct task_struct *idle)
 {
 	struct percpu_struct *cpu;

trunk/arch/alpha/kernel/traps.c

@@ -31,7 +31,7 @@
 
 static int opDEC_fix;
 
-static void __cpuinit
+static void __init
 opDEC_check(void)
 {
 	__asm__ __volatile__ (
@@ -1072,7 +1072,7 @@ do_entUnaUser(void __user * va, unsigned long opcode,
 	return;
 }
 
-void __cpuinit
+void __init
 trap_init(void)
 {
 	/* Tell PAL-code what global pointer we want in the kernel.  */

trunk/arch/arm/mach-pxa/include/mach/pxafb.h

@@ -33,7 +33,6 @@
 #define LCD_CONN_TYPE(_x)	((_x) & 0x0f)
 #define LCD_CONN_WIDTH(_x)	(((_x) >> 4) & 0x1f)
 
-#define LCD_TYPE_MASK		0xf
 #define LCD_TYPE_UNKNOWN	0
 #define LCD_TYPE_MONO_STN	1
 #define LCD_TYPE_MONO_DSTN	2

trunk/arch/arm/mach-pxa/reset.c

@@ -90,13 +90,12 @@ void arch_reset(char mode)
 		/* Jump into ROM at address 0 */
 		cpu_reset(0);
 		break;
-	case 'g':
-		do_gpio_reset();
-		break;
 	case 'h':
-	default:
 		do_hw_reset();
 		break;
+	case 'g':
+		do_gpio_reset();
+		break;
 	}
 }
 

trunk/arch/arm/mach-pxa/spitz.c

@@ -67,7 +67,6 @@
 static unsigned long spitz_pin_config[] __initdata = {
 	/* Chip Selects */
 	GPIO78_nCS_2,	/* SCOOP #2 */
-	GPIO79_nCS_3,	/* NAND */
 	GPIO80_nCS_4,	/* SCOOP #1 */
 
 	/* LCD - 16bpp Active TFT */
@@ -98,10 +97,10 @@ static unsigned long spitz_pin_config[] __initdata = {
 	GPIO51_nPIOW,
 	GPIO85_nPCE_1,
 	GPIO54_nPCE_2,
+	GPIO79_PSKTSEL,
 	GPIO55_nPREG,
 	GPIO56_nPWAIT,
 	GPIO57_nIOIS16,
-	GPIO104_PSKTSEL,
 
 	/* MMC */
 	GPIO32_MMC_CLK,
@@ -687,6 +686,7 @@ static void __init akita_init(void)
 	spitz_pcmcia_config.num_devs = 1;
 	platform_scoop_config = &spitz_pcmcia_config;
 
+	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(akita_i2c_board_info));
 
 	common_init();

trunk/arch/ia64/include/asm/ptrace.h

@@ -325,6 +325,8 @@ static inline unsigned long user_stack_pointer(struct pt_regs *regs)
   #define arch_has_block_step()   (1)
   extern void user_enable_block_step(struct task_struct *);
 
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+
 #endif /* !__KERNEL__ */
 
 /* pt_all_user_regs is used for PTRACE_GETREGS PTRACE_SETREGS */

trunk/arch/ia64/sn/kernel/io_init.c

@@ -292,7 +292,7 @@ EXPORT_SYMBOL(sn_io_slot_fixup);
  * sn_pci_controller_fixup() - This routine sets up a bus's resources
  *			       consistent with the Linux PCI abstraction layer.
  */
-static void __init
+static void
 sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
 {
 	s64 status = 0;

trunk/arch/m32r/kernel/head.S

@@ -23,7 +23,7 @@ __INITDATA
 /*
  * References to members of the boot_cpu_data structure.
  */
-.section .text.head, "ax"
+	.text
 	.global	start_kernel
 	.global __bss_start
 	.global _end
@@ -133,6 +133,7 @@ loop1:
 /*
  * AP startup routine
  */
+	.text
 	.global	eit_vector
 ENTRY(startup_AP)
 ;; setup EVB
@@ -229,7 +230,6 @@ ENTRY(startup_AP)
 	nop
 #endif  /* CONFIG_SMP */
 
-	.text
 ENTRY(stack_start)
 	.long	init_thread_union+8192
 	.long	__KERNEL_DS

trunk/arch/m32r/kernel/vmlinux.lds.S

@@ -27,7 +27,6 @@ SECTIONS
   _text = .;			/* Text and read-only data */
   .boot : { *(.boot) } = 0
   .text : {
-	*(.text.head)
 	TEXT_TEXT
 	SCHED_TEXT
 	LOCK_TEXT

trunk/arch/mips/include/asm/bug.h

@@ -7,31 +7,20 @@
 
 #include <asm/break.h>
 
-static inline void __noreturn BUG(void)
-{
-	__asm__ __volatile__("break %0" : : "i" (BRK_BUG));
-	/* Fool GCC into thinking the function doesn't return. */
-	while (1)
-		;
-}
+#define BUG()								\
+do {									\
+	__asm__ __volatile__("break %0" : : "i" (BRK_BUG));		\
+} while (0)
 
 #define HAVE_ARCH_BUG
 
 #if (_MIPS_ISA > _MIPS_ISA_MIPS1)
 
-static inline void  __BUG_ON(unsigned long condition)
-{
-	if (__builtin_constant_p(condition)) {
-		if (condition)
-			BUG();
-		else
-			return;
-	}
-	__asm__ __volatile__("tne $0, %0, %1"
-			     : : "r" (condition), "i" (BRK_BUG));
-}
-
-#define BUG_ON(C) __BUG_ON((unsigned long)(C))
+#define BUG_ON(condition)						\
+do {									\
+	__asm__ __volatile__("tne $0, %0, %1"				\
+			     : : "r" (condition), "i" (BRK_BUG));	\
+} while (0)
 
 #define HAVE_ARCH_BUG_ON
 

trunk/arch/mips/include/asm/ptrace.h

@@ -9,6 +9,10 @@
 #ifndef _ASM_PTRACE_H
 #define _ASM_PTRACE_H
 
+#ifdef CONFIG_64BIT
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+#endif
+
 /* 0 - 31 are integer registers, 32 - 63 are fp registers.  */
 #define FPR_BASE	32
 #define PC		64

trunk/arch/mn10300/kernel/gdb-stub.c

@@ -522,7 +522,17 @@ static int gdbstub_single_step(struct pt_regs *regs)
 	} else {
 		switch (cur) {
 			/* Bxx (d8,PC) */
-		case 0xc0 ... 0xca:
+		case 0xc0:
+		case 0xc1:
+		case 0xc2:
+		case 0xc3:
+		case 0xc4:
+		case 0xc5:
+		case 0xc6:
+		case 0xc7:
+		case 0xc8:
+		case 0xc9:
+		case 0xca:
 			if (gdbstub_read_byte(pc + 1, (u8 *) &x) < 0)
 				goto fault;
 			if (!__gdbstub_mark_bp(pc + 2, 0))
@@ -533,7 +543,17 @@ static int gdbstub_single_step(struct pt_regs *regs)
 			break;
 
 			/* LXX (d8,PC) */
-		case 0xd0 ... 0xda:
+		case 0xd0:
+		case 0xd1:
+		case 0xd2:
+		case 0xd3:
+		case 0xd4:
+		case 0xd5:
+		case 0xd6:
+		case 0xd7:
+		case 0xd8:
+		case 0xd9:
+		case 0xda:
 			if (!__gdbstub_mark_bp(pc + 1, 0))
 				goto fault;
 			if (regs->pc != regs->lar &&

trunk/arch/parisc/include/asm/ptrace.h

@@ -47,6 +47,8 @@ struct pt_regs {
 
 #define task_regs(task) ((struct pt_regs *) ((char *)(task) + TASK_REGS))
 
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+
 struct task_struct;
 #define arch_has_single_step()	1
 void user_disable_single_step(struct task_struct *task);

trunk/arch/powerpc/include/asm/mmu-hash64.h

@@ -280,6 +280,7 @@ extern int hash_huge_page(struct mm_struct *mm, unsigned long access,
 extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 			     unsigned long pstart, unsigned long prot,
 			     int psize, int ssize);
+extern void set_huge_psize(int psize);
 extern void add_gpage(unsigned long addr, unsigned long page_size,
 			  unsigned long number_of_pages);
 extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr);

trunk/arch/powerpc/include/asm/ptrace.h

@@ -55,6 +55,8 @@ struct pt_regs {
 
 #ifdef __powerpc64__
 
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+
 #define STACK_FRAME_OVERHEAD	112	/* size of minimum stack frame */
 #define STACK_FRAME_LR_SAVE	2	/* Location of LR in stack frame */
 #define STACK_FRAME_REGS_MARKER	ASM_CONST(0x7265677368657265)

trunk/arch/powerpc/mm/hugetlbpage.c

@@ -677,7 +677,7 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access,
 	return err;
 }
 
-static void __init set_huge_psize(int psize)
+void set_huge_psize(int psize)
 {
 	/* Check that it is a page size supported by the hardware and
 	 * that it fits within pagetable limits. */