---

yaml
---
r: 61521
b: refs/heads/master
c: 5e1751f
h: refs/heads/master
i:
  61519: 021de10
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 25343469e77bd6f5694bb6b641a8ea1bd2173782
+refs/heads/master: 5e1751f8396544df3b334afd2e67557757d47fb0

trunk/Documentation/dvb/bt8xx.txt

@@ -9,19 +9,29 @@ for accessing the i2c bus and the gpio pins of the bt8xx chipset.
 Please see Documentation/dvb/cards.txt => o Cards based on the Conexant Bt8xx PCI bridge:
 
 Compiling kernel please enable:
-a.)"Device drivers" => "Multimedia devices" => "Video For Linux" => "BT848 Video For Linux"
-b.)"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices"
- => "DVB for Linux" "DVB Core Support" "Bt8xx based PCI Cards"
+a.)"Device drivers" => "Multimedia devices" => "Video For Linux" => "Enable Video for Linux API 1 (DEPRECATED)"
+b.)"Device drivers" => "Multimedia devices" => "Video For Linux" => "Video Capture Adapters" => "BT848 Video For Linux"
+c.)"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices" => "DVB for Linux" "DVB Core Support" "Bt8xx based PCI Cards"
 
-2) Loading Modules
-==================
+Please use the following options with care as deselection of drivers which are in fact necessary
+may result in DVB devices that cannot be tuned due to lack of driver support:
+You can save RAM by deselecting every frontend module that your DVB card does not need.
+
+First please remove the static dependency of DVB card drivers on all frontend modules for all possible card variants by enabling:
+d.) "Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices"
+ => "DVB for Linux" "DVB Core Support" "Load and attach frontend modules as needed"
 
-In default cases bttv is loaded automatically.
-To load the backend either place dvb-bt8xx in etc/modules, or apply manually:
+If you know the frontend driver that your card needs please enable:
+e.)"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices"
+ => "DVB for Linux" "DVB Core Support" "Customise DVB Frontends" => "Customise the frontend modules to build"
+ Then please select your card-specific frontend module.
 
-	$ modprobe dvb-bt8xx
+2) Loading Modules
+==================
 
-All frontends will be loaded automatically.
+Regular case: If the bttv driver detects a bt8xx-based DVB card, all frontend and backend modules will be loaded automatically.
+Exceptions are:
+- Old TwinHan DST cards or clones with or without CA slot and not containing an Eeprom.
 People running udev please see Documentation/dvb/udev.txt.
 
 In the following cases overriding the PCI type detection for dvb-bt8xx might be necessary:
@@ -30,7 +40,6 @@ In the following cases overriding the PCI type detection for dvb-bt8xx might be
 ------------------------------
 
 	$ modprobe bttv card=113
-	$ modprobe dvb-bt8xx
 	$ modprobe dst
 
 Useful parameters for verbosity level and debugging the dst module:
@@ -65,10 +74,9 @@ DViCO FusionHDTV 5 Lite:	135
 Notice: The order of the card ID should be uprising:
 Example:
 	$ modprobe bttv card=113 card=135
-	$ modprobe dvb-bt8xx
 
 For a full list of card ID's please see Documentation/video4linux/CARDLIST.bttv.
-In case of further problems send questions to the mailing list: www.linuxdvb.org.
+In case of further problems please subscribe and send questions to the mailing list: linux-dvb@linuxtv.org.
 
 Authors: Richard Walker,
 	 Jamie Honan,

trunk/Documentation/dvb/get_dvb_firmware

@@ -24,7 +24,8 @@ use IO::Handle;
 @components = ( "sp8870", "sp887x", "tda10045", "tda10046",
 		"tda10046lifeview", "av7110", "dec2000t", "dec2540t",
 		"dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
-		"or51211", "or51132_qam", "or51132_vsb", "bluebird");
+		"or51211", "or51132_qam", "or51132_vsb", "bluebird",
+		"opera1");
 
 # Check args
 syntax() if (scalar(@ARGV) != 1);
@@ -56,7 +57,7 @@ syntax();
 
 sub sp8870 {
     my $sourcefile = "tt_Premium_217g.zip";
-    my $url = "http://www.technotrend.de/new/217g/$sourcefile";
+    my $url = "http://www.softwarepatch.pl/9999ccd06a4813cb827dbb0005071c71/$sourcefile";
     my $hash = "53970ec17a538945a6d8cb608a7b3899";
     my $outfile = "dvb-fe-sp8870.fw";
     my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
@@ -210,6 +211,45 @@ sub dec3000s {
 
     $outfile;
 }
+sub opera1{
+	my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 0);
+
+	checkstandard();
+	my $fwfile1="dvb-usb-opera1-fpga-01.fw";
+	my $fwfile2="dvb-usb-opera-01.fw";
+	extract("2830SCap2.sys", 0x62e8, 55024, "$tmpdir/opera1-fpga.fw");
+	extract("2830SLoad2.sys",0x3178,0x3685-0x3178,"$tmpdir/fw1part1");
+	extract("2830SLoad2.sys",0x0980,0x3150-0x0980,"$tmpdir/fw1part2");
+	delzero("$tmpdir/fw1part1","$tmpdir/fw1part1-1");
+	delzero("$tmpdir/fw1part2","$tmpdir/fw1part2-1");
+	verify("$tmpdir/fw1part1-1","5e0909858fdf0b5b09ad48b9fe622e70");
+	verify("$tmpdir/fw1part2-1","d6e146f321427e931df2c6fcadac37a1");
+	verify("$tmpdir/opera1-fpga.fw","0f8133f5e9051f5f3c1928f7e5a1b07d");
+
+	my $RES1="\x01\x92\x7f\x00\x01\x00";
+	my $RES0="\x01\x92\x7f\x00\x00\x00";
+	my $DAT1="\x01\x00\xe6\x00\x01\x00";
+	my $DAT0="\x01\x00\xe6\x00\x00\x00";
+	open FW,">$tmpdir/opera.fw";
+	print FW "$RES1";
+	print FW "$DAT1";
+	print FW "$RES1";
+	print FW "$DAT1";
+	appendfile(FW,"$tmpdir/fw1part1-1");
+	print FW "$RES0";
+	print FW "$DAT0";
+	print FW "$RES1";
+	print FW "$DAT1";
+	appendfile(FW,"$tmpdir/fw1part2-1");
+	print FW "$RES1";
+	print FW "$DAT1";
+	print FW "$RES0";
+	print FW "$DAT0";
+	copy ("$tmpdir/opera1-fpga.fw",$fwfile1);
+	copy ("$tmpdir/opera.fw",$fwfile2);
+
+	$fwfile1.",".$fwfile2;
+}
 
 sub vp7041 {
     my $sourcefile = "2.422.zip";
@@ -440,6 +480,25 @@ sub appendfile {
     close(INFILE);
 }
 
+sub delzero{
+	my ($infile,$outfile) =@_;
+
+	open INFILE,"<$infile";
+	open OUTFILE,">$outfile";
+	while (1){
+		$rcount=sysread(INFILE,$buf,22);
+		$len=ord(substr($buf,0,1));
+		print OUTFILE substr($buf,0,1);
+		print OUTFILE substr($buf,2,$len+3);
+	last if ($rcount<1);
+	printf OUTFILE "%c",0;
+#print $len." ".length($buf)."\n";
+
+	}
+	close(INFILE);
+	close(OUTFILE);
+}
+
 sub syntax() {
     print STDERR "syntax: get_dvb_firmware <component>\n";
     print STDERR "Supported components:\n";

trunk/Documentation/dvb/opera-firmware.txt

@@ -0,0 +1,27 @@
+To extract the firmware for the Opera DVB-S1 USB-Box
+you need to copy the files:
+
+2830SCap2.sys
+2830SLoad2.sys
+
+from the windriver disk into this directory.
+
+Then run
+
+./get_dvb_firware opera1
+
+and after that you have 2 files:
+
+dvb-usb-opera-01.fw
+dvb-usb-opera1-fpga-01.fw
+
+in here.
+
+Copy them into /lib/firmware/ .
+
+After that the driver can load the firmware
+(if you have enabled firmware loading
+in kernel config and have hotplug running).
+
+
+Marco Gittler <g.marco@freenet.de>

trunk/Documentation/powerpc/booting-without-of.txt

@@ -1250,6 +1250,12 @@ platforms are moved over to use the flattened-device-tree model.
       network device.  This is used by the bootwrapper to interpret
       MAC addresses passed by the firmware when no information other
       than indices is available to associate an address with a device.
+    - phy-connection-type : a string naming the controller/PHY interface type,
+      i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "sgmii",
+      "tbi", or "rtbi".  This property is only really needed if the connection
+      is of type "rgmii-id", as all other connection types are detected by
+      hardware.
+
 
   Example:
 

trunk/Documentation/video4linux/CARDLIST.bttv

@@ -66,7 +66,7 @@
  65 -> Lifeview FlyVideo 2000S LR90
  66 -> Terratec TValueRadio                                [153b:1135,153b:ff3b]
  67 -> IODATA GV-BCTV4/PCI                                 [10fc:4050]
- 68 -> 3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)         [121a:3000,10b4:2637]
+ 68 -> 3Dfx VoodooTV FM (Euro)                             [10b4:2637]
  69 -> Active Imaging AIMMS
  70 -> Prolink Pixelview PV-BT878P+ (Rev.4C,8E)
  71 -> Lifeview FlyVideo 98EZ (capture only) LR51          [1851:1851]
@@ -145,3 +145,5 @@
 144 -> MagicTV
 145 -> SSAI Security Video Interface                       [4149:5353]
 146 -> SSAI Ultrasound Video Interface                     [414a:5353]
+147 -> VoodooTV 200 (USA)                                  [121a:3000]
+148 -> DViCO FusionHDTV 2                                  [dbc0:d200]

trunk/Documentation/video4linux/CARDLIST.cx88

@@ -55,3 +55,4 @@
  54 -> Norwood Micro TV Tuner
  55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM  [c180:c980]
  56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder   [0070:9600,0070:9601,0070:9602]
+ 57 -> ADS Tech Instant Video PCI                          [1421:0390]

trunk/Documentation/video4linux/CARDLIST.saa7134

@@ -114,3 +114,4 @@
 113 -> Elitegroup ECS TVP3XP FM1246 Tuner Card (PAL,FM) [1019:4cb6]
 114 -> KWorld DVB-T 210                         [17de:7250]
 115 -> Sabrent PCMCIA TV-PCB05                  [0919:2003]
+116 -> 10MOONS TM300 TV Card                    [1131:2304]

trunk/Documentation/video4linux/CARDLIST.tuner

@@ -40,7 +40,7 @@ tuner=38 - Philips PAL/SECAM multi (FM1216ME MK3)
 tuner=39 - LG NTSC (newer TAPC series)
 tuner=40 - HITACHI V7-J180AT
 tuner=41 - Philips PAL_MK (FI1216 MK)
-tuner=42 - Philips 1236D ATSC/NTSC dual in
+tuner=42 - Philips FCV1236D ATSC/NTSC dual in
 tuner=43 - Philips NTSC MK3 (FM1236MK3 or FM1236/F)
 tuner=44 - Philips 4 in 1 (ATI TV Wonder Pro/Conexant)
 tuner=45 - Microtune 4049 FM5
@@ -72,3 +72,4 @@ tuner=70 - Samsung TCPN 2121P30A
 tuner=71 - Xceive xc3028
 tuner=72 - Thomson FE6600
 tuner=73 - Samsung TCPG 6121P30A
+tuner=75 - Philips TEA5761 FM Radio

trunk/Documentation/video4linux/sn9c102.txt

@@ -436,7 +436,7 @@ HV7131D    Hynix Semiconductor     | Yes         No       No       No
 HV7131R    Hynix Semiconductor     | No          Yes      Yes      Yes
 MI-0343    Micron Technology       | Yes         No       No       No
 MI-0360    Micron Technology       | No          Yes      Yes      Yes
-OV7630     OmniVision Technologies | Yes         Yes      No       No
+OV7630     OmniVision Technologies | Yes         Yes      Yes      Yes
 OV7660     OmniVision Technologies | No          No       Yes      Yes
 PAS106B    PixArt Imaging          | Yes         No       No       No
 PAS202B    PixArt Imaging          | Yes         Yes      No       No
@@ -583,6 +583,7 @@ order):
 - Bertrik Sikken, who reverse-engineered and documented the Huffman compression
   algorithm used in the SN9C101, SN9C102 and SN9C103 controllers and
   implemented the first decoder;
+- Ronny Standke for the donation of a webcam;
 - Mizuno Takafumi for the donation of a webcam;
 - an "anonymous" donator (who didn't want his name to be revealed) for the
   donation of a webcam.

trunk/Documentation/video4linux/zr364xx.txt

@@ -62,4 +62,4 @@ Vendor  Product  Distributor     Model
 0x0784  0x0040   Traveler        Slimline X5
 0x06d6  0x0034   Trust           Powerc@m 750
 0x0a17  0x0062   Pentax          Optio 50L
-
+0x06d6  0x003b   Trust           Powerc@m 970Z

trunk/MAINTAINERS

@@ -913,6 +913,12 @@ M:	mchan@broadcom.com
 L:	netdev@vger.kernel.org
 S:	Supported
 
+BSG (block layer generic sg v4 driver)
+P:	FUJITA Tomonori
+M:	fujita.tomonori@lab.ntt.co.jp
+L:	linux-scsi@vger.kernel.org
+S:	Supported
+
 BTTV VIDEO4LINUX DRIVER
 P:	Mauro Carvalho Chehab
 M:	mchehab@infradead.org
@@ -1734,6 +1740,7 @@ S:	Maintained
 i386 SETUP CODE / CPU ERRATA WORKAROUNDS
 P:	H. Peter Anvin
 M:	hpa@zytor.com
+T:	git.kernel.org:/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup.git
 S:	Maintained
 
 IA64 (Itanium) PLATFORM
@@ -2387,7 +2394,7 @@ P:	Artem Bityutskiy
 M:	dedekind@infradead.org
 W:	http://www.linux-mtd.infradead.org/
 L:	linux-mtd@lists.infradead.org
-T:	git git://git.infradead.org/ubi-2.6.git
+T:	git git://git.infradead.org/~dedekind/ubi-2.6.git
 S:	Maintained
 
 MICROTEK X6 SCANNER
@@ -4104,6 +4111,11 @@ W:	http://www.polyware.nl/~middelin/En/hobbies.html
 W:	http://www.polyware.nl/~middelin/hobbies.html
 S:	Maintained
 
+ZS DECSTATION Z85C30 SERIAL DRIVER
+P:	Maciej W. Rozycki
+M:	macro@linux-mips.org
+S:	Maintained
+
 THE REST
 P:	Linus Torvalds
 S:	Buried alive in reporters

trunk/arch/alpha/kernel/smp.c

@@ -65,7 +65,7 @@ enum ipi_message_type {
 };
 
 /* Set to a secondary's cpuid when it comes online.  */
-static int smp_secondary_alive __initdata = 0;
+static int smp_secondary_alive __devinitdata = 0;
 
 /* Which cpus ids came online.  */
 cpumask_t cpu_online_map;
@@ -173,7 +173,7 @@ smp_callin(void)
 }
 
 /* Wait until hwrpb->txrdy is clear for cpu.  Return -1 on timeout.  */
-static int __init
+static int __devinit
 wait_for_txrdy (unsigned long cpumask)
 {
 	unsigned long timeout;
@@ -358,7 +358,7 @@ secondary_cpu_start(int cpuid, struct task_struct *idle)
 /*
  * Bring one cpu online.
  */
-static int __init
+static int __devinit
 smp_boot_one_cpu(int cpuid)
 {
 	struct task_struct *idle;

trunk/arch/alpha/lib/checksum.c

@@ -69,6 +69,7 @@ __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
 	result = (result & 0xffffffff) + (result >> 32);
 	return (__force __wsum)result;
 }
+EXPORT_SYMBOL(csum_tcpudp_nofold);
 
 /*
  * Do a 64-bit checksum on an arbitrary memory area..

trunk/arch/avr32/Kconfig

@@ -113,6 +113,10 @@ config BOARD_ATNGW100
 	bool "ATNGW100 Network Gateway"
 endchoice
 
+if BOARD_ATSTK1000
+source "arch/avr32/boards/atstk1000/Kconfig"
+endif
+
 choice
 	prompt "Boot loader type"
 	default LOADER_U_BOOT
@@ -185,6 +189,27 @@ config CMDLINE
 
 endmenu
 
+menu "Power managment options"
+
+menu "CPU Frequency scaling"
+
+source "drivers/cpufreq/Kconfig"
+
+config CPU_FREQ_AT32AP
+	bool "CPU frequency driver for AT32AP"
+	depends on CPU_FREQ && PLATFORM_AT32AP
+	default n
+	help
+	  This enables the CPU frequency driver for AT32AP processors.
+
+	  For details, take a look in <file:Documentation/cpu-freq>.
+
+	  If in doubt, say N.
+
+endmenu
+
+endmenu
+
 menu "Bus options"
 
 config PCI