Merge tag 'iio-for-3.9c' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/jic23/iio into staging-next

Jonathan writes:

"Third set of IIO new drivers, cleanups and fixes for the 3.9 cycle

New drivers
1) A driver for ST microelectronics sensors.  This driver already covers
   a large set of new parts (20 gyros, accelerometer and magnetometers)
   not currently covered by the existing drivers.  The intent moving forward
   is to merge this with the other drivers for similar parts already in tree.
   The lis3l02dq driver currently in staging/iio will be trivial, the lis3
   driver in misc more complex as it has a number of additional interfaces.
   Any merging in of the lis3 driver will rely on the not currently
   merged iio_input bridge driver and handling of freefall notifications
   etc.

2) A driver for the itg3200 gyroscope.

Graduations from staging
1) Cleanup and move out of staging of the adxrs450 gyroscope driver.  The
   cleanup required was all minor but there were a couple of fixes hidden in
   there.

Core and driver additions
1) Initial work from Guenter Roeck on device tree support for IIO's provider/
   consumer code. Focuses on the iio_hwmon driver and the max1363 adc driver.
   The full device tree syntax is currently under discussion but should
   follow shortly.

Cleanups and fixes
1) Remove a noop function __iio_update_buffer
2) Couple of small fixes and cleanups for the max1363
"

drivers/iio/accel/Kconfig

@@ -21,4 +21,35 @@ config KXSD9
 	  Say yes here to build support for the Kionix KXSD9 accelerometer.
 	  Currently this only supports the device via an SPI interface.
 
+config IIO_ST_ACCEL_3AXIS
+	tristate "STMicroelectronics accelerometers 3-Axis Driver"
+	depends on (I2C || SPI_MASTER) && SYSFS
+	select IIO_ST_SENSORS_CORE
+	select IIO_ST_ACCEL_I2C_3AXIS if (I2C)
+	select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER)
+	select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
+	select IIO_ST_ACCEL_BUFFER if (IIO_TRIGGERED_BUFFER)
+	help
+	  Say yes here to build support for STMicroelectronics accelerometers:
+	  LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
+	  LIS331DLH, LSM303DL, LSM303DLM, LSM330.
+
+	  This driver can also be built as a module. If so, will be created
+	  these modules:
+	  - st_accel (core functions for the driver [it is mandatory]);
+	  - st_accel_i2c (necessary for the I2C devices [optional*]);
+	  - st_accel_spi (necessary for the SPI devices [optional*]);
+
+	  (*) one of these is necessary to do something.
+
+config IIO_ST_ACCEL_I2C_3AXIS
+	tristate
+	depends on IIO_ST_ACCEL_3AXIS
+	depends on IIO_ST_SENSORS_I2C
+
+config IIO_ST_ACCEL_SPI_3AXIS
+	tristate
+	depends on IIO_ST_ACCEL_3AXIS
+	depends on IIO_ST_SENSORS_SPI
+
 endmenu

drivers/iio/accel/Makefile

@@ -3,4 +3,12 @@
 #
 
 obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
+
+obj-$(CONFIG_IIO_ST_ACCEL_3AXIS) += st_accel.o
+st_accel-y := st_accel_core.o
+st_accel-$(CONFIG_IIO_BUFFER) += st_accel_buffer.o
+
+obj-$(CONFIG_IIO_ST_ACCEL_I2C_3AXIS) += st_accel_i2c.o
+obj-$(CONFIG_IIO_ST_ACCEL_SPI_3AXIS) += st_accel_spi.o
+
 obj-$(CONFIG_KXSD9)	+= kxsd9.o

drivers/iio/accel/st_accel.h

@@ -0,0 +1,47 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ * v. 1.0.0
+ * Licensed under the GPL-2.
+ */
+
+#ifndef ST_ACCEL_H
+#define ST_ACCEL_H
+
+#include <linux/types.h>
+#include <linux/iio/common/st_sensors.h>
+
+#define LSM303DLHC_ACCEL_DEV_NAME	"lsm303dlhc_accel"
+#define LIS3DH_ACCEL_DEV_NAME		"lis3dh"
+#define LSM330D_ACCEL_DEV_NAME		"lsm330d_accel"
+#define LSM330DL_ACCEL_DEV_NAME		"lsm330dl_accel"
+#define LSM330DLC_ACCEL_DEV_NAME	"lsm330dlc_accel"
+#define LIS331DLH_ACCEL_DEV_NAME	"lis331dlh"
+#define LSM303DL_ACCEL_DEV_NAME		"lsm303dl_accel"
+#define LSM303DLH_ACCEL_DEV_NAME	"lsm303dlh_accel"
+#define LSM303DLM_ACCEL_DEV_NAME	"lsm303dlm_accel"
+#define LSM330_ACCEL_DEV_NAME		"lsm330_accel"
+
+int st_accel_common_probe(struct iio_dev *indio_dev);
+void st_accel_common_remove(struct iio_dev *indio_dev);
+
+#ifdef CONFIG_IIO_BUFFER
+int st_accel_allocate_ring(struct iio_dev *indio_dev);
+void st_accel_deallocate_ring(struct iio_dev *indio_dev);
+int st_accel_trig_set_state(struct iio_trigger *trig, bool state);
+#define ST_ACCEL_TRIGGER_SET_STATE (&st_accel_trig_set_state)
+#else /* CONFIG_IIO_BUFFER */
+static inline int st_accel_allocate_ring(struct iio_dev *indio_dev)
+{
+	return 0;
+}
+static inline void st_accel_deallocate_ring(struct iio_dev *indio_dev)
+{
+}
+#define ST_ACCEL_TRIGGER_SET_STATE NULL
+#endif /* CONFIG_IIO_BUFFER */
+
+#endif /* ST_ACCEL_H */

drivers/iio/accel/st_accel_buffer.c

@@ -0,0 +1,114 @@
+/*
+ * STMicroelectronics accelerometers driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include "st_accel.h"
+
+int st_accel_trig_set_state(struct iio_trigger *trig, bool state)
+{
+	struct iio_dev *indio_dev = trig->private_data;
+
+	return st_sensors_set_dataready_irq(indio_dev, state);
+}
+
+static int st_accel_buffer_preenable(struct iio_dev *indio_dev)
+{
+	int err;
+
+	err = st_sensors_set_enable(indio_dev, true);
+	if (err < 0)
+		goto st_accel_set_enable_error;
+
+	err = iio_sw_buffer_preenable(indio_dev);
+
+st_accel_set_enable_error:
+	return err;
+}
+
+static int st_accel_buffer_postenable(struct iio_dev *indio_dev)
+{
+	int err;
+	struct st_sensor_data *adata = iio_priv(indio_dev);
+
+	adata->buffer_data = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+	if (adata->buffer_data == NULL) {
+		err = -ENOMEM;
+		goto allocate_memory_error;
+	}
+
+	err = st_sensors_set_axis_enable(indio_dev,
+					(u8)indio_dev->active_scan_mask[0]);
+	if (err < 0)
+		goto st_accel_buffer_postenable_error;
+
+	err = iio_triggered_buffer_postenable(indio_dev);
+	if (err < 0)
+		goto st_accel_buffer_postenable_error;
+
+	return err;
+
+st_accel_buffer_postenable_error:
+	kfree(adata->buffer_data);
+allocate_memory_error:
+	return err;
+}
+
+static int st_accel_buffer_predisable(struct iio_dev *indio_dev)
+{
+	int err;
+	struct st_sensor_data *adata = iio_priv(indio_dev);
+
+	err = iio_triggered_buffer_predisable(indio_dev);
+	if (err < 0)
+		goto st_accel_buffer_predisable_error;
+
+	err = st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS);
+	if (err < 0)
+		goto st_accel_buffer_predisable_error;
+
+	err = st_sensors_set_enable(indio_dev, false);
+
+st_accel_buffer_predisable_error:
+	kfree(adata->buffer_data);
+	return err;
+}
+
+static const struct iio_buffer_setup_ops st_accel_buffer_setup_ops = {
+	.preenable = &st_accel_buffer_preenable,
+	.postenable = &st_accel_buffer_postenable,
+	.predisable = &st_accel_buffer_predisable,
+};
+
+int st_accel_allocate_ring(struct iio_dev *indio_dev)
+{
+	return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+		&st_sensors_trigger_handler, &st_accel_buffer_setup_ops);
+}
+
+void st_accel_deallocate_ring(struct iio_dev *indio_dev)
+{
+	iio_triggered_buffer_cleanup(indio_dev);
+}
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics accelerometers buffer");
+MODULE_LICENSE("GPL v2");