---

yaml
---
r: 167550
b: refs/heads/master
c: 417c523
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: c49de94a56f02768fa881cd7cbf58907910ceb8e
+refs/heads/master: 417c5233dbe35ffd6fa9e53754773f73690e1ce3

trunk/MAINTAINERS

@@ -3630,6 +3630,7 @@ NETWORKING [GENERAL]
 M:	"David S. Miller" <davem@davemloft.net>
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net
+W:	http://patchwork.ozlabs.org/project/netdev/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
 S:	Maintained
 F:	net/
@@ -5611,6 +5612,13 @@ S:	Maintained
 F:	drivers/vlynq/vlynq.c
 F:	include/linux/vlynq.h
 
+VMWARE VMXNET3 ETHERNET DRIVER
+M:     Shreyas Bhatewara <sbhatewara@vmware.com>
+M:     VMware, Inc. <pv-drivers@vmware.com>
+L:     netdev@vger.kernel.org
+S:     Maintained
+F:     drivers/net/vmxnet3/
+
 VOLTAGE AND CURRENT REGULATOR FRAMEWORK
 M:	Liam Girdwood <lrg@slimlogic.co.uk>
 M:	Mark Brown <broonie@opensource.wolfsonmicro.com>

trunk/drivers/net/Kconfig

@@ -3230,4 +3230,12 @@ config VIRTIO_NET
 	  This is the virtual network driver for virtio.  It can be used with
           lguest or QEMU based VMMs (like KVM or Xen).  Say Y or M.
 
+config VMXNET3
+       tristate "VMware VMXNET3 ethernet driver"
+       depends on PCI && X86
+       help
+         This driver supports VMware's vmxnet3 virtual ethernet NIC.
+         To compile this driver as a module, choose M here: the
+         module will be called vmxnet3.
+
 endif # NETDEVICES

trunk/drivers/net/Makefile

@@ -30,6 +30,7 @@ obj-$(CONFIG_TEHUTI) += tehuti.o
 obj-$(CONFIG_ENIC) += enic/
 obj-$(CONFIG_JME) += jme.o
 obj-$(CONFIG_BE2NET) += benet/
+obj-$(CONFIG_VMXNET3) += vmxnet3/
 
 gianfar_driver-objs := gianfar.o \
 		gianfar_ethtool.o \

trunk/drivers/net/acenic.c

@@ -1209,7 +1209,8 @@ static int __devinit ace_init(struct net_device *dev)
 	memset(ap->info, 0, sizeof(struct ace_info));
 	memset(ap->skb, 0, sizeof(struct ace_skb));
 
-	if (ace_load_firmware(dev))
+	ecode = ace_load_firmware(dev);
+	if (ecode)
 		goto init_error;
 
 	ap->fw_running = 0;

trunk/drivers/net/ethoc.c

@@ -663,7 +663,8 @@ static int ethoc_open(struct net_device *dev)
 		return ret;
 
 	/* calculate the number of TX/RX buffers, maximum 128 supported */
-	num_bd = min(128, (dev->mem_end - dev->mem_start + 1) / ETHOC_BUFSIZ);
+	num_bd = min_t(unsigned int,
+		128, (dev->mem_end - dev->mem_start + 1) / ETHOC_BUFSIZ);
 	priv->num_tx = max(min_tx, num_bd / 4);
 	priv->num_rx = num_bd - priv->num_tx;
 	ethoc_write(priv, TX_BD_NUM, priv->num_tx);

trunk/drivers/net/irda/sa1100_ir.c

@@ -232,8 +232,11 @@ static int sa1100_irda_startup(struct sa1100_irda *si)
 	/*
 	 * Ensure that the ports for this device are setup correctly.
 	 */
-	if (si->pdata->startup)
-		si->pdata->startup(si->dev);
+	if (si->pdata->startup)	{
+		ret = si->pdata->startup(si->dev);
+		if (ret)
+			return ret;
+	}
 
 	/*
 	 * Configure PPC for IRDA - we want to drive TXD2 low.

trunk/drivers/net/ixp2000/enp2611.c

@@ -119,24 +119,9 @@ static struct ixp2400_msf_parameters enp2611_msf_parameters =
 	}
 };
 
-struct enp2611_ixpdev_priv
-{
-	struct ixpdev_priv		ixpdev_priv;
-	struct net_device_stats		stats;
-};
-
 static struct net_device *nds[3];
 static struct timer_list link_check_timer;
 
-static struct net_device_stats *enp2611_get_stats(struct net_device *dev)
-{
-	struct enp2611_ixpdev_priv *ip = netdev_priv(dev);
-
-	pm3386_get_stats(ip->ixpdev_priv.channel, &(ip->stats));
-
-	return &(ip->stats);
-}
-
 /* @@@ Poll the SFP moddef0 line too.  */
 /* @@@ Try to use the pm3386 DOOL interrupt as well.  */
 static void enp2611_check_link_status(unsigned long __dummy)
@@ -203,14 +188,13 @@ static int __init enp2611_init_module(void)
 
 	ports = pm3386_port_count();
 	for (i = 0; i < ports; i++) {
-		nds[i] = ixpdev_alloc(i, sizeof(struct enp2611_ixpdev_priv));
+		nds[i] = ixpdev_alloc(i, sizeof(struct ixpdev_priv));
 		if (nds[i] == NULL) {
 			while (--i >= 0)
 				free_netdev(nds[i]);
 			return -ENOMEM;
 		}
 
-		nds[i]->get_stats = enp2611_get_stats;
 		pm3386_init_port(i);
 		pm3386_get_mac(i, nds[i]->dev_addr);
 	}

trunk/drivers/net/ixp2000/ixpdev.c

@@ -21,6 +21,7 @@
 #include "ixp2400_tx.ucode"
 #include "ixpdev_priv.h"
 #include "ixpdev.h"
+#include "pm3386.h"
 
 #define DRV_MODULE_VERSION	"0.2"
 
@@ -271,13 +272,23 @@ static int ixpdev_close(struct net_device *dev)
 	return 0;
 }
 
+static struct net_device_stats *ixpdev_get_stats(struct net_device *dev)
+{
+	struct ixpdev_priv *ip = netdev_priv(dev);
+
+	pm3386_get_stats(ip->channel, &(dev->stats));
+
+	return &(dev->stats);
+}
+
 static const struct net_device_ops ixpdev_netdev_ops = {
 	.ndo_open		= ixpdev_open,
 	.ndo_stop		= ixpdev_close,
 	.ndo_start_xmit		= ixpdev_xmit,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_get_stats		= ixpdev_get_stats,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= ixpdev_poll_controller,
 #endif

trunk/drivers/net/netxen/netxen_nic_main.c

@@ -595,7 +595,8 @@ netxen_setup_pci_map(struct netxen_adapter *adapter)
 	void __iomem *mem_ptr2 = NULL;
 	void __iomem *db_ptr = NULL;
 
-	unsigned long mem_base, mem_len, db_base, db_len = 0, pci_len0 = 0;
+	resource_size_t mem_base, db_base;
+	unsigned long mem_len, db_len = 0, pci_len0 = 0;
 
 	struct pci_dev *pdev = adapter->pdev;
 	int pci_func = adapter->ahw.pci_func;

trunk/drivers/net/pcmcia/3c574_cs.c

@@ -251,6 +251,7 @@ static void el3_tx_timeout(struct net_device *dev);
 static int el3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
 static const struct ethtool_ops netdev_ethtool_ops;
 static void set_rx_mode(struct net_device *dev);
+static void set_multicast_list(struct net_device *dev);
 
 static void tc574_detach(struct pcmcia_device *p_dev);
 
@@ -266,7 +267,7 @@ static const struct net_device_ops el3_netdev_ops = {
 	.ndo_tx_timeout 	= el3_tx_timeout,
 	.ndo_get_stats		= el3_get_stats,
 	.ndo_do_ioctl		= el3_ioctl,
-	.ndo_set_multicast_list = set_rx_mode,
+	.ndo_set_multicast_list = set_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
@@ -1161,6 +1162,16 @@ static void set_rx_mode(struct net_device *dev)
 		outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD);
 }
 
+static void set_multicast_list(struct net_device *dev)
+{
+	struct el3_private *lp = netdev_priv(dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&lp->window_lock, flags);
+	set_rx_mode(dev);
+	spin_unlock_irqrestore(&lp->window_lock, flags);
+}
+
 static int el3_close(struct net_device *dev)
 {
 	unsigned int ioaddr = dev->base_addr;

trunk/drivers/net/usb/pegasus.c

@@ -62,17 +62,30 @@ static char *devid=NULL;
 static struct usb_eth_dev usb_dev_id[] = {
 #define	PEGASUS_DEV(pn, vid, pid, flags)	\
 	{.name = pn, .vendor = vid, .device = pid, .private = flags},
+#define PEGASUS_DEV_CLASS(pn, vid, pid, dclass, flags) \
+	PEGASUS_DEV(pn, vid, pid, flags)
 #include "pegasus.h"
 #undef	PEGASUS_DEV
+#undef	PEGASUS_DEV_CLASS
 	{NULL, 0, 0, 0},
 	{NULL, 0, 0, 0}
 };
 
 static struct usb_device_id pegasus_ids[] = {
 #define	PEGASUS_DEV(pn, vid, pid, flags) \
 	{.match_flags = USB_DEVICE_ID_MATCH_DEVICE, .idVendor = vid, .idProduct = pid},
+/*
+ * The Belkin F8T012xx1 bluetooth adaptor has the same vendor and product
+ * IDs as the Belkin F5D5050, so we need to teach the pegasus driver to
+ * ignore adaptors belonging to the "Wireless" class 0xE0. For this one
+ * case anyway, seeing as the pegasus is for "Wired" adaptors.
+ */
+#define PEGASUS_DEV_CLASS(pn, vid, pid, dclass, flags) \
+	{.match_flags = (USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_CLASS), \
+	.idVendor = vid, .idProduct = pid, .bDeviceClass = dclass},
 #include "pegasus.h"
 #undef	PEGASUS_DEV
+#undef	PEGASUS_DEV_CLASS
 	{},
 	{}
 };

trunk/drivers/net/usb/pegasus.h

@@ -202,7 +202,11 @@ PEGASUS_DEV( "AEI USB Fast Ethernet Adapter", VENDOR_AEILAB, 0x1701,
 		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "Allied Telesyn Int. AT-USB100", VENDOR_ALLIEDTEL, 0xb100,
 		DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121,
+/*
+ * Distinguish between this Belkin adaptor and the Belkin bluetooth adaptors
+ * with the same product IDs by checking the device class too.
+ */
+PEGASUS_DEV_CLASS( "Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121, 0x00,
 		DEFAULT_GPIO_RESET | PEGASUS_II )
 PEGASUS_DEV( "Billionton USB-100", VENDOR_BILLIONTON, 0x0986,
 		DEFAULT_GPIO_RESET )

trunk/drivers/net/vmxnet3/Makefile

@@ -0,0 +1,35 @@
+################################################################################
+#
+# Linux driver for VMware's vmxnet3 ethernet NIC.
+#
+# Copyright (C) 2007-2009, VMware, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License and no later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+# NON INFRINGEMENT.  See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# The full GNU General Public License is included in this distribution in
+# the file called "COPYING".
+#
+# Maintained by: Shreyas Bhatewara <pv-drivers@vmware.com>
+#
+#
+################################################################################
+
+#
+# Makefile for the VMware vmxnet3 ethernet NIC driver
+#
+
+obj-$(CONFIG_VMXNET3) += vmxnet3.o
+
+vmxnet3-objs := vmxnet3_drv.o vmxnet3_ethtool.o

trunk/drivers/net/vmxnet3/upt1_defs.h

@@ -0,0 +1,96 @@
+/*
+ * Linux driver for VMware's vmxnet3 ethernet NIC.
+ *
+ * Copyright (C) 2008-2009, VMware, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License and no later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Maintained by: Shreyas Bhatewara <pv-drivers@vmware.com>
+ *
+ */
+
+#ifndef _UPT1_DEFS_H
+#define _UPT1_DEFS_H
+
+struct UPT1_TxStats {
+	u64			TSOPktsTxOK;  /* TSO pkts post-segmentation */
+	u64			TSOBytesTxOK;
+	u64			ucastPktsTxOK;
+	u64			ucastBytesTxOK;
+	u64			mcastPktsTxOK;
+	u64			mcastBytesTxOK;
+	u64			bcastPktsTxOK;
+	u64			bcastBytesTxOK;
+	u64			pktsTxError;
+	u64			pktsTxDiscard;
+};
+
+struct UPT1_RxStats {
+	u64			LROPktsRxOK;    /* LRO pkts */
+	u64			LROBytesRxOK;   /* bytes from LRO pkts */
+	/* the following counters are for pkts from the wire, i.e., pre-LRO */
+	u64			ucastPktsRxOK;
+	u64			ucastBytesRxOK;
+	u64			mcastPktsRxOK;
+	u64			mcastBytesRxOK;
+	u64			bcastPktsRxOK;
+	u64			bcastBytesRxOK;
+	u64			pktsRxOutOfBuf;
+	u64			pktsRxError;
+};
+
+/* interrupt moderation level */
+enum {
+	UPT1_IML_NONE		= 0, /* no interrupt moderation */
+	UPT1_IML_HIGHEST	= 7, /* least intr generated */
+	UPT1_IML_ADAPTIVE	= 8, /* adpative intr moderation */
+};
+/* values for UPT1_RSSConf.hashFunc */
+enum {
+	UPT1_RSS_HASH_TYPE_NONE      = 0x0,
+	UPT1_RSS_HASH_TYPE_IPV4      = 0x01,
+	UPT1_RSS_HASH_TYPE_TCP_IPV4  = 0x02,
+	UPT1_RSS_HASH_TYPE_IPV6      = 0x04,
+	UPT1_RSS_HASH_TYPE_TCP_IPV6  = 0x08,
+};
+
+enum {
+	UPT1_RSS_HASH_FUNC_NONE      = 0x0,
+	UPT1_RSS_HASH_FUNC_TOEPLITZ  = 0x01,
+};
+
+#define UPT1_RSS_MAX_KEY_SIZE        40
+#define UPT1_RSS_MAX_IND_TABLE_SIZE  128
+
+struct UPT1_RSSConf {
+	u16			hashType;
+	u16			hashFunc;
+	u16			hashKeySize;
+	u16			indTableSize;
+	u8			hashKey[UPT1_RSS_MAX_KEY_SIZE];
+	u8			indTable[UPT1_RSS_MAX_IND_TABLE_SIZE];
+};
+
+/* features */
+enum {
+	UPT1_F_RXCSUM		= 0x0001,   /* rx csum verification */
+	UPT1_F_RSS		= 0x0002,
+	UPT1_F_RXVLAN		= 0x0004,   /* VLAN tag stripping */
+	UPT1_F_LRO		= 0x0008,
+};
+#endif