Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6

* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: (53 commits)
  hwmon: (vt8231) fix sparse warning
  hwmon: (sis5595) fix sparse warning
  hwmon: (w83627hf) don't assume bank 0
  hwmon: (w83627hf) Fix setting fan min right after driver load
  hwmon: (w83627hf) De-macro sysfs callback functions
  hwmon: Add new combined driver for FSC chips
  hwmon: (ibmpex) Release IPMI user if hwmon registration fails
  hwmon: (dme1737) Add sch311x support
  hwmon: (dme1737) group functions logically
  hwmon: (dme1737) cleanups
  hwmon: IBM power meter driver
  hwmon: (coretemp) Add support for Celeron 4xx
  hwmon: (lm87) Disable VID when it should be
  hwmon: (w83781d) Add individual alarm and beep files
  hwmon: VRM is not read from registers
  MAINTAINERS: update hwmon subsystem git trees
  hwmon: Fix the code examples in documentation
  hwmon: update sysfs interface document - error handling
  hwmon: (thmc50) Fix a debug message
  hwmon: (thmc50) Don't create temp3 if not enabled
  ...

Documentation/hwmon/coretemp

@@ -4,7 +4,7 @@ Kernel driver coretemp
 Supported chips:
   * All Intel Core family
     Prefix: 'coretemp'
-    CPUID: family 0x6, models 0xe, 0xf
+    CPUID: family 0x6, models 0xe, 0xf, 0x16
     Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual
                Volume 3A: System Programming Guide
 

Documentation/hwmon/dme1737

@@ -6,6 +6,10 @@ Supported chips:
     Prefix: 'dme1737'
     Addresses scanned: I2C 0x2c, 0x2d, 0x2e
     Datasheet: Provided by SMSC upon request and under NDA
+  * SMSC SCH3112, SCH3114, SCH3116
+    Prefix: 'sch311x'
+    Addresses scanned: none, address read from Super-I/O config space
+    Datasheet: http://www.nuhorizons.com/FeaturedProducts/Volume1/SMSC/311x.pdf
 
 Authors:
     Juerg Haefliger <juergh@gmail.com>
@@ -27,16 +31,25 @@ Description
 -----------
 
 This driver implements support for the hardware monitoring capabilities of the
-SMSC DME1737 and Asus A8000 (which are the same) Super-I/O chips. This chip
-features monitoring of 3 temp sensors temp[1-3] (2 remote diodes and 1
-internal), 7 voltages in[0-6] (6 external and 1 internal) and 6 fan speeds
-fan[1-6]. Additionally, the chip implements 5 PWM outputs pwm[1-3,5-6] for
-controlling fan speeds both manually and automatically.
-
-Fan[3-6] and pwm[3,5-6] are optional features and their availability is
-dependent on the configuration of the chip. The driver will detect which
-features are present during initialization and create the sysfs attributes
-accordingly.
+SMSC DME1737 and Asus A8000 (which are the same) and SMSC SCH311x Super-I/O
+chips. These chips feature monitoring of 3 temp sensors temp[1-3] (2 remote
+diodes and 1 internal), 7 voltages in[0-6] (6 external and 1 internal) and up
+to 6 fan speeds fan[1-6]. Additionally, the chips implement up to 5 PWM
+outputs pwm[1-3,5-6] for controlling fan speeds both manually and
+automatically.
+
+For the DME1737 and A8000, fan[1-2] and pwm[1-2] are always present. Fan[3-6]
+and pwm[3,5-6] are optional features and their availability depends on the
+configuration of the chip. The driver will detect which features are present
+during initialization and create the sysfs attributes accordingly.
+
+For the SCH311x, fan[1-3] and pwm[1-3] are always present and fan[4-6] and
+pwm[5-6] don't exist.
+
+The hardware monitoring features of the DME1737 and A8000 are only accessible
+via SMBus, while the SCH311x only provides access via the ISA bus. The driver
+will therefore register itself as an I2C client driver if it detects a DME1737
+or A8000 and as a platform driver if it detects a SCH311x chip.
 
 
 Voltage Monitoring

Documentation/hwmon/f71805f

@@ -6,6 +6,10 @@ Supported chips:
     Prefix: 'f71805f'
     Addresses scanned: none, address read from Super I/O config space
     Datasheet: Available from the Fintek website
+  * Fintek F71806F/FG
+    Prefix: 'f71872f'
+    Addresses scanned: none, address read from Super I/O config space
+    Datasheet: Available from the Fintek website
   * Fintek F71872F/FG
     Prefix: 'f71872f'
     Addresses scanned: none, address read from Super I/O config space
@@ -38,6 +42,9 @@ The Fintek F71872F/FG Super I/O chip is almost the same, with two
 additional internal voltages monitored (VSB and battery). It also features
 6 VID inputs. The VID inputs are not yet supported by this driver.
 
+The Fintek F71806F/FG Super-I/O chip is essentially the same as the
+F71872F/FG, and is undistinguishable therefrom.
+
 The driver assumes that no more than one chip is present, which seems
 reasonable.
 

Documentation/hwmon/it87

@@ -90,7 +90,8 @@ upper VID bits share their pins with voltage inputs (in5 and in6) so you
 can't have both on a given board.
 
 The IT8716F, IT8718F and later IT8712F revisions have support for
-2 additional fans. They are not yet supported by the driver.
+2 additional fans. They are supported by the driver for the IT8716F and
+IT8718F but not for the IT8712F
 
 The IT8716F and IT8718F, and late IT8712F and IT8705F also have optional
 16-bit tachometer counters for fans 1 to 3. This is better (no more fan

Documentation/hwmon/lm78

@@ -56,16 +56,6 @@ should work with. This is hardcoded by the mainboard and/or processor itself.
 It is a value in volts. When it is unconnected, you will often find the
 value 3.50 V here.
 
-In addition to the alarms described above, there are a couple of additional
-ones. There is a BTI alarm, which gets triggered when an external chip has
-crossed its limits. Usually, this is connected to all LM75 chips; if at
-least one crosses its limits, this bit gets set. The CHAS alarm triggers
-if your computer case is open. The FIFO alarms should never trigger; it
-indicates an internal error. The SMI_IN alarm indicates some other chip
-has triggered an SMI interrupt. As we do not use SMI interrupts at all,
-this condition usually indicates there is a problem with some other
-device.
-
 If an alarm triggers, it will remain triggered until the hardware register
 is read at least once. This means that the cause for the alarm may
 already have disappeared! Note that in the current implementation, all

Documentation/hwmon/lm93

@@ -7,7 +7,7 @@ Supported chips:
     Addresses scanned: I2C 0x2c-0x2e
     Datasheet: http://www.national.com/ds.cgi/LM/LM93.pdf
 
-Author:
+Authors:
 	Mark M. Hoffman <mhoffman@lightlink.com>
 	Ported to 2.6 by Eric J. Bowersox <ericb@aspsys.com>
 	Adapted to 2.6.20 by Carsten Emde <ce@osadl.org>
@@ -16,7 +16,6 @@ Author:
 Module Parameters
 -----------------
 
-(specific to LM93)
 * init: integer
   Set to non-zero to force some initializations (default is 0).
 * disable_block: integer
@@ -37,30 +36,13 @@ Module Parameters
   I.e. this parameter controls the VID pin input thresholds; if your VID
   inputs are not working, try changing this.  The default value is "0".
 
-(common among sensor drivers)
-* force: short array (min = 1, max = 48)
-  List of adapter,address pairs to assume to be present.  Autodetection
-  of the target device will still be attempted.  Use one of the more
-  specific force directives below if this doesn't detect the device.
-* force_lm93: short array (min = 1, max = 48)
-  List of adapter,address pairs which are unquestionably assumed to contain
-  a 'lm93' chip
-* ignore: short array (min = 1, max = 48)
-  List of adapter,address pairs not to scan
-* ignore_range: short array (min = 1, max = 48)
-  List of adapter,start-addr,end-addr triples not to scan
-* probe: short array (min = 1, max = 48)
-  List of adapter,address pairs to scan additionally
-* probe_range: short array (min = 1, max = 48)
-  List of adapter,start-addr,end-addr triples to scan additionally
-
 
 Hardware Description
 --------------------
 
 (from the datasheet)
 
-The LM93, hardware monitor, has a two wire digital interface compatible with
+The LM93 hardware monitor has a two wire digital interface compatible with
 SMBus 2.0. Using an 8-bit ADC, the LM93 measures the temperature of two remote
 diode connected transistors as well as its own die and 16 power supply
 voltages. To set fan speed, the LM93 has two PWM outputs that are each
@@ -69,18 +51,12 @@ table based. The LM93 includes a digital filter that can be invoked to smooth
 temperature readings for better control of fan speed. The LM93 has four
 tachometer inputs to measure fan speed. Limit and status registers for all
 measured values are included. The LM93 builds upon the functionality of
-previous motherboard management ASICs and uses some of the LM85 s features
+previous motherboard management ASICs and uses some of the LM85's features
 (i.e. smart tachometer mode). It also adds measurement and control support
 for dynamic Vccp monitoring and PROCHOT. It is designed to monitor a dual
 processor Xeon class motherboard with a minimum of external components.
 
 
-Driver Description
-------------------
-
-This driver implements support for the National Semiconductor LM93.
-
-
 User Interface
 --------------
 
@@ -101,7 +77,7 @@ These intervals can be found in the sysfs files prochot1_interval and
 prochot2_interval.  The values in these files specify the intervals for
 #P1_PROCHOT and #P2_PROCHOT, respectively.  Selecting a value not in this
 list will cause the driver to use the next largest interval.  The available
-intervals are:
+intervals are (in seconds):
 
 #PROCHOT intervals: 0.73, 1.46, 2.9, 5.8, 11.7, 23.3, 46.6, 93.2, 186, 372
 
@@ -111,12 +87,12 @@ assert #P2_PROCHOT, and vice-versa.  This mode is enabled by writing a
 non-zero integer to the sysfs file prochot_short.
 
 The LM93 can also override the #PROCHOT pins by driving a PWM signal onto
-one or both of them.  When overridden, the signal has a period of 3.56 mS,
+one or both of them.  When overridden, the signal has a period of 3.56 ms,
 a minimum pulse width of 5 clocks (at 22.5kHz => 6.25% duty cycle), and
 a maximum pulse width of 80 clocks (at 22.5kHz => 99.88% duty cycle).
 
 The sysfs files prochot1_override and prochot2_override contain boolean
-intgers which enable or disable the override function for #P1_PROCHOT and
+integers which enable or disable the override function for #P1_PROCHOT and
 #P2_PROCHOT, respectively.  The sysfs file prochot_override_duty_cycle
 contains a value controlling the duty cycle for the PWM signal used when
 the override function is enabled.  This value ranges from 0 to 15, with 0
@@ -166,7 +142,7 @@ frequency values are constrained by the hardware.  Selecting a value which is
 not available will cause the driver to use the next largest value.  Also note
 that this parameter has implications for the Smart Tach Mode (see above).
 
-PWM Output Frequencies: 12, 36, 48, 60, 72, 84, 96, 22500 (h/w default)
+PWM Output Frequencies (in Hz): 12, 36, 48, 60, 72, 84, 96, 22500 (default)
 
 Automatic PWM:
 
@@ -178,7 +154,7 @@ individual control sources to which the PWM output is bound.
 The eight control sources are: temp1-temp4 (aka "zones" in the datasheet),
 #PROCHOT 1 & 2, and #VRDHOT 1 & 2.  The bindings are expressed as a bitmask
 in the sysfs files pwm<n>_auto_channels, where a "1" enables the binding, and
- a "0" disables it. The h/w default is 0x0f (all temperatures bound).
+a "0" disables it. The h/w default is 0x0f (all temperatures bound).
 
 	0x01 - Temp 1
 	0x02 - Temp 2
@@ -324,89 +300,3 @@ LM93 Unique sysfs Files
 
 	gpio			input state of 8 GPIO pins; read-only
 
-
-Sample Configuration File
--------------------------
-
-Here is a sample LM93 chip config for sensors.conf:
-
----------- cut here ----------
-chip "lm93-*"
-
-# VOLTAGE INPUTS
-
-	# labels and scaling based on datasheet recommendations
-	label in1	"+12V1"
-	compute in1	@ * 12.945, @ / 12.945
-	set in1_min	12 * 0.90
-	set in1_max	12 * 1.10
-
-	label in2	"+12V2"
-	compute in2	@ * 12.945, @ / 12.945
-	set in2_min	12 * 0.90
-	set in2_max	12 * 1.10
-
-	label in3	"+12V3"
-	compute in3	@ * 12.945, @ / 12.945
-	set in3_min	12 * 0.90
-	set in3_max	12 * 1.10
-
-	label in4	"FSB_Vtt"
-
-	label in5	"3GIO"
-
-	label in6	"ICH_Core"
-
-	label in7	"Vccp1"
-
-	label in8	"Vccp2"
-
-	label in9	"+3.3V"
-	set in9_min	3.3 * 0.90
-	set in9_max	3.3 * 1.10
-
-	label in10	"+5V"
-	set in10_min	5.0 * 0.90
-	set in10_max	5.0 * 1.10
-
-	label in11	"SCSI_Core"
-
-	label in12	"Mem_Core"
-
-	label in13	"Mem_Vtt"
-
-	label in14	"Gbit_Core"
-
-	# Assuming R1/R2 = 4.1143, and 3.3V reference
-	# -12V = (4.1143 + 1) * (@ - 3.3) + 3.3
-	label in15	"-12V"
-	compute in15 @ * 5.1143 - 13.57719, (@ + 13.57719) / 5.1143
-	set in15_min	-12 * 0.90
-	set in15_max	-12 * 1.10
-
-	label in16	"+3.3VSB"
-	set in16_min	3.3 * 0.90
-	set in16_max	3.3 * 1.10
-
-# TEMPERATURE INPUTS
-
-	label temp1	"CPU1"
-	label temp2	"CPU2"
-	label temp3	"LM93"
-
-# TACHOMETER INPUTS
-
-	label fan1	"Fan1"
-	set fan1_min	3000
-	label fan2	"Fan2"
-	set fan2_min	3000
-	label fan3	"Fan3"
-	set fan3_min	3000
-	label fan4	"Fan4"
-	set fan4_min	3000
-
-# PWM OUTPUTS
-
-	label pwm1	"CPU1"
-	label pwm2	"CPU2"
-