---

yaml
---
r: 39001
b: refs/heads/master
c: a43cdf0
h: refs/heads/master
i:
  38999: c239470
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 43b4f4061cf54aa225a1e94a969450ccf5305cd9
+refs/heads/master: a43cdf08a1b1ab3c013059b5fa4c1b7561e53cb7

trunk/Documentation/scsi/ChangeLog.megaraid_sas

@@ -1,4 +1,49 @@
 
+1 Release Date    : Mon Oct 02 11:21:32 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
+2 Current Version : 00.00.03.05
+3 Older Version   : 00.00.03.04
+
+i.	PCI_DEVICE macro used
+
+	Convert the pci_device_id-table of the megaraid_sas-driver to the PCI_DEVICE-macro, to safe some lines.
+
+		- Henrik Kretzschmar <henne@nachtwindheim.de>
+ii.	All compiler warnings removed
+iii.	megasas_ctrl_info struct reverted to 3.02 release
+iv.	Default value of megasas_dbg_lvl set to 0
+v.	Removing in megasas_exit the sysfs entry created for megasas_dbg_lvl
+vi.	In megasas_teardown_frame_pool(), cmd->frame was passed instead of
+	cmd->sense to pci_pool_free. Fixed. Bug was pointed out by
+	Eric Sesterhenn
+
+1 Release Date    : Wed Sep 13 14:22:51 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
+2 Current Version : 00.00.03.04
+3 Older Version   : 00.00.03.03
+
+i.	Added Reboot notify
+ii.	Reduced by 1 max cmds sent to FW from Driver to make the reply_q_sz same
+	as Max Cmds FW can support
+
+1 Release Date    : Tue Aug 22 16:33:14 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
+2 Current Version : 00.00.03.03
+3 Older Version   : 00.00.03.02
+
+i.	Send stop adapter to FW & Dump pending FW cmds before declaring adapter dead.
+	New varible added to set dbg level.
+ii.	Disable interrupt made as fn pointer as they are different for 1068 / 1078
+iii.	Frame count optimization. Main frame can contain 2 SGE for 64 bit SGLs and
+	3 SGE for 32 bit SGL
+iv.	Tasklet added for cmd completion
+v.	If FW in operational state before firing INIT, now we send RESET Flag to FW instead of just READY. This is used to do soft reset.
+vi.	megasas_ctrl_prop structure updated (based on FW struct)
+vii.	Added print : FW now in Ready State during initialization
+
+1 Release Date    : Sun Aug 06 22:49:52 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
+2 Current Version : 00.00.03.02
+3 Older Version   : 00.00.03.01
+
+i.	Added FW tranistion state for Hotplug scenario
+
 1 Release Date    : Sun May 14 22:49:52 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>
 2 Current Version : 00.00.03.01
 3 Older Version   : 00.00.02.04

trunk/drivers/message/fusion/linux_compat.h

@@ -6,13 +6,4 @@
 #include <linux/version.h>
 #include <scsi/scsi_device.h>
 
-#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,6))
-static int inline scsi_device_online(struct scsi_device *sdev)
-{
-	return sdev->online;
-}
-#endif
-
-
-/*}-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 #endif /* _LINUX_COMPAT_H */

trunk/drivers/scsi/3w-9xxx.c

@@ -2211,7 +2211,7 @@ static int __init twa_init(void)
 {
 	printk(KERN_WARNING "3ware 9000 Storage Controller device driver for Linux v%s.\n", TW_DRIVER_VERSION);
 
-	return pci_module_init(&twa_driver);
+	return pci_register_driver(&twa_driver);
 } /* End twa_init() */
 
 /* This function is called on driver exit */

trunk/drivers/scsi/3w-xxxx.c

@@ -2486,7 +2486,7 @@ static int __init tw_init(void)
 {
 	printk(KERN_WARNING "3ware Storage Controller device driver for Linux v%s.\n", TW_DRIVER_VERSION);
 
-	return pci_module_init(&tw_driver);
+	return pci_register_driver(&tw_driver);
 } /* End tw_init() */
 
 /* This function is called on driver exit */

trunk/drivers/scsi/3w-xxxx.h

@@ -74,7 +74,7 @@ static char *tw_aen_string[] = {
 	[0x00D] = "ERROR: Logical unit deleted: Unit #",
 	[0x00F] = "WARNING: SMART threshold exceeded: Port #",
 	[0x021] = "WARNING: ATA UDMA downgrade: Port #",
-	[0x021] = "WARNING: ATA UDMA upgrade: Port #",
+	[0x022] = "WARNING: ATA UDMA upgrade: Port #",
 	[0x023] = "WARNING: Sector repair occurred: Port #",
 	[0x024] = "ERROR: SBUF integrity check failure",
 	[0x025] = "ERROR: Lost cached write: Port #",

trunk/drivers/scsi/Kconfig

@@ -1016,7 +1016,7 @@ config SCSI_SYM53C8XX_MMIO
 
 config SCSI_IPR
 	tristate "IBM Power Linux RAID adapter support"
-	depends on PCI && SCSI
+	depends on PCI && SCSI && ATA
 	select FW_LOADER
 	---help---
 	  This driver supports the IBM Power Linux family RAID adapters.
@@ -1246,6 +1246,7 @@ config SCSI_QLOGICPTI
 	  module will be called qlogicpti.
 
 source "drivers/scsi/qla2xxx/Kconfig"
+source "drivers/scsi/qla4xxx/Kconfig"
 
 config SCSI_LPFC
 	tristate "Emulex LightPulse Fibre Channel Support"
@@ -1262,8 +1263,8 @@ config SCSI_SEAGATE
 	  These are 8-bit SCSI controllers; the ST-01 is also supported by
 	  this driver.  It is explained in section 3.9 of the SCSI-HOWTO,
 	  available from <http://www.tldp.org/docs.html#howto>.  If it
-	  doesn't work out of the box, you may have to change some settings in
-	  <file:drivers/scsi/seagate.h>.
+	  doesn't work out of the box, you may have to change some macros at
+	  compiletime, which are described in <file:drivers/scsi/seagate.c>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called seagate.

trunk/drivers/scsi/Makefile

@@ -84,6 +84,7 @@ obj-$(CONFIG_SCSI_QLOGIC_FAS)	+= qlogicfas408.o	qlogicfas.o
 obj-$(CONFIG_PCMCIA_QLOGIC)	+= qlogicfas408.o
 obj-$(CONFIG_SCSI_QLOGIC_1280)	+= qla1280.o 
 obj-$(CONFIG_SCSI_QLA_FC)	+= qla2xxx/
+obj-$(CONFIG_SCSI_QLA_ISCSI)	+= qla4xxx/
 obj-$(CONFIG_SCSI_LPFC)		+= lpfc/
 obj-$(CONFIG_SCSI_PAS16)	+= pas16.o
 obj-$(CONFIG_SCSI_SEAGATE)	+= seagate.o

trunk/drivers/scsi/a100u2w.c

@@ -1187,7 +1187,7 @@ static struct pci_driver inia100_pci_driver = {
 
 static int __init inia100_init(void)
 {
-	return pci_module_init(&inia100_pci_driver);
+	return pci_register_driver(&inia100_pci_driver);
 }
 
 static void __exit inia100_exit(void)

trunk/drivers/scsi/aic7xxx/aic79xx_inline.h

@@ -527,7 +527,8 @@ ahd_inw(struct ahd_softc *ahd, u_int port)
 	 * or have other side effects when the low byte is
 	 * read.
 	 */
-	return ((ahd_inb(ahd, port+1) << 8) | ahd_inb(ahd, port));
+	uint16_t r = ahd_inb(ahd, port+1) << 8;
+	return r | ahd_inb(ahd, port);
 }
 
 static __inline void

trunk/drivers/scsi/aic7xxx/aic79xx_osm_pci.c

@@ -198,7 +198,7 @@ ahd_linux_pci_dev_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 int
 ahd_linux_pci_init(void)
 {
-	return (pci_module_init(&aic79xx_pci_driver));
+	return pci_register_driver(&aic79xx_pci_driver);
 }
 
 void

trunk/drivers/scsi/aic7xxx/aic7xxx_inline.h

@@ -300,7 +300,8 @@ ahc_fetch_transinfo(struct ahc_softc *ahc, char channel, u_int our_id,
 static __inline uint16_t
 ahc_inw(struct ahc_softc *ahc, u_int port)
 {
-	return ((ahc_inb(ahc, port+1) << 8) | ahc_inb(ahc, port));
+	uint16_t r = ahc_inb(ahc, port+1) << 8;
+	return r | ahc_inb(ahc, port);
 }
 
 static __inline void

trunk/drivers/scsi/aic7xxx/aic7xxx_osm_pci.c

@@ -246,8 +246,7 @@ ahc_linux_pci_dev_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 int
 ahc_linux_pci_init(void)
 {
-	/* Translate error or zero return into zero or one */
-	return pci_module_init(&aic7xxx_pci_driver) ? 0 : 1;
+	return pci_register_driver(&aic7xxx_pci_driver);
 }
 
 void