---

yaml
---
r: 112268
b: refs/heads/master
c: 4dd9ec4
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 6861ff35ec5b60fafaf8651754c9a75142bfa9a4
+refs/heads/master: 4dd9ec4946b4651a295d3bc8df9c15ac692a8f4e

trunk/Documentation/00-INDEX

@@ -251,8 +251,6 @@ mono.txt
 	- how to execute Mono-based .NET binaries with the help of BINFMT_MISC.
 moxa-smartio
 	- file with info on installing/using Moxa multiport serial driver.
-mtrr.txt
-	- how to use PPro Memory Type Range Registers to increase performance.
 mutex-design.txt
 	- info on the generic mutex subsystem.
 namespaces/

trunk/Documentation/DMA-API.txt

@@ -337,7 +337,7 @@ With scatterlists, you use the resulting mapping like this:
 	int i, count = dma_map_sg(dev, sglist, nents, direction);
 	struct scatterlist *sg;
 
-	for (i = 0, sg = sglist; i < count; i++, sg++) {
+	for_each_sg(sglist, sg, count, i) {
 		hw_address[i] = sg_dma_address(sg);
 		hw_len[i] = sg_dma_len(sg);
 	}

trunk/Documentation/DocBook/kernel-api.tmpl

@@ -283,6 +283,7 @@ X!Earch/x86/kernel/mca_32.c
   <chapter id="security">
      <title>Security Framework</title>
 !Isecurity/security.c
+!Esecurity/inode.c
   </chapter>
 
   <chapter id="audit">
@@ -364,6 +365,10 @@ X!Edrivers/pnp/system.c
 !Eblock/blk-barrier.c
 !Eblock/blk-tag.c
 !Iblock/blk-tag.c
+!Eblock/blk-integrity.c
+!Iblock/blktrace.c
+!Iblock/genhd.c
+!Eblock/genhd.c
   </chapter>
 
   <chapter id="chrdev">

trunk/Documentation/RCU/checklist.txt

@@ -210,7 +210,7 @@ over a rather long period of time, but improvements are always welcome!
 		number of updates per grace period.
 
 9.	All RCU list-traversal primitives, which include
-	rcu_dereference(), list_for_each_rcu(), list_for_each_entry_rcu(),
+	rcu_dereference(), list_for_each_entry_rcu(),
 	list_for_each_continue_rcu(), and list_for_each_safe_rcu(),
 	must be either within an RCU read-side critical section or
 	must be protected by appropriate update-side locks.  RCU

trunk/Documentation/RCU/rcuref.txt

@@ -29,9 +29,9 @@ release_referenced()			delete()
 					}
 
 If this list/array is made lock free using RCU as in changing the
-write_lock() in add() and delete() to spin_lock and changing read_lock
-in search_and_reference to rcu_read_lock(), the atomic_get in
-search_and_reference could potentially hold reference to an element which
+write_lock() in add() and delete() to spin_lock() and changing read_lock()
+in search_and_reference() to rcu_read_lock(), the atomic_inc() in
+search_and_reference() could potentially hold reference to an element which
 has already been deleted from the list/array.  Use atomic_inc_not_zero()
 in this scenario as follows:
 
@@ -40,20 +40,20 @@ add()					search_and_reference()
 {					{
     alloc_object			    rcu_read_lock();
     ...					    search_for_element
-    atomic_set(&el->rc, 1);		    if (atomic_inc_not_zero(&el->rc)) {
-    write_lock(&list_lock);		        rcu_read_unlock();
+    atomic_set(&el->rc, 1);		    if (!atomic_inc_not_zero(&el->rc)) {
+    spin_lock(&list_lock);		        rcu_read_unlock();
 					        return FAIL;
     add_element				    }
     ...					    ...
-    write_unlock(&list_lock);		    rcu_read_unlock();
+    spin_unlock(&list_lock);		    rcu_read_unlock();
 }					}
 3.					4.
 release_referenced()			delete()
 {					{
-    ...					    write_lock(&list_lock);
+    ...					    spin_lock(&list_lock);
     if (atomic_dec_and_test(&el->rc))       ...
         call_rcu(&el->head, el_free);       delete_element
-    ...                                     write_unlock(&list_lock);
+    ...                                     spin_unlock(&list_lock);
 } 					    ...
 					    if (atomic_dec_and_test(&el->rc))
 					        call_rcu(&el->head, el_free);

trunk/Documentation/RCU/whatisRCU.txt

@@ -786,8 +786,6 @@ RCU pointer/list traversal:
 	list_for_each_entry_rcu
 	hlist_for_each_entry_rcu
 
-	list_for_each_rcu		(to be deprecated in favor of
-					 list_for_each_entry_rcu)
 	list_for_each_continue_rcu	(to be deprecated in favor of new
 					 list_for_each_entry_continue_rcu)
 

trunk/Documentation/SELinux.txt

@@ -0,0 +1,27 @@
+If you want to use SELinux, chances are you will want
+to use the distro-provided policies, or install the
+latest reference policy release from
+	http://oss.tresys.com/projects/refpolicy
+
+However, if you want to install a dummy policy for
+testing, you can do using 'mdp' provided under
+scripts/selinux.  Note that this requires the selinux
+userspace to be installed - in particular you will
+need checkpolicy to compile a kernel, and setfiles and
+fixfiles to label the filesystem.
+
+	1. Compile the kernel with selinux enabled.
+	2. Type 'make' to compile mdp.
+	3. Make sure that you are not running with
+	   SELinux enabled and a real policy.  If
+	   you are, reboot with selinux disabled
+	   before continuing.
+	4. Run install_policy.sh:
+		cd scripts/selinux
+		sh install_policy.sh
+
+Step 4 will create a new dummy policy valid for your
+kernel, with a single selinux user, role, and type.
+It will compile the policy, will set your SELINUXTYPE to
+dummy in /etc/selinux/config, install the compiled policy
+as 'dummy', and relabel your filesystem.

trunk/Documentation/block/deadline-iosched.txt

@@ -30,12 +30,18 @@ write_expire	(in ms)
 Similar to read_expire mentioned above, but for writes.
 
 
-fifo_batch
+fifo_batch	(number of requests)
 ----------
 
-When a read request expires its deadline, we must move some requests from
-the sorted io scheduler list to the block device dispatch queue. fifo_batch
-controls how many requests we move.
+Requests are grouped into ``batches'' of a particular data direction (read or
+write) which are serviced in increasing sector order.  To limit extra seeking,
+deadline expiries are only checked between batches.  fifo_batch controls the
+maximum number of requests per batch.
+
+This parameter tunes the balance between per-request latency and aggregate
+throughput.  When low latency is the primary concern, smaller is better (where
+a value of 1 yields first-come first-served behaviour).  Increasing fifo_batch
+generally improves throughput, at the cost of latency variation.
 
 
 writes_starved	(number of dispatches)

trunk/Documentation/cdrom/ide-cd

@@ -145,8 +145,7 @@ useful for reading photocds.
 
 To play an audio CD, you should first unmount and remove any data
 CDROM.  Any of the CDROM player programs should then work (workman,
-workbone, cdplayer, etc.).  Lacking anything else, you could use the
-cdtester program in Documentation/cdrom/sbpcd.
+workbone, cdplayer, etc.).
 
 On a few drives, you can read digital audio directly using a program
 such as cdda2wav.  The only types of drive which I've heard support

trunk/Documentation/cpu-freq/index.txt

@@ -35,11 +35,9 @@ Mailing List
 ------------
 There is a CPU frequency changing CVS commit and general list where
 you can report bugs, problems or submit patches. To post a message,
-send an email to cpufreq@lists.linux.org.uk, to subscribe go to
-http://lists.linux.org.uk/mailman/listinfo/cpufreq. Previous post to the
-mailing list are available to subscribers at
-http://lists.linux.org.uk/mailman/private/cpufreq/.
-
+send an email to cpufreq@vger.kernel.org, to subscribe go to
+http://vger.kernel.org/vger-lists.html#cpufreq and follow the
+instructions there.
 
 Links
 -----
@@ -50,7 +48,7 @@ how to access the CVS repository:
 * http://cvs.arm.linux.org.uk/
 
 the CPUFreq Mailing list:
-* http://lists.linux.org.uk/mailman/listinfo/cpufreq
+* http://vger.kernel.org/vger-lists.html#cpufreq
 
 Clock and voltage scaling for the SA-1100:
 * http://www.lartmaker.nl/projects/scaling

trunk/Documentation/hwmon/adt7473

@@ -14,14 +14,14 @@ Description
 
 This driver implements support for the Analog Devices ADT7473 chip family.
 
-The LM85 uses the 2-wire interface compatible with the SMBUS 2.0
+The ADT7473 uses the 2-wire interface compatible with the SMBUS 2.0
 specification. Using an analog to digital converter it measures three (3)
-temperatures and two (2) voltages. It has three (3) 16-bit counters for
+temperatures and two (2) voltages. It has four (4) 16-bit counters for
 measuring fan speed. There are three (3) PWM outputs that can be used
 to control fan speed.
 
 A sophisticated control system for the PWM outputs is designed into the
-LM85 that allows fan speed to be adjusted automatically based on any of the
+ADT7473 that allows fan speed to be adjusted automatically based on any of the
 three temperature sensors. Each PWM output is individually adjustable and
 programmable. Once configured, the ADT7473 will adjust the PWM outputs in
 response to the measured temperatures without further host intervention.
@@ -46,23 +46,15 @@ from the raw value to get the temperature value.
 The Analog Devices datasheet is very detailed and describes a procedure for
 determining an optimal configuration for the automatic PWM control.
 
-Hardware Configurations
------------------------
-
-The ADT7473 chips have an optional SMBALERT output that can be used to
-signal the chipset in case a limit is exceeded or the temperature sensors
-fail. Individual sensor interrupts can be masked so they won't trigger
-SMBALERT. The SMBALERT output if configured replaces the PWM2 function.
-
 Configuration Notes
 -------------------
 
 Besides standard interfaces driver adds the following:
 
 * PWM Control
 
-* pwm#_auto_point1_pwm and pwm#_auto_point1_temp and
-* pwm#_auto_point2_pwm and pwm#_auto_point2_temp -
+* pwm#_auto_point1_pwm and temp#_auto_point1_temp and
+* pwm#_auto_point2_pwm and temp#_auto_point2_temp -
 
 point1: Set the pwm speed at a lower temperature bound.
 point2: Set the pwm speed at a higher temperature bound.

trunk/Documentation/hwmon/sysfs-interface

@@ -329,6 +329,10 @@ power[1-*]_average		Average power use
 				Unit: microWatt
 				RO
 
+power[1-*]_average_interval	Power use averaging interval
+				Unit: milliseconds
+				RW
+
 power[1-*]_average_highest	Historical average maximum power use
 				Unit: microWatt
 				RO
@@ -353,6 +357,14 @@ power[1-*]_reset_history	Reset input_highest, input_lowest,
 				average_highest and average_lowest.
 				WO
 
+**********
+* Energy *
+**********
+
+energy[1-*]_input		Cumulative energy use
+				Unit: microJoule
+				RO
+
 **********
 * Alarms *
 **********

trunk/Documentation/kernel-doc-nano-HOWTO.txt

@@ -168,10 +168,10 @@ if ($#ARGV < 0) {
 mkdir $ARGV[0],0777;
 $state = 0;
 while (<STDIN>) {
-    if (/^\.TH \"[^\"]*\" 4 \"([^\"]*)\"/) {
+    if (/^\.TH \"[^\"]*\" 9 \"([^\"]*)\"/) {
 	if ($state == 1) { close OUT }
 	$state = 1;
-	$fn = "$ARGV[0]/$1.4";
+	$fn = "$ARGV[0]/$1.9";
 	print STDERR "Creating $fn\n";
 	open OUT, ">$fn" or die "can't open $fn: $!\n";
 	print OUT $_;

trunk/Documentation/kernel-parameters.txt

@@ -463,12 +463,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			Range: 0 - 8192
 			Default: 64
 
-	disable_8254_timer
-	enable_8254_timer
-			[IA32/X86_64] Disable/Enable interrupt 0 timer routing
-			over the 8254 in addition to over the IO-APIC. The
-			kernel tries to set a sensible default.
-
 	hpet=		[X86-32,HPET] option to control HPET usage
 			Format: { enable (default) | disable | force }
 			disable: disable HPET and use PIT instead
@@ -1020,6 +1014,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			(only serial suported for now)
 			Format: <serial_device>[,baud]
 
+	kmac=		[MIPS] korina ethernet MAC address.
+			Configure the RouterBoard 532 series on-chip
+			Ethernet adapter MAC address.
+
 	l2cr=		[PPC]
 
 	l3cr=		[PPC]
@@ -1882,6 +1880,12 @@ and is between 256 and 4096 characters. It is defined in the file
 	shapers=	[NET]
 			Maximal number of shapers.
 
+	show_msr=	[x86] show boot-time MSR settings
+			Format: { <integer> }
+			Show boot-time (BIOS-initialized) MSR settings.
+			The parameter means the number of CPUs to show,
+			for example 1 means boot CPU only.
+
 	sim710=		[SCSI,HW]
 			See header of drivers/scsi/sim710.c.
 

trunk/Documentation/s390/CommonIO

@@ -70,13 +70,19 @@ Command line parameters
 
   Note: While already known devices can be added to the list of devices to be
         ignored, there will be no effect on then. However, if such a device
-	disappears and then reappears, it will then be ignored.
+	disappears and then reappears, it will then be ignored. To make
+	known devices go away, you need the "purge" command (see below).
 
   For example,
 	"echo add 0.0.a000-0.0.accc, 0.0.af00-0.0.afff > /proc/cio_ignore"
   will add 0.0.a000-0.0.accc and 0.0.af00-0.0.afff to the list of ignored
   devices.
 
+  You can remove already known but now ignored devices via
+	"echo purge > /proc/cio_ignore"
+  All devices ignored but still registered and not online (= not in use)
+  will be deregistered and thus removed from the system.
+
   The devices can be specified either by bus id (0.x.abcd) or, for 2.4 backward
   compatibility, by the device number in hexadecimal (0xabcd or abcd). Device
   numbers given as 0xabcd will be interpreted as 0.0.abcd.
@@ -98,8 +104,7 @@ debugfs entries
     handling).
 
   - /sys/kernel/debug/s390dbf/cio_msg/sprintf
-    Various debug messages from the common I/O-layer, including messages
-    printed when cio_msg=yes.
+    Various debug messages from the common I/O-layer.
 
   - /sys/kernel/debug/s390dbf/cio_trace/hex_ascii
     Logs the calling of functions in the common I/O-layer and, if applicable,