---

yaml
---
r: 38627
b: refs/heads/master
c: f3b270a
h: refs/heads/master
i:
  38625: b2b3ee2
  38623: 822063a
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 116ad29d9839610d2811a1962cac7f3f2a9f9295
+refs/heads/master: f3b270a47882b958e9e3c5bd86894e3a7072899a

trunk/Documentation/filesystems/ntfs.txt

@@ -457,6 +457,12 @@ ChangeLog
 
 Note, a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog.
 
+2.1.26:
+	- Implement support for sector sizes above 512 bytes (up to the maximum
+	  supported by NTFS which is 4096 bytes).
+	- Enhance support for NTFS volumes which were supported by Windows but
+	  not by Linux due to invalid attribute list attribute flags.
+	- A few minor updates and bug fixes.
 2.1.25:
 	- Write support is now extended with write(2) being able to both
 	  overwrite existing file data and to extend files.  Also, if a write

trunk/Documentation/filesystems/tmpfs.txt

@@ -92,6 +92,15 @@ NodeList format is a comma-separated list of decimal numbers and ranges,
 a range being two hyphen-separated decimal numbers, the smallest and
 largest node numbers in the range.  For example, mpol=bind:0-3,5,7,9-15
 
+Note that trying to mount a tmpfs with an mpol option will fail if the
+running kernel does not support NUMA; and will fail if its nodelist
+specifies a node >= MAX_NUMNODES.  If your system relies on that tmpfs
+being mounted, but from time to time runs a kernel built without NUMA
+capability (perhaps a safe recovery kernel), or configured to support
+fewer nodes, then it is advisable to omit the mpol option from automatic
+mount options.  It can be added later, when the tmpfs is already mounted
+on MountPoint, by 'mount -o remount,mpol=Policy:NodeList MountPoint'.
+
 
 To specify the initial root directory you can use the following mount
 options:

trunk/Documentation/x86_64/boot-options.txt

@@ -52,6 +52,10 @@ APICs
 		 apicmaintimer. Useful when your PIT timer is totally
 		 broken.
 
+   disable_8254_timer / enable_8254_timer
+		 Enable interrupt 0 timer routing over the 8254 in addition to over
+	         the IO-APIC. The kernel tries to set a sensible default.
+
 Early Console
 
    syntax: earlyprintk=vga

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 16
-EXTRAVERSION =-rc4
+EXTRAVERSION =-rc5
 NAME=Sliding Snow Leopard
 
 # *DOCUMENTATION*

trunk/arch/arm/mach-at91rm9200/gpio.c

@@ -274,8 +274,18 @@ static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs
 		gpio = &irq_desc[pin];
 
 		while (isr) {
-			if (isr & 1)
-				gpio->handle(pin, gpio, regs);
+			if (isr & 1) {
+				if (unlikely(gpio->disable_depth)) {
+					/*
+					 * The core ARM interrupt handler lazily disables IRQs so
+					 * another IRQ must be generated before it actually gets
+					 * here to be disabled on the GPIO controller.
+					 */
+					gpio_irq_mask(pin);
+				}
+				else
+					gpio->handle(pin, gpio, regs);
+			}
 			pin++;
 			gpio++;
 			isr >>= 1;

trunk/arch/i386/Kconfig

@@ -733,7 +733,7 @@ config PHYSICAL_START
 
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
-	depends on SMP && HOTPLUG && EXPERIMENTAL
+	depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
 	---help---
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.
@@ -1060,6 +1060,7 @@ source "arch/i386/oprofile/Kconfig"
 
 config KPROBES
 	bool "Kprobes (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && MODULES
 	help
 	  Kprobes allows you to trap at almost any kernel address and
 	  execute a callback function.  register_kprobe() establishes

trunk/arch/i386/kernel/Makefile

@@ -7,7 +7,7 @@ extra-y := head.o init_task.o vmlinux.lds
 obj-y	:= process.o semaphore.o signal.o entry.o traps.o irq.o \
 		ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \
 		pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o \
-		quirks.o i8237.o
+		quirks.o i8237.o topology.o
 
 obj-y				+= cpu/
 obj-y				+= timers/

trunk/arch/i386/kernel/acpi/boot.c

@@ -44,9 +44,6 @@ extern void __init clustered_apic_check(void);
 extern int gsi_irq_sharing(int gsi);
 #include <asm/proto.h>
 
-static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return 0; }
-
-
 #else				/* X86 */
 
 #ifdef	CONFIG_X86_LOCAL_APIC

trunk/arch/i386/kernel/cpu/common.c

@@ -4,6 +4,7 @@
 #include <linux/smp.h>
 #include <linux/module.h>
 #include <linux/percpu.h>
+#include <linux/bootmem.h>
 #include <asm/semaphore.h>
 #include <asm/processor.h>
 #include <asm/i387.h>
@@ -18,6 +19,9 @@
 
 #include "cpu.h"
 
+DEFINE_PER_CPU(struct Xgt_desc_struct, cpu_gdt_descr);
+EXPORT_PER_CPU_SYMBOL(cpu_gdt_descr);
+
 DEFINE_PER_CPU(unsigned char, cpu_16bit_stack[CPU_16BIT_STACK_SIZE]);
 EXPORT_PER_CPU_SYMBOL(cpu_16bit_stack);
 
@@ -571,8 +575,9 @@ void __devinit cpu_init(void)
 	int cpu = smp_processor_id();
 	struct tss_struct * t = &per_cpu(init_tss, cpu);
 	struct thread_struct *thread = &current->thread;
-	struct desc_struct *gdt = get_cpu_gdt_table(cpu);
+	struct desc_struct *gdt;
 	__u32 stk16_off = (__u32)&per_cpu(cpu_16bit_stack, cpu);
+	struct Xgt_desc_struct *cpu_gdt_descr = &per_cpu(cpu_gdt_descr, cpu);
 
 	if (cpu_test_and_set(cpu, cpu_initialized)) {
 		printk(KERN_WARNING "CPU#%d already initialized!\n", cpu);
@@ -589,6 +594,25 @@ void __devinit cpu_init(void)
 		set_in_cr4(X86_CR4_TSD);
 	}
 
+	/*
+	 * This is a horrible hack to allocate the GDT.  The problem
+	 * is that cpu_init() is called really early for the boot CPU
+	 * (and hence needs bootmem) but much later for the secondary
+	 * CPUs, when bootmem will have gone away
+	 */
+	if (NODE_DATA(0)->bdata->node_bootmem_map) {
+		gdt = (struct desc_struct *)alloc_bootmem_pages(PAGE_SIZE);
+		/* alloc_bootmem_pages panics on failure, so no check */
+		memset(gdt, 0, PAGE_SIZE);
+	} else {
+		gdt = (struct desc_struct *)get_zeroed_page(GFP_KERNEL);
+		if (unlikely(!gdt)) {
+			printk(KERN_CRIT "CPU%d failed to allocate GDT\n", cpu);
+			for (;;)
+				local_irq_enable();
+		}
+	}
+
 	/*
 	 * Initialize the per-CPU GDT with the boot GDT,
 	 * and set up the GDT descriptor:
@@ -601,10 +625,10 @@ void __devinit cpu_init(void)
 		((((__u64)stk16_off) << 32) & 0xff00000000000000ULL) |
 		(CPU_16BIT_STACK_SIZE - 1);
 
-	cpu_gdt_descr[cpu].size = GDT_SIZE - 1;
- 	cpu_gdt_descr[cpu].address = (unsigned long)gdt;
+	cpu_gdt_descr->size = GDT_SIZE - 1;
+ 	cpu_gdt_descr->address = (unsigned long)gdt;
 
-	load_gdt(&cpu_gdt_descr[cpu]);
+	load_gdt(cpu_gdt_descr);
 	load_idt(&idt_descr);
 
 	/*

trunk/arch/i386/kernel/efi.c

@@ -103,17 +103,19 @@ static void efi_call_phys_prelog(void)
 	 */
 	local_flush_tlb();
 
-	cpu_gdt_descr[0].address = __pa(cpu_gdt_descr[0].address);
-	load_gdt((struct Xgt_desc_struct *) __pa(&cpu_gdt_descr[0]));
+	per_cpu(cpu_gdt_descr, 0).address =
+				 __pa(per_cpu(cpu_gdt_descr, 0).address);
+	load_gdt((struct Xgt_desc_struct *)__pa(&per_cpu(cpu_gdt_descr, 0)));
 }
 
 static void efi_call_phys_epilog(void)
 {
 	unsigned long cr4;
 
-	cpu_gdt_descr[0].address =
-		(unsigned long) __va(cpu_gdt_descr[0].address);
-	load_gdt(&cpu_gdt_descr[0]);
+	per_cpu(cpu_gdt_descr, 0).address =
+			(unsigned long)__va(per_cpu(cpu_gdt_descr, 0).address);
+	load_gdt((struct Xgt_desc_struct *)__va(&per_cpu(cpu_gdt_descr, 0)));
+
 	cr4 = read_cr4();
 
 	if (cr4 & X86_CR4_PSE) {

trunk/arch/i386/kernel/head.S

@@ -534,5 +534,3 @@ ENTRY(cpu_gdt_table)
 	.quad 0x0000000000000000	/* 0xf0 - unused */
 	.quad 0x0000000000000000	/* 0xf8 - GDT entry 31: double-fault TSS */
 
-	/* Be sure this is zeroed to avoid false validations in Xen */
-	.fill PAGE_SIZE_asm / 8 - GDT_ENTRIES,8,0

trunk/arch/i386/kernel/i386_ksyms.c

@@ -3,8 +3,6 @@
 #include <asm/checksum.h>
 #include <asm/desc.h>
 
-EXPORT_SYMBOL_GPL(cpu_gdt_descr);
-
 EXPORT_SYMBOL(__down_failed);
 EXPORT_SYMBOL(__down_failed_interruptible);
 EXPORT_SYMBOL(__down_failed_trylock);

trunk/arch/i386/kernel/io_apic.c

@@ -2566,8 +2566,10 @@ int __init io_apic_get_unique_id (int ioapic, int apic_id)
 		spin_unlock_irqrestore(&ioapic_lock, flags);
 
 		/* Sanity check */
-		if (reg_00.bits.ID != apic_id)
-			panic("IOAPIC[%d]: Unable change apic_id!\n", ioapic);
+		if (reg_00.bits.ID != apic_id) {
+			printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic);
+			return -1;
+		}
 	}
 
 	apic_printk(APIC_VERBOSE, KERN_INFO

trunk/arch/i386/kernel/kprobes.c

@@ -58,6 +58,11 @@ static inline int is_IF_modifier(kprobe_opcode_t opcode)
 
 int __kprobes arch_prepare_kprobe(struct kprobe *p)
 {
+	/* insn: must be on special executable page on i386. */
+	p->ainsn.insn = get_insn_slot();
+	if (!p->ainsn.insn)
+		return -ENOMEM;
+
 	memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
 	p->opcode = *p->addr;
 	return 0;
@@ -77,6 +82,13 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p)
 			   (unsigned long) p->addr + sizeof(kprobe_opcode_t));
 }
 
+void __kprobes arch_remove_kprobe(struct kprobe *p)
+{
+	down(&kprobe_mutex);
+	free_insn_slot(p->ainsn.insn);
+	up(&kprobe_mutex);
+}
+
 static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
 	kcb->prev_kprobe.kp = kprobe_running();
@@ -111,7 +123,7 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
 	if (p->opcode == BREAKPOINT_INSTRUCTION)
 		regs->eip = (unsigned long)p->addr;
 	else
-		regs->eip = (unsigned long)&p->ainsn.insn;
+		regs->eip = (unsigned long)p->ainsn.insn;
 }
 
 /* Called with kretprobe_lock held */
@@ -351,7 +363,7 @@ static void __kprobes resume_execution(struct kprobe *p,
 {
 	unsigned long *tos = (unsigned long *)&regs->esp;
 	unsigned long next_eip = 0;
-	unsigned long copy_eip = (unsigned long)&p->ainsn.insn;
+	unsigned long copy_eip = (unsigned long)p->ainsn.insn;
 	unsigned long orig_eip = (unsigned long)p->addr;
 
 	switch (p->ainsn.insn[0]) {

trunk/arch/i386/kernel/mpparse.c

@@ -915,6 +915,7 @@ void __init mp_register_ioapic (
 	u32			gsi_base)
 {
 	int			idx = 0;
+	int			tmpid;
 
 	if (nr_ioapics >= MAX_IO_APICS) {
 		printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
@@ -935,9 +936,14 @@ void __init mp_register_ioapic (
 
 	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
 	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && (boot_cpu_data.x86 < 15))
-		mp_ioapics[idx].mpc_apicid = io_apic_get_unique_id(idx, id);
+		tmpid = io_apic_get_unique_id(idx, id);
 	else
-		mp_ioapics[idx].mpc_apicid = id;
+		tmpid = id;
+	if (tmpid == -1) {
+		nr_ioapics--;
+		return;
+	}
+	mp_ioapics[idx].mpc_apicid = tmpid;
 	mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
 
 	/* 

trunk/arch/i386/kernel/smpboot.c

@@ -898,12 +898,6 @@ static int __devinit do_boot_cpu(int apicid, int cpu)
 	unsigned long start_eip;
 	unsigned short nmi_high = 0, nmi_low = 0;
 
-	if (!cpu_gdt_descr[cpu].address &&
-	    !(cpu_gdt_descr[cpu].address = get_zeroed_page(GFP_KERNEL))) {
-		printk("Failed to allocate GDT for CPU %d\n", cpu);
-		return 1;
-	}
-
 	++cpucount;
 
 	/*

trunk/arch/i386/mach-default/topology.c → trunk/arch/i386/kernel/topology.c

@@ -1,12 +1,12 @@
 /*
- * arch/i386/mach-generic/topology.c - Populate driverfs with topology information
+ * arch/i386/kernel/topology.c - Populate driverfs with topology information
  *
  * Written by: Matthew Dobson, IBM Corporation
  * Original Code: Paul Dorwin, IBM Corporation, Patrick Mochel, OSDL
  *
  * Copyright (C) 2002, IBM Corp.
  *
- * All rights reserved.          
+ * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -34,7 +34,7 @@ static struct i386_cpu cpu_devices[NR_CPUS];
 
 int arch_register_cpu(int num){
 	struct node *parent = NULL;
-	
+
 #ifdef CONFIG_NUMA
 	int node = cpu_to_node(num);
 	if (node_online(node))

trunk/arch/i386/mach-default/Makefile

@@ -2,4 +2,4 @@
 # Makefile for the linux kernel.
 #
 
-obj-y				:= setup.o topology.o
+obj-y				:= setup.o

trunk/arch/i386/mach-voyager/voyager_basic.c

@@ -23,6 +23,8 @@
 #include <linux/delay.h>
 #include <linux/reboot.h>
 #include <linux/sysrq.h>
+#include <linux/smp.h>
+#include <linux/nodemask.h>
 #include <asm/io.h>
 #include <asm/voyager.h>
 #include <asm/vic.h>
@@ -328,4 +330,3 @@ void machine_power_off(void)
 	if (pm_power_off)
 		pm_power_off();
 }
-

trunk/arch/i386/mach-voyager/voyager_smp.c

@@ -402,6 +402,7 @@ find_smp_config(void)
 	cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 1) << 8;
 	cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 2) << 16;
 	cpus_addr(phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 3) << 24;
+	cpu_possible_map = phys_cpu_present_map;
 	printk("VOYAGER SMP: phys_cpu_present_map = 0x%lx\n", cpus_addr(phys_cpu_present_map)[0]);
 	/* Here we set up the VIC to enable SMP */
 	/* enable the CPIs by writing the base vector to their register */

trunk/arch/ia64/Kconfig

@@ -453,6 +453,7 @@ source "arch/ia64/oprofile/Kconfig"
 
 config KPROBES
 	bool "Kprobes (EXPERIMENTAL)"
+	depends on EXPERIMENTAL && MODULES
 	help
 	  Kprobes allows you to trap at almost any kernel address and
 	  execute a callback function.  register_kprobe() establishes

trunk/arch/m32r/Makefile

@@ -12,14 +12,14 @@ CFLAGS_MODULE += -mmodel=large
 
 ifdef CONFIG_CHIP_VDEC2
 cflags-$(CONFIG_ISA_M32R2)	+= -DNO_FPU -Wa,-bitinst
-aflags-$(CONFIG_ISA_M32R2)	+= -DNO_FPU -Wa,-bitinst
+aflags-$(CONFIG_ISA_M32R2)	+= -DNO_FPU -O2 -Wa,-bitinst -Wa,-no-parallel
 else
 cflags-$(CONFIG_ISA_M32R2)	+= -DNO_FPU -m32r2
-aflags-$(CONFIG_ISA_M32R2)	+= -DNO_FPU -m32r2
+aflags-$(CONFIG_ISA_M32R2)	+= -DNO_FPU -m32r2 -O2
 endif
 
 cflags-$(CONFIG_ISA_M32R)	+= -DNO_FPU
-aflags-$(CONFIG_ISA_M32R)	+= -DNO_FPU -Wa,-no-bitinst
+aflags-$(CONFIG_ISA_M32R)	+= -DNO_FPU -O2 -Wa,-no-bitinst
 
 CFLAGS += $(cflags-y)
 AFLAGS += $(aflags-y)