staging:iio:adis16209: Use adis library

Use the new adis library for the adis16209 driver. This allows us to completely scrap the adis16209 buffer and trigger code and more than half of the core driver code. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
git-mirror · Nov 19, 2012 · 511fb29 · 511fb29
1 parent 5bd22f5
commit 511fb29
Show file tree

Hide file tree

Showing 6 changed files with 74 additions and 699 deletions.
diff --git a/drivers/staging/iio/accel/Kconfig b/drivers/staging/iio/accel/Kconfig
@@ -33,8 +33,8 @@ config ADIS16204
 config ADIS16209
 	tristate "Analog Devices ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer"
 	depends on SPI
-	select IIO_TRIGGER if IIO_BUFFER
-	select IIO_SW_RING if IIO_BUFFER
+	select IIO_ADIS_LIB
+	select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
 	help
 	  Say yes here to build support for Analog Devices adis16209 dual-axis digital inclinometer
 	  and accelerometer.

diff --git a/drivers/staging/iio/accel/Makefile b/drivers/staging/iio/accel/Makefile
@@ -12,7 +12,6 @@ adis16204-y             := adis16204_core.o
 obj-$(CONFIG_ADIS16204) += adis16204.o
 
 adis16209-y             := adis16209_core.o
-adis16209-$(CONFIG_IIO_BUFFER) += adis16209_ring.o adis16209_trigger.o
 obj-$(CONFIG_ADIS16209) += adis16209.o
 
 adis16220-y             := adis16220_core.o

diff --git a/drivers/staging/iio/accel/adis16209.h b/drivers/staging/iio/accel/adis16209.h
@@ -3,9 +3,6 @@
 
 #define ADIS16209_STARTUP_DELAY	220 /* ms */
 
-#define ADIS16209_READ_REG(a)    a
-#define ADIS16209_WRITE_REG(a) ((a) | 0x80)
-
 /* Flash memory write count */
 #define ADIS16209_FLASH_CNT      0x00
 /* Output, power supply */
@@ -61,8 +58,6 @@
 /* Operation, system command register */
 #define ADIS16209_GLOB_CMD       0x3E
 
-#define ADIS16209_OUTPUTS        8
-
 /* MSC_CTRL */
 /* Self-test at power-on: 1 = disabled, 0 = enabled */
 #define ADIS16209_MSC_CTRL_PWRUP_SELF_TEST	(1 << 10)
@@ -81,44 +76,23 @@
 /* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
 #define ADIS16209_DIAG_STAT_ALARM1        (1<<8)
 /* Self-test diagnostic error flag: 1 = error condition, 0 = normal operation */
-#define ADIS16209_DIAG_STAT_SELFTEST_FAIL (1<<5)
+#define ADIS16209_DIAG_STAT_SELFTEST_FAIL_BIT	5
 /* SPI communications failure */
-#define ADIS16209_DIAG_STAT_SPI_FAIL	  (1<<3)
+#define ADIS16209_DIAG_STAT_SPI_FAIL_BIT	3
 /* Flash update failure */
-#define ADIS16209_DIAG_STAT_FLASH_UPT	  (1<<2)
+#define ADIS16209_DIAG_STAT_FLASH_UPT_BIT	2
 /* Power supply above 3.625 V */
-#define ADIS16209_DIAG_STAT_POWER_HIGH	  (1<<1)
+#define ADIS16209_DIAG_STAT_POWER_HIGH_BIT	1
 /* Power supply below 3.15 V */
-#define ADIS16209_DIAG_STAT_POWER_LOW	  (1<<0)
+#define ADIS16209_DIAG_STAT_POWER_LOW_BIT	0
 
 /* GLOB_CMD */
 #define ADIS16209_GLOB_CMD_SW_RESET	(1<<7)
 #define ADIS16209_GLOB_CMD_CLEAR_STAT	(1<<4)
 #define ADIS16209_GLOB_CMD_FACTORY_CAL	(1<<1)
 
-#define ADIS16209_MAX_TX 24
-#define ADIS16209_MAX_RX 24
-
 #define ADIS16209_ERROR_ACTIVE          (1<<14)
 
-/**
- * struct adis16209_state - device instance specific data
- * @us:			actual spi_device
- * @trig:		data ready trigger registered with iio
- * @tx:			transmit buffer
- * @rx:			receive buffer
- * @buf_lock:		mutex to protect tx and rx
- **/
-struct adis16209_state {
-	struct spi_device	*us;
-	struct iio_trigger	*trig;
-	struct mutex		buf_lock;
-	u8			tx[ADIS16209_MAX_TX] ____cacheline_aligned;
-	u8			rx[ADIS16209_MAX_RX];
-};
-
-int adis16209_set_irq(struct iio_dev *indio_dev, bool enable);
-
 #define ADIS16209_SCAN_SUPPLY	0
 #define ADIS16209_SCAN_ACC_X	1
 #define ADIS16209_SCAN_ACC_Y	2
@@ -128,45 +102,4 @@ int adis16209_set_irq(struct iio_dev *indio_dev, bool enable);
 #define ADIS16209_SCAN_INCLI_Y	6
 #define ADIS16209_SCAN_ROT	7
 
-#ifdef CONFIG_IIO_BUFFER
-
-void adis16209_remove_trigger(struct iio_dev *indio_dev);
-int adis16209_probe_trigger(struct iio_dev *indio_dev);
-
-ssize_t adis16209_read_data_from_ring(struct device *dev,
-				      struct device_attribute *attr,
-				      char *buf);
-
-int adis16209_configure_ring(struct iio_dev *indio_dev);
-void adis16209_unconfigure_ring(struct iio_dev *indio_dev);
-
-#else /* CONFIG_IIO_BUFFER */
-
-static inline void adis16209_remove_trigger(struct iio_dev *indio_dev)
-{
-}
-
-static inline int adis16209_probe_trigger(struct iio_dev *indio_dev)
-{
-	return 0;
-}
-
-static inline ssize_t
-adis16209_read_data_from_ring(struct device *dev,
-			      struct device_attribute *attr,
-			      char *buf)
-{
-	return 0;
-}
-
-static int adis16209_configure_ring(struct iio_dev *indio_dev)
-{
-	return 0;
-}
-
-static inline void adis16209_unconfigure_ring(struct iio_dev *indio_dev)
-{
-}
-
-#endif /* CONFIG_IIO_BUFFER */
 #endif /* SPI_ADIS16209_H_ */