ARM: at91: at91sam9x5: add DT parameters to enable PMECC

Default ecc correctable setting is 2bits in 512 bytes. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
git-mirror · Feb 7, 2013 · 5314bc2 · 5314bc2
1 parent 88b62b9
commit 5314bc2
Show file tree

Hide file tree

Showing 2 changed files with 8 additions and 1 deletion.
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -518,7 +518,11 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x40000000 0x10000000
+			       0xffffe000 0x600		/* PMECC Registers */
+			       0xffffe600 0x200		/* PMECC Error Location Registers */
+			       0x00108000 0x18000	/* PMECC looup table in ROM code  */
 			      >;
+			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
 			pinctrl-names = "default";

diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -26,7 +26,10 @@
 	ahb {
 		nand0: nand@40000000 {
 			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
+			nand-ecc-mode = "hw";
+			atmel,has-pmecc;	/* Enable PMECC */
+			atmel,pmecc-cap = <2>;
+			atmel,pmecc-sector-size = <512>;
 			nand-on-flash-bbt;
 			status = "okay";