---

yaml
---
r: 21211
b: refs/heads/master
c: 70c07e0
h: refs/heads/master
i:
  21209: e6ccc01
  21207: 41a83ab
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 2746b8623abce815aaae7afc946b1b39f8436f5a
+refs/heads/master: 70c07e02625ec46d0ffbfce1acef42d660803528

trunk/Documentation/feature-removal-schedule.txt

@@ -151,6 +151,13 @@ Who:	Ralf Baechle <ralf@linux-mips.org>
 
 ---------------------------
 
+What:   eepro100 network driver
+When:   January 2007
+Why:    replaced by the e100 driver
+Who:    Adrian Bunk <bunk@stusta.de>
+
+---------------------------
+
 What:	Legacy /proc/pci interface (PCI_LEGACY_PROC)
 When:	March 2006
 Why:	deprecated since 2.5.53 in favor of lspci(8)

trunk/arch/ppc/platforms/hdpu.c

@@ -319,11 +319,10 @@ static void __init hdpu_fixup_eth_pdata(struct platform_device *pd)
 	struct mv643xx_eth_platform_data *eth_pd;
 	eth_pd = pd->dev.platform_data;
 
-	eth_pd->port_serial_control =
-	    mv64x60_read(&bh, MV643XX_ETH_PORT_SERIAL_CONTROL_REG(pd->id) & ~1);
-
 	eth_pd->force_phy_addr = 1;
 	eth_pd->phy_addr = pd->id;
+	eth_pd->speed = SPEED_100;
+	eth_pd->duplex = DUPLEX_FULL;
 	eth_pd->tx_queue_size = 400;
 	eth_pd->rx_queue_size = 800;
 }

trunk/drivers/net/3c523.c

@@ -105,6 +105,7 @@
 #include <linux/mca-legacy.h>
 #include <linux/ethtool.h>
 #include <linux/bitops.h>
+#include <linux/jiffies.h>
 
 #include <asm/uaccess.h>
 #include <asm/processor.h>
@@ -658,7 +659,7 @@ static int init586(struct net_device *dev)
 
 	s = jiffies;		/* warning: only active with interrupts on !! */
 	while (!(cfg_cmd->cmd_status & STAT_COMPL)) {
-		if (jiffies - s > 30*HZ/100)
+		if (time_after(jiffies, s + 30*HZ/100))
 			break;
 	}
 
@@ -684,7 +685,7 @@ static int init586(struct net_device *dev)
 
 	s = jiffies;
 	while (!(ias_cmd->cmd_status & STAT_COMPL)) {
-		if (jiffies - s > 30*HZ/100)
+		if (time_after(jiffies, s + 30*HZ/100))
 			break;
 	}
 
@@ -709,7 +710,7 @@ static int init586(struct net_device *dev)
 
 	s = jiffies;
 	while (!(tdr_cmd->cmd_status & STAT_COMPL)) {
-		if (jiffies - s > 30*HZ/100) {
+		if (time_after(jiffies, s + 30*HZ/100)) {
 			printk(KERN_WARNING "%s: %d Problems while running the TDR.\n", dev->name, __LINE__);
 			result = 1;
 			break;
@@ -798,7 +799,7 @@ static int init586(struct net_device *dev)
 			elmc_id_attn586();
 			s = jiffies;
 			while (!(mc_cmd->cmd_status & STAT_COMPL)) {
-				if (jiffies - s > 30*HZ/100)
+				if (time_after(jiffies, s + 30*HZ/100))
 					break;
 			}
 			if (!(mc_cmd->cmd_status & STAT_COMPL)) {

trunk/drivers/net/3c59x.c

@@ -258,6 +258,7 @@ static int vortex_debug = 1;
 #include <linux/highmem.h>
 #include <linux/eisa.h>
 #include <linux/bitops.h>
+#include <linux/jiffies.h>
 #include <asm/irq.h>			/* For NR_IRQS only. */
 #include <asm/io.h>
 #include <asm/uaccess.h>
@@ -2724,7 +2725,7 @@ boomerang_rx(struct net_device *dev)
 			skb = dev_alloc_skb(PKT_BUF_SZ);
 			if (skb == NULL) {
 				static unsigned long last_jif;
-				if ((jiffies - last_jif) > 10 * HZ) {
+				if (time_after(jiffies, last_jif + 10 * HZ)) {
 					printk(KERN_WARNING "%s: memory shortage\n", dev->name);
 					last_jif = jiffies;
 				}

trunk/drivers/net/apne.c

@@ -36,6 +36,7 @@
 #include <linux/delay.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
+#include <linux/jiffies.h>
 
 #include <asm/system.h>
 #include <asm/io.h>
@@ -216,7 +217,7 @@ static int __init apne_probe1(struct net_device *dev, int ioaddr)
 	outb(inb(ioaddr + NE_RESET), ioaddr + NE_RESET);
 
 	while ((inb(ioaddr + NE_EN0_ISR) & ENISR_RESET) == 0)
-		if (jiffies - reset_start_time > 2*HZ/100) {
+		if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
 			printk(" not found (no reset ack).\n");
 			return -ENODEV;
 		}
@@ -382,7 +383,7 @@ apne_reset_8390(struct net_device *dev)
 
     /* This check _should_not_ be necessary, omit eventually. */
     while ((inb(NE_BASE+NE_EN0_ISR) & ENISR_RESET) == 0)
-	if (jiffies - reset_start_time > 2*HZ/100) {
+	if (time_after(jiffies, reset_start_time + 2*HZ/100)) {
 	    printk("%s: ne_reset_8390() did not complete.\n", dev->name);
 	    break;
 	}
@@ -530,7 +531,7 @@ apne_block_output(struct net_device *dev, int count,
     dma_start = jiffies;
 
     while ((inb(NE_BASE + NE_EN0_ISR) & ENISR_RDC) == 0)
-	if (jiffies - dma_start > 2*HZ/100) {		/* 20ms */
+	if (time_after(jiffies, dma_start + 2*HZ/100)) {	/* 20ms */
 		printk("%s: timeout waiting for Tx RDC.\n", dev->name);
 		apne_reset_8390(dev);
 		NS8390_init(dev,1);

trunk/drivers/net/arcnet/arc-rawmode.c

@@ -42,7 +42,7 @@ static int build_header(struct sk_buff *skb, struct net_device *dev,
 static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
 		      int bufnum);
 
-struct ArcProto rawmode_proto =
+static struct ArcProto rawmode_proto =
 {
 	.suffix		= 'r',
 	.mtu		= XMTU,

trunk/drivers/net/arcnet/arcnet.c

@@ -52,6 +52,7 @@
 #include <net/arp.h>
 #include <linux/init.h>
 #include <linux/arcdevice.h>
+#include <linux/jiffies.h>
 
 /* "do nothing" functions for protocol drivers */
 static void null_rx(struct net_device *dev, int bufnum,
@@ -61,6 +62,7 @@ static int null_build_header(struct sk_buff *skb, struct net_device *dev,
 static int null_prepare_tx(struct net_device *dev, struct archdr *pkt,
 			   int length, int bufnum);
 
+static void arcnet_rx(struct net_device *dev, int bufnum);
 
 /*
  * one ArcProto per possible proto ID.  None of the elements of
@@ -71,7 +73,7 @@ static int null_prepare_tx(struct net_device *dev, struct archdr *pkt,
  struct ArcProto *arc_proto_map[256], *arc_proto_default,
    *arc_bcast_proto, *arc_raw_proto;
 
-struct ArcProto arc_proto_null =
+static struct ArcProto arc_proto_null =
 {
 	.suffix		= '?',
 	.mtu		= XMTU,
@@ -90,7 +92,6 @@ EXPORT_SYMBOL(arc_proto_map);
 EXPORT_SYMBOL(arc_proto_default);
 EXPORT_SYMBOL(arc_bcast_proto);
 EXPORT_SYMBOL(arc_raw_proto);
-EXPORT_SYMBOL(arc_proto_null);
 EXPORT_SYMBOL(arcnet_unregister_proto);
 EXPORT_SYMBOL(arcnet_debug);
 EXPORT_SYMBOL(alloc_arcdev);
@@ -118,7 +119,7 @@ static int __init arcnet_init(void)
 
 	arcnet_debug = debug;
 
-	printk(VERSION);
+	printk("arcnet loaded.\n");
 
 #ifdef ALPHA_WARNING
 	BUGLVL(D_EXTRA) {
@@ -178,8 +179,8 @@ EXPORT_SYMBOL(arcnet_dump_skb);
  * Dump the contents of an ARCnet buffer
  */
 #if (ARCNET_DEBUG_MAX & (D_RX | D_TX))
-void arcnet_dump_packet(struct net_device *dev, int bufnum, char *desc,
-			int take_arcnet_lock)
+static void arcnet_dump_packet(struct net_device *dev, int bufnum,
+			       char *desc, int take_arcnet_lock)
 {
 	struct arcnet_local *lp = dev->priv;
 	int i, length;
@@ -208,7 +209,10 @@ void arcnet_dump_packet(struct net_device *dev, int bufnum, char *desc,
 
 }
 
-EXPORT_SYMBOL(arcnet_dump_packet);
+#else
+
+#define arcnet_dump_packet(dev, bufnum, desc,take_arcnet_lock) do { } while (0)
+
 #endif
 
 
@@ -733,7 +737,7 @@ static void arcnet_timeout(struct net_device *dev)
 
 	spin_unlock_irqrestore(&lp->lock, flags);
 
-	if (jiffies - lp->last_timeout > 10*HZ) {
+	if (time_after(jiffies, lp->last_timeout + 10*HZ)) {
 		BUGMSG(D_EXTRA, "tx timed out%s (status=%Xh, intmask=%Xh, dest=%02Xh)\n",
 		       msg, status, lp->intmask, lp->lasttrans_dest);
 		lp->last_timeout = jiffies;
@@ -996,7 +1000,7 @@ irqreturn_t arcnet_interrupt(int irq, void *dev_id, struct pt_regs *regs)
  * This is a generic packet receiver that calls arcnet??_rx depending on the
  * protocol ID found.
  */
-void arcnet_rx(struct net_device *dev, int bufnum)
+static void arcnet_rx(struct net_device *dev, int bufnum)
 {
 	struct arcnet_local *lp = dev->priv;
 	struct archdr pkt;

trunk/drivers/net/arcnet/rfc1051.c

@@ -43,7 +43,7 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
 		      int bufnum);
 
 
-struct ArcProto rfc1051_proto =
+static struct ArcProto rfc1051_proto =
 {
 	.suffix		= 's',
 	.mtu		= XMTU - RFC1051_HDR_SIZE,

trunk/drivers/net/arcnet/rfc1201.c

@@ -43,7 +43,7 @@ static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
 		      int bufnum);
 static int continue_tx(struct net_device *dev, int bufnum);
 
-struct ArcProto rfc1201_proto =
+static struct ArcProto rfc1201_proto =
 {
 	.suffix		= 'a',
 	.mtu		= 1500,	/* could be more, but some receivers can't handle it... */

trunk/drivers/net/arm/etherh.c

@@ -46,6 +46,7 @@
 #include <linux/device.h>
 #include <linux/init.h>
 #include <linux/bitops.h>
+#include <linux/jiffies.h>
 
 #include <asm/system.h>
 #include <asm/ecard.h>
@@ -355,7 +356,7 @@ etherh_block_output (struct net_device *dev, int count, const unsigned char *buf
 	dma_start = jiffies;
 
 	while ((readb (addr + EN0_ISR) & ENISR_RDC) == 0)
-		if (jiffies - dma_start > 2*HZ/100) { /* 20ms */
+		if (time_after(jiffies, dma_start + 2*HZ/100)) { /* 20ms */
 			printk(KERN_ERR "%s: timeout waiting for TX RDC\n",
 				dev->name);
 			etherh_reset (dev);

trunk/drivers/net/eth16i.c

@@ -161,6 +161,7 @@ static char *version =
 #include <linux/etherdevice.h>
 #include <linux/skbuff.h>
 #include <linux/bitops.h>
+#include <linux/jiffies.h>
 
 #include <asm/system.h>		  
 #include <asm/io.h>		  
@@ -754,7 +755,7 @@ static void eth16i_set_port(int ioaddr, int porttype)
 
 static int eth16i_send_probe_packet(int ioaddr, unsigned char *b, int l)
 {
-	int starttime;
+	unsigned long starttime;
 
 	outb(0xff, ioaddr + TX_STATUS_REG);
 
@@ -765,7 +766,7 @@ static int eth16i_send_probe_packet(int ioaddr, unsigned char *b, int l)
 	outb(TX_START | 1, ioaddr + TRANSMIT_START_REG); 
 
 	while( (inb(ioaddr + TX_STATUS_REG) & 0x80) == 0) {
-		if( (jiffies - starttime) > TX_TIMEOUT) {
+		if( time_after(jiffies, starttime + TX_TIMEOUT)) {
 			return -1;
 		}
 	}
@@ -775,18 +776,18 @@ static int eth16i_send_probe_packet(int ioaddr, unsigned char *b, int l)
 
 static int eth16i_receive_probe_packet(int ioaddr)
 {
-	int starttime;
+	unsigned long starttime;
 
 	starttime = jiffies;
 
 	while((inb(ioaddr + TX_STATUS_REG) & 0x20) == 0) {
-		if( (jiffies - starttime) > TX_TIMEOUT) {
+		if( time_after(jiffies, starttime + TX_TIMEOUT)) {
 
 			if(eth16i_debug > 1)
 				printk(KERN_DEBUG "Timeout occurred waiting transmit packet received\n");
 			starttime = jiffies;
 			while((inb(ioaddr + RX_STATUS_REG) & 0x80) == 0) {
-				if( (jiffies - starttime) > TX_TIMEOUT) {
+				if( time_after(jiffies, starttime + TX_TIMEOUT)) {
 					if(eth16i_debug > 1)
 						printk(KERN_DEBUG "Timeout occurred waiting receive packet\n");
 					return -1;

trunk/drivers/net/hamradio/baycom_epp.c

@@ -905,7 +905,7 @@ static int epp_open(struct net_device *dev)
 	/* autoprobe baud rate */
 	tstart = jiffies;
 	i = 0;
-	while ((signed)(jiffies-tstart-HZ/3) < 0) {
+	while (time_before(jiffies, tstart + HZ/3)) {
 		if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
 			goto epptimeout;
 		if ((stat & (EPP_NRAEF|EPP_NRHF)) == EPP_NRHF) {

trunk/drivers/net/hp100.c

@@ -115,6 +115,7 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/bitops.h>
+#include <linux/jiffies.h>
 
 #include <asm/io.h>
 
@@ -1499,7 +1500,7 @@ static int hp100_start_xmit_bm(struct sk_buff *skb, struct net_device *dev)
 		printk("hp100: %s: start_xmit_bm: No TX PDL available.\n", dev->name);
 #endif
 		/* not waited long enough since last tx? */
-		if (jiffies - dev->trans_start < HZ)
+		if (time_before(jiffies, dev->trans_start + HZ))
 			return -EAGAIN;
 
 		if (hp100_check_lan(dev))
@@ -1652,7 +1653,7 @@ static int hp100_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		printk("hp100: %s: start_xmit: tx free mem = 0x%x\n", dev->name, i);
 #endif
 		/* not waited long enough since last failed tx try? */
-		if (jiffies - dev->trans_start < HZ) {
+		if (time_before(jiffies, dev->trans_start + HZ)) {
 #ifdef HP100_DEBUG
 			printk("hp100: %s: trans_start timing problem\n",
 			       dev->name);