---

yaml
---
r: 284531
b: refs/heads/master
c: a4924c7
h: refs/heads/master
i:
  284529: 9299f6d
  284527: dd009a2
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: ee5d19b20a711dca3848450979e3cd20b6b795cc
+refs/heads/master: a4924c71aa43d4f8a3f342b1f71788349472e684

trunk/drivers/mmc/core/bus.c

@@ -303,10 +303,11 @@ int mmc_add_card(struct mmc_card *card)
 			mmc_card_ddr_mode(card) ? "DDR " : "",
 			type);
 	} else {
-		printk(KERN_INFO "%s: new %s%s%s card at address %04x\n",
+		pr_info("%s: new %s%s%s%s card at address %04x\n",
 			mmc_hostname(card->host),
 			mmc_card_uhs(card) ? "ultra high speed " :
 			(mmc_card_highspeed(card) ? "high speed " : ""),
+			(mmc_card_hs200(card) ? "HS200 " : ""),
 			mmc_card_ddr_mode(card) ? "DDR " : "",
 			type, card->rca);
 	}

trunk/drivers/mmc/core/debugfs.c

@@ -135,6 +135,9 @@ static int mmc_ios_show(struct seq_file *s, void *data)
 	case MMC_TIMING_UHS_DDR50:
 		str = "sd uhs DDR50";
 		break;
+	case MMC_TIMING_MMC_HS200:
+		str = "mmc high-speed SDR200";
+		break;
 	default:
 		str = "invalid";
 		break;

trunk/drivers/mmc/core/mmc.c

@@ -286,6 +286,27 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
 	}
 	card->ext_csd.raw_card_type = ext_csd[EXT_CSD_CARD_TYPE];
 	switch (ext_csd[EXT_CSD_CARD_TYPE] & EXT_CSD_CARD_TYPE_MASK) {
+	case EXT_CSD_CARD_TYPE_SDR_ALL:
+	case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_8V:
+	case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_1_2V:
+	case EXT_CSD_CARD_TYPE_SDR_ALL_DDR_52:
+		card->ext_csd.hs_max_dtr = 200000000;
+		card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_200;
+		break;
+	case EXT_CSD_CARD_TYPE_SDR_1_2V_ALL:
+	case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_8V:
+	case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_1_2V:
+	case EXT_CSD_CARD_TYPE_SDR_1_2V_DDR_52:
+		card->ext_csd.hs_max_dtr = 200000000;
+		card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_1_2V;
+		break;
+	case EXT_CSD_CARD_TYPE_SDR_1_8V_ALL:
+	case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_8V:
+	case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_1_2V:
+	case EXT_CSD_CARD_TYPE_SDR_1_8V_DDR_52:
+		card->ext_csd.hs_max_dtr = 200000000;
+		card->ext_csd.card_type = EXT_CSD_CARD_TYPE_SDR_1_8V;
+		break;
 	case EXT_CSD_CARD_TYPE_DDR_52 | EXT_CSD_CARD_TYPE_52 |
 	     EXT_CSD_CARD_TYPE_26:
 		card->ext_csd.hs_max_dtr = 52000000;
@@ -699,6 +720,79 @@ static int mmc_select_powerclass(struct mmc_card *card,
 	return err;
 }
 
+/*
+ * Selects the desired buswidth and switch to the HS200 mode
+ * if bus width set without error
+ */
+static int mmc_select_hs200(struct mmc_card *card)
+{
+	int idx, err = 0;
+	struct mmc_host *host;
+	static unsigned ext_csd_bits[] = {
+		EXT_CSD_BUS_WIDTH_4,
+		EXT_CSD_BUS_WIDTH_8,
+	};
+	static unsigned bus_widths[] = {
+		MMC_BUS_WIDTH_4,
+		MMC_BUS_WIDTH_8,
+	};
+
+	BUG_ON(!card);
+
+	host = card->host;
+
+	if (card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_2V &&
+	    host->caps2 & MMC_CAP2_HS200_1_2V_SDR)
+		if (mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120, 0))
+			err = mmc_set_signal_voltage(host,
+						     MMC_SIGNAL_VOLTAGE_180, 0);
+
+	/* If fails try again during next card power cycle */
+	if (err)
+		goto err;
+
+	idx = (host->caps & MMC_CAP_8_BIT_DATA) ? 1 : 0;
+
+	/*
+	 * Unlike SD, MMC cards dont have a configuration register to notify
+	 * supported bus width. So bus test command should be run to identify
+	 * the supported bus width or compare the ext csd values of current
+	 * bus width and ext csd values of 1 bit mode read earlier.
+	 */
+	for (; idx >= 0; idx--) {
+
+		/*
+		 * Host is capable of 8bit transfer, then switch
+		 * the device to work in 8bit transfer mode. If the
+		 * mmc switch command returns error then switch to
+		 * 4bit transfer mode. On success set the corresponding
+		 * bus width on the host.
+		 */
+		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+				 EXT_CSD_BUS_WIDTH,
+				 ext_csd_bits[idx],
+				 card->ext_csd.generic_cmd6_time);
+		if (err)
+			continue;
+
+		mmc_set_bus_width(card->host, bus_widths[idx]);
+
+		if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST))
+			err = mmc_compare_ext_csds(card, bus_widths[idx]);
+		else
+			err = mmc_bus_test(card, bus_widths[idx]);
+		if (!err)
+			break;
+	}
+
+	/* switch to HS200 mode if bus width set successfully */
+	if (!err)
+		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+				 EXT_CSD_HS_TIMING, 2, 0);
+err:
+	return err;
+}
+
 /*
  * Handle the detection and initialisation of a card.
  *
@@ -905,11 +999,15 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	/*
 	 * Activate high speed (if supported)
 	 */
-	if ((card->ext_csd.hs_max_dtr != 0) &&
-		(host->caps & MMC_CAP_MMC_HIGHSPEED)) {
-		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-				 EXT_CSD_HS_TIMING, 1,
-				 card->ext_csd.generic_cmd6_time);
+	if (card->ext_csd.hs_max_dtr != 0) {
+		err = 0;
+		if (card->ext_csd.hs_max_dtr > 52000000 &&
+		    host->caps2 & MMC_CAP2_HS200)
+			err = mmc_select_hs200(card);
+		else if	(host->caps & MMC_CAP_MMC_HIGHSPEED)
+			err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+					 EXT_CSD_HS_TIMING, 1, 0);
+
 		if (err && err != -EBADMSG)
 			goto free_card;
 
@@ -918,8 +1016,15 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 			       mmc_hostname(card->host));
 			err = 0;
 		} else {
-			mmc_card_set_highspeed(card);
-			mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
+			if (card->ext_csd.hs_max_dtr > 52000000 &&
+			    host->caps2 & MMC_CAP2_HS200) {
+				mmc_card_set_hs200(card);
+				mmc_set_timing(card->host,
+					       MMC_TIMING_MMC_HS200);
+			} else {
+				mmc_card_set_highspeed(card);
+				mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
+			}
 		}
 	}
 
@@ -944,7 +1049,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	 */
 	max_dtr = (unsigned int)-1;
 
-	if (mmc_card_highspeed(card)) {
+	if (mmc_card_highspeed(card) || mmc_card_hs200(card)) {
 		if (max_dtr > card->ext_csd.hs_max_dtr)
 			max_dtr = card->ext_csd.hs_max_dtr;
 	} else if (max_dtr > card->csd.max_dtr) {
@@ -969,10 +1074,49 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 				ddr = MMC_1_2V_DDR_MODE;
 	}
 
+	/*
+	 * Indicate HS200 SDR mode (if supported).
+	 */
+	if (mmc_card_hs200(card)) {
+		u32 ext_csd_bits;
+		u32 bus_width = card->host->ios.bus_width;
+
+		/*
+		 * For devices supporting HS200 mode, the bus width has
+		 * to be set before executing the tuning function. If
+		 * set before tuning, then device will respond with CRC
+		 * errors for responses on CMD line. So for HS200 the
+		 * sequence will be
+		 * 1. set bus width 4bit / 8 bit (1 bit not supported)
+		 * 2. switch to HS200 mode
+		 * 3. set the clock to > 52Mhz <=200MHz and
+		 * 4. execute tuning for HS200
+		 */
+		if ((host->caps2 & MMC_CAP2_HS200) &&
+		    card->host->ops->execute_tuning)
+			err = card->host->ops->execute_tuning(card->host,
+				MMC_SEND_TUNING_BLOCK_HS200);
+		if (err) {
+			pr_warning("%s: tuning execution failed\n",
+				   mmc_hostname(card->host));
+			goto err;
+		}
+
+		ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ?
+				EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4;
+		err = mmc_select_powerclass(card, ext_csd_bits, ext_csd);
+		if (err) {
+			pr_err("%s: power class selection to bus width %d failed\n",
+				mmc_hostname(card->host), 1 << bus_width);
+			goto err;
+		}
+	}
+
 	/*
 	 * Activate wide bus and DDR (if supported).
 	 */
-	if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
+	if (!mmc_card_hs200(card) &&
+	    (card->csd.mmca_vsn >= CSD_SPEC_VER_3) &&
 	    (host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) {
 		static unsigned ext_csd_bits[][2] = {
 			{ EXT_CSD_BUS_WIDTH_8, EXT_CSD_DDR_BUS_WIDTH_8 },

trunk/drivers/mmc/core/sd.c

@@ -661,7 +661,8 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card)
 
 	/* SPI mode doesn't define CMD19 */
 	if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning)
-		err = card->host->ops->execute_tuning(card->host);
+		err = card->host->ops->execute_tuning(card->host,
+						      MMC_SEND_TUNING_BLOCK);
 
 out:
 	kfree(status);

trunk/drivers/mmc/core/sdio.c

@@ -14,6 +14,7 @@
 
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
+#include <linux/mmc/mmc.h>
 #include <linux/mmc/sdio.h>
 #include <linux/mmc/sdio_func.h>
 #include <linux/mmc/sdio_ids.h>
@@ -556,7 +557,8 @@ static int mmc_sdio_init_uhs_card(struct mmc_card *card)
 
 	/* Initialize and start re-tuning timer */
 	if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning)
-		err = card->host->ops->execute_tuning(card->host);
+		err = card->host->ops->execute_tuning(card->host,
+						      MMC_SEND_TUNING_BLOCK);
 
 out:
 

trunk/include/linux/mmc/card.h

@@ -216,6 +216,7 @@ struct mmc_card {
 #define MMC_STATE_ULTRAHIGHSPEED (1<<5)		/* card is in ultra high speed mode */
 #define MMC_CARD_SDXC		(1<<6)		/* card is SDXC */
 #define MMC_CARD_REMOVED	(1<<7)		/* card has been removed */
+#define MMC_STATE_HIGHSPEED_200	(1<<8)		/* card is in HS200 mode */
 	unsigned int		quirks; 	/* card quirks */
 #define MMC_QUIRK_LENIENT_FN0	(1<<0)		/* allow SDIO FN0 writes outside of the VS CCCR range */
 #define MMC_QUIRK_BLKSZ_FOR_BYTE_MODE (1<<1)	/* use func->cur_blksize */
@@ -374,6 +375,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data)
 #define mmc_card_present(c)	((c)->state & MMC_STATE_PRESENT)
 #define mmc_card_readonly(c)	((c)->state & MMC_STATE_READONLY)
 #define mmc_card_highspeed(c)	((c)->state & MMC_STATE_HIGHSPEED)
+#define mmc_card_hs200(c)	((c)->state & MMC_STATE_HIGHSPEED_200)
 #define mmc_card_blockaddr(c)	((c)->state & MMC_STATE_BLOCKADDR)
 #define mmc_card_ddr_mode(c)	((c)->state & MMC_STATE_HIGHSPEED_DDR)
 #define mmc_card_uhs(c)		((c)->state & MMC_STATE_ULTRAHIGHSPEED)
@@ -384,6 +386,7 @@ static inline void __maybe_unused remove_quirk(struct mmc_card *card, int data)
 #define mmc_card_set_present(c)	((c)->state |= MMC_STATE_PRESENT)
 #define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
 #define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED)
+#define mmc_card_set_hs200(c)	((c)->state |= MMC_STATE_HIGHSPEED_200)
 #define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR)
 #define mmc_card_set_ddr_mode(c) ((c)->state |= MMC_STATE_HIGHSPEED_DDR)
 #define mmc_card_set_uhs(c) ((c)->state |= MMC_STATE_ULTRAHIGHSPEED)

trunk/include/linux/mmc/host.h

@@ -56,10 +56,13 @@ struct mmc_ios {
 #define MMC_TIMING_UHS_SDR50	3
 #define MMC_TIMING_UHS_SDR104	4
 #define MMC_TIMING_UHS_DDR50	5
+#define MMC_TIMING_MMC_HS200	6
 
 #define MMC_SDR_MODE		0
 #define MMC_1_2V_DDR_MODE	1
 #define MMC_1_8V_DDR_MODE	2
+#define MMC_1_2V_SDR_MODE	3
+#define MMC_1_8V_SDR_MODE	4
 
 	unsigned char	signal_voltage;		/* signalling voltage (1.8V or 3.3V) */
 
@@ -148,7 +151,9 @@ struct mmc_host_ops {
 	void	(*init_card)(struct mmc_host *host, struct mmc_card *card);
 
 	int	(*start_signal_voltage_switch)(struct mmc_host *host, struct mmc_ios *ios);
-	int	(*execute_tuning)(struct mmc_host *host);
+
+	/* The tuning command opcode value is different for SD and eMMC cards */
+	int	(*execute_tuning)(struct mmc_host *host, u32 opcode);
 	void	(*enable_preset_value)(struct mmc_host *host, bool enable);
 	int	(*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv);
 	void	(*hw_reset)(struct mmc_host *host);
@@ -248,6 +253,10 @@ struct mmc_host {
 #define MMC_CAP2_POWEROFF_NOTIFY (1 << 2)	/* Notify poweroff supported */
 #define MMC_CAP2_NO_MULTI_READ	(1 << 3)	/* Multiblock reads don't work */
 #define MMC_CAP2_NO_SLEEP_CMD	(1 << 4)	/* Don't allow sleep command */
+#define MMC_CAP2_HS200_1_8V_SDR	(1 << 5)        /* can support */
+#define MMC_CAP2_HS200_1_2V_SDR	(1 << 6)        /* can support */
+#define MMC_CAP2_HS200		(MMC_CAP2_HS200_1_8V_SDR | \
+				 MMC_CAP2_HS200_1_2V_SDR)
 
 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
 	unsigned int        power_notify_type;