---

yaml --- r: 233165 b: refs/heads/master c: 7e90d70 h: refs/heads/master i: 233163: cb55bb1 v: v3
git-mirror · Feb 8, 2011 · 542d100 · 542d100
1 parent ef5a763
commit 542d100
Show file tree

Hide file tree

Showing 143 changed files with 534 additions and 986 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 68c3d4b26623e92656588061405d9dbdf97c0706
+refs/heads/master: 7e90d705fc9f8c5e3a1549281dce0654d049243b
diff --git a/trunk/arch/arm/mach-s5pv310/Kconfig b/trunk/arch/arm/mach-s5pv310/Kconfig
@@ -122,7 +122,6 @@ config MACH_SMDKV310
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
 	select S5PV310_DEV_PD
-	select S5PV310_DEV_SYSMMU
 	select S5PV310_SETUP_I2C1
 	select S5PV310_SETUP_SDHCI
 	help

diff --git a/trunk/arch/arm/mach-s5pv310/include/mach/map.h b/trunk/arch/arm/mach-s5pv310/include/mach/map.h
@@ -124,6 +124,8 @@
 #define S5PV310_PA_SYSMMU_TV		0x12E20000
 #define S5PV310_PA_SYSMMU_MFC_L		0x13620000
 #define S5PV310_PA_SYSMMU_MFC_R		0x13630000
+#define S5PV310_SYSMMU_TOTAL_IPNUM	16
+#define S5P_SYSMMU_TOTAL_IPNUM		S5PV310_SYSMMU_TOTAL_IPNUM
 
 /* compatibiltiy defines. */
 #define S3C_PA_UART			S5PV310_PA_UART

diff --git a/trunk/arch/arm/mach-s5pv310/include/mach/sysmmu.h b/trunk/arch/arm/mach-s5pv310/include/mach/sysmmu.h
@@ -13,9 +13,6 @@
 #ifndef __ASM_ARM_ARCH_SYSMMU_H
 #define __ASM_ARM_ARCH_SYSMMU_H __FILE__
 
-#define S5PV310_SYSMMU_TOTAL_IPNUM	16
-#define S5P_SYSMMU_TOTAL_IPNUM		S5PV310_SYSMMU_TOTAL_IPNUM
-
 enum s5pv310_sysmmu_ips {
 	SYSMMU_MDMA,
 	SYSMMU_SSS,
@@ -35,7 +32,7 @@ enum s5pv310_sysmmu_ips {
 	SYSMMU_MFC_R,
 };
 
-static char *sysmmu_ips_name[S5PV310_SYSMMU_TOTAL_IPNUM] = {
+static char *sysmmu_ips_name[S5P_SYSMMU_TOTAL_IPNUM] = {
 	"SYSMMU_MDMA"	,
 	"SYSMMU_SSS"	,
 	"SYSMMU_FIMC0"	,

diff --git a/trunk/arch/arm/plat-s5p/Kconfig b/trunk/arch/arm/plat-s5p/Kconfig
@@ -37,14 +37,6 @@ config S5P_GPIO_INT
 	help
 	  Common code for the GPIO interrupts (other than external interrupts.)
 
-comment "System MMU"
-
-config S5P_SYSTEM_MMU
-	bool "S5P SYSTEM MMU"
-	depends on ARCH_S5PV310
-	help
-	  Say Y here if you want to enable System MMU
-
 config S5P_DEV_FIMC0
 	bool
 	help
@@ -74,3 +66,19 @@ config S5P_DEV_CSIS1
 	bool
 	help
 	  Compile in platform device definitions for MIPI-CSIS channel 1
+
+menuconfig S5P_SYSMMU
+	bool "SYSMMU support"
+	depends on ARCH_S5PV310
+	help
+	  This is a System MMU driver for Samsung ARM based Soc.
+
+if S5P_SYSMMU
+
+config S5P_SYSMMU_DEBUG
+	bool "Enables debug messages"
+	depends on S5P_SYSMMU
+	help
+	  This enables SYSMMU driver debug massages.
+
+endif
diff --git a/trunk/arch/arm/plat-s5p/Makefile b/trunk/arch/arm/plat-s5p/Makefile
@@ -19,7 +19,6 @@ obj-y				+= clock.o
 obj-y				+= irq.o
 obj-$(CONFIG_S5P_EXT_INT)	+= irq-eint.o
 obj-$(CONFIG_S5P_GPIO_INT)	+= irq-gpioint.o
-obj-$(CONFIG_S5P_SYSTEM_MMU)	+= sysmmu.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= irq-pm.o
 
@@ -31,3 +30,4 @@ obj-$(CONFIG_S5P_DEV_FIMC2)	+= dev-fimc2.o
 obj-$(CONFIG_S5P_DEV_ONENAND)	+= dev-onenand.o
 obj-$(CONFIG_S5P_DEV_CSIS0)	+= dev-csis0.o
 obj-$(CONFIG_S5P_DEV_CSIS1)	+= dev-csis1.o
+obj-$(CONFIG_S5P_SYSMMU)	+= sysmmu.o
diff --git a/trunk/arch/arm/plat-s5p/include/plat/sysmmu.h b/trunk/arch/arm/plat-s5p/include/plat/sysmmu.h
@@ -0,0 +1,23 @@
+/* linux/arch/arm/plat-s5p/include/plat/sysmmu.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * Samsung sysmmu driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_S5P_SYSMMU_H
+#define __ASM_PLAT_S5P_SYSMMU_H __FILE__
+
+/* debug macro */
+#ifdef CONFIG_S5P_SYSMMU_DEBUG
+#define sysmmu_debug(fmt, arg...)	printk(KERN_INFO "[%s] " fmt, __func__, ## arg)
+#else
+#define sysmmu_debug(fmt, arg...)	do { } while (0)
+#endif
+
+#endif /* __ASM_PLAT_S5P_SYSMMU_H */
diff --git a/trunk/arch/arm/plat-s5p/sysmmu.c b/trunk/arch/arm/plat-s5p/sysmmu.c
@@ -16,6 +16,8 @@
 #include <mach/regs-sysmmu.h>
 #include <mach/sysmmu.h>
 
+#include <plat/sysmmu.h>
+
 struct sysmmu_controller s5p_sysmmu_cntlrs[S5P_SYSMMU_TOTAL_IPNUM];
 
 void s5p_sysmmu_register(struct sysmmu_controller *sysmmuconp)
@@ -121,7 +123,7 @@ static int s5p_sysmmu_set_tablebase(sysmmu_ips ips)
 		: "=r" (pg) : : "cc");		\
 		pg &= ~0x3fff;
 
-	printk(KERN_INFO "%s: CP15 TTBR0 : 0x%x\n", __func__, pg);
+	sysmmu_debug("CP15 TTBR0 : 0x%x\n", pg);
 
 	/* Set sysmmu page table base address */
 	__raw_writel(pg, sysmmuconp->regs + S5P_PT_BASE_ADDR);

diff --git a/trunk/arch/arm/plat-samsung/include/plat/pm.h b/trunk/arch/arm/plat-samsung/include/plat/pm.h
@@ -17,8 +17,6 @@
 
 #include <linux/irq.h>
 
-struct sys_device;
-
 #ifdef CONFIG_PM
 
 extern __init int s3c_pm_init(void);

diff --git a/trunk/arch/blackfin/include/asm/bfin_serial.h b/trunk/arch/blackfin/include/asm/bfin_serial.h
@@ -10,7 +10,6 @@
 #define __BFIN_ASM_SERIAL_H__
 
 #include <linux/serial_core.h>
-#include <linux/spinlock.h>
 #include <mach/anomaly.h>
 #include <mach/bfin_serial.h>
 
@@ -42,7 +41,6 @@ struct bfin_serial_port {
 	struct circ_buf rx_dma_buf;
 	struct timer_list rx_dma_timer;
 	int rx_dma_nrows;
-	spinlock_t rx_lock;
 	unsigned int tx_dma_channel;
 	unsigned int rx_dma_channel;
 	struct work_struct tx_dma_workqueue;

diff --git a/trunk/arch/microblaze/include/asm/irqflags.h b/trunk/arch/microblaze/include/asm/irqflags.h
@@ -12,7 +12,7 @@
 #include <linux/types.h>
 #include <asm/registers.h>
 
-#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+#ifdef CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
 
 static inline unsigned long arch_local_irq_save(void)
 {

diff --git a/trunk/arch/microblaze/include/asm/pgtable.h b/trunk/arch/microblaze/include/asm/pgtable.h
@@ -411,19 +411,20 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 static inline unsigned long pte_update(pte_t *p, unsigned long clr,
 				unsigned long set)
 {
-	unsigned long flags, old, tmp;
-
-	raw_local_irq_save(flags);
-
-	__asm__ __volatile__(	"lw	%0, %2, r0	\n"
-				"andn	%1, %0, %3	\n"
-				"or	%1, %1, %4	\n"
-				"sw	%1, %2, r0	\n"
-			: "=&r" (old), "=&r" (tmp)
-			: "r" ((unsigned long)(p + 1) - 4), "r" (clr), "r" (set)
-			: "cc");
-
-	raw_local_irq_restore(flags);
+	unsigned long old, tmp, msr;
+
+	__asm__ __volatile__("\
+	msrclr	%2, 0x2\n\
+	nop\n\
+	lw	%0, %4, r0\n\
+	andn	%1, %0, %5\n\
+	or	%1, %1, %6\n\
+	sw	%1, %4, r0\n\
+	mts     rmsr, %2\n\
+	nop"
+	: "=&r" (old), "=&r" (tmp), "=&r" (msr), "=m" (*p)
+	: "r" ((unsigned long)(p + 1) - 4), "r" (clr), "r" (set), "m" (*p)
+	: "cc");
 
 	return old;
 }

diff --git a/trunk/arch/microblaze/kernel/cpu/pvr.c b/trunk/arch/microblaze/kernel/cpu/pvr.c
@@ -27,7 +27,7 @@
 	register unsigned tmp __asm__("r3");			\
 	tmp = 0x0;	/* Prevent warning about unused */	\
 	__asm__ __volatile__ (					\
-			"mfs	%0, rpvr" #pvrid ";"		\
+			"mfs	%0, rpvr" #pvrid ";"	\
 			: "=r" (tmp) : : "memory"); 		\
 	val = tmp;						\
 }
@@ -54,7 +54,7 @@ int cpu_has_pvr(void)
 	if (!(flags & PVR_MSR_BIT))
 		return 0;
 
-	get_single_pvr(0, pvr0);
+	get_single_pvr(0x00, pvr0);
 	pr_debug("%s: pvr0 is 0x%08x\n", __func__, pvr0);
 
 	if (pvr0 & PVR0_PVR_FULL_MASK)

diff --git a/trunk/arch/microblaze/kernel/head.S b/trunk/arch/microblaze/kernel/head.S
@@ -62,14 +62,15 @@ real_start:
 	andi	r1, r1, ~2
 	mts	rmsr, r1
 /*
- * According to Xilinx, msrclr instruction behaves like 'mfs rX,rpc'
- * if the msrclr instruction is not enabled. We use this to detect
- * if the opcode is available, by issuing msrclr and then testing the result.
- * r8 == 0 - msr instructions are implemented
- * r8 != 0 - msr instructions are not implemented
+ * Here is checking mechanism which check if Microblaze has msr instructions
+ * We load msr and compare it with previous r1 value - if is the same,
+ * msr instructions works if not - cpu don't have them.
  */
-	msrclr	r8, 0 /* clear nothing - just read msr for test */
-	cmpu	r8, r8, r1 /* r1 must contain msr reg content */
+	/* r8=0 - I have msr instr, 1 - I don't have them */
+	rsubi	r0, r0, 1	/* set the carry bit */
+	msrclr	r0, 0x4		/* try to clear it */
+	/* read the carry bit, r8 will be '0' if msrclr exists */
+	addik	r8, r0, 0
 
 /* r7 may point to an FDT, or there may be one linked in.
    if it's in r7, we've got to save it away ASAP.

diff --git a/trunk/arch/microblaze/kernel/setup.c b/trunk/arch/microblaze/kernel/setup.c
@@ -161,11 +161,11 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
 #if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
 	if (msr)
 		eprintk("!!!Your kernel has setup MSR instruction but "
-				"CPU don't have it %x\n", msr);
+				"CPU don't have it %d\n", msr);
 #else
 	if (!msr)
 		eprintk("!!!Your kernel not setup MSR instruction but "
-				"CPU have it %x\n", msr);
+				"CPU have it %d\n", msr);
 #endif
 
 	for (src = __ivt_start; src < __ivt_end; src++, dst++)

diff --git a/trunk/block/blk-throttle.c b/trunk/block/blk-throttle.c
@@ -168,15 +168,7 @@ static struct throtl_grp * throtl_find_alloc_tg(struct throtl_data *td,
 	 * tree of blkg (instead of traversing through hash list all
 	 * the time.
 	 */
-
-	/*
-	 * This is the common case when there are no blkio cgroups.
- 	 * Avoid lookup in this case
- 	 */
-	if (blkcg == &blkio_root_cgroup)
-		tg = &td->root_tg;
-	else
-		tg = tg_of_blkg(blkiocg_lookup_group(blkcg, key));
+	tg = tg_of_blkg(blkiocg_lookup_group(blkcg, key));
 
 	/* Fill in device details for root group */
 	if (tg && !tg->blkg.dev && bdi->dev && dev_name(bdi->dev)) {

diff --git a/trunk/block/cfq-iosched.c b/trunk/block/cfq-iosched.c
@@ -599,7 +599,7 @@ cfq_group_slice(struct cfq_data *cfqd, struct cfq_group *cfqg)
 }
 
 static inline unsigned
-cfq_scaled_cfqq_slice(struct cfq_data *cfqd, struct cfq_queue *cfqq)
+cfq_scaled_group_slice(struct cfq_data *cfqd, struct cfq_queue *cfqq)
 {
 	unsigned slice = cfq_prio_to_slice(cfqd, cfqq);
 	if (cfqd->cfq_latency) {
@@ -631,7 +631,7 @@ cfq_scaled_cfqq_slice(struct cfq_data *cfqd, struct cfq_queue *cfqq)
 static inline void
 cfq_set_prio_slice(struct cfq_data *cfqd, struct cfq_queue *cfqq)
 {
-	unsigned slice = cfq_scaled_cfqq_slice(cfqd, cfqq);
+	unsigned slice = cfq_scaled_group_slice(cfqd, cfqq);
 
 	cfqq->slice_start = jiffies;
 	cfqq->slice_end = jiffies + slice;
@@ -1671,7 +1671,7 @@ __cfq_slice_expired(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 	 */
 	if (timed_out) {
 		if (cfq_cfqq_slice_new(cfqq))
-			cfqq->slice_resid = cfq_scaled_cfqq_slice(cfqd, cfqq);
+			cfqq->slice_resid = cfq_scaled_group_slice(cfqd, cfqq);
 		else
 			cfqq->slice_resid = cfqq->slice_end - jiffies;
 		cfq_log_cfqq(cfqd, cfqq, "resid=%ld", cfqq->slice_resid);
@@ -3432,10 +3432,6 @@ static bool cfq_should_wait_busy(struct cfq_data *cfqd, struct cfq_queue *cfqq)
 {
 	struct cfq_io_context *cic = cfqd->active_cic;
 
-	/* If the queue already has requests, don't wait */
-	if (!RB_EMPTY_ROOT(&cfqq->sort_list))
-		return false;
-
 	/* If there are other queues in the group, don't wait */
 	if (cfqq->cfqg->nr_cfqq > 1)
 		return false;

diff --git a/trunk/drivers/block/Makefile b/trunk/drivers/block/Makefile
@@ -39,4 +39,4 @@ obj-$(CONFIG_XEN_BLKDEV_FRONTEND)	+= xen-blkfront.o
 obj-$(CONFIG_BLK_DEV_DRBD)     += drbd/
 obj-$(CONFIG_BLK_DEV_RBD)     += rbd.o
 
-swim_mod-y	:= swim.o swim_asm.o
+swim_mod-objs	:= swim.o swim_asm.o
diff --git a/trunk/drivers/block/aoe/Makefile b/trunk/drivers/block/aoe/Makefile
@@ -3,4 +3,4 @@
 #
 
 obj-$(CONFIG_ATA_OVER_ETH)	+= aoe.o
-aoe-y := aoeblk.o aoechr.o aoecmd.o aoedev.o aoemain.o aoenet.o
+aoe-objs := aoeblk.o aoechr.o aoecmd.o aoedev.o aoemain.o aoenet.o
diff --git a/trunk/drivers/block/cciss.c b/trunk/drivers/block/cciss.c
@@ -2833,7 +2833,7 @@ static int cciss_revalidate(struct gendisk *disk)
 	sector_t total_size;
 	InquiryData_struct *inq_buff = NULL;
 
-	for (logvol = 0; logvol <= h->highest_lun; logvol++) {
+	for (logvol = 0; logvol < CISS_MAX_LUN; logvol++) {
 		if (!h->drv[logvol])
 			continue;
 		if (memcmp(h->drv[logvol]->LunID, drv->LunID,

diff --git a/trunk/drivers/block/loop.c b/trunk/drivers/block/loop.c
@@ -1641,9 +1641,6 @@ static struct loop_device *loop_alloc(int i)
 
 static void loop_free(struct loop_device *lo)
 {
-	if (!lo->lo_queue->queue_lock)
-		lo->lo_queue->queue_lock = &lo->lo_queue->__queue_lock;
-
 	blk_cleanup_queue(lo->lo_queue);
 	put_disk(lo->lo_disk);
 	list_del(&lo->lo_list);

diff --git a/trunk/drivers/block/nbd.c b/trunk/drivers/block/nbd.c
@@ -53,6 +53,7 @@
 #define DBG_BLKDEV      0x0100
 #define DBG_RX          0x0200
 #define DBG_TX          0x0400
+static DEFINE_MUTEX(nbd_mutex);
 static unsigned int debugflags;
 #endif /* NDEBUG */
 
@@ -717,9 +718,11 @@ static int nbd_ioctl(struct block_device *bdev, fmode_t mode,
 	dprintk(DBG_IOCTL, "%s: nbd_ioctl cmd=%s(0x%x) arg=%lu\n",
 			lo->disk->disk_name, ioctl_cmd_to_ascii(cmd), cmd, arg);
 
+	mutex_lock(&nbd_mutex);
 	mutex_lock(&lo->tx_lock);
 	error = __nbd_ioctl(bdev, lo, cmd, arg);
 	mutex_unlock(&lo->tx_lock);
+	mutex_unlock(&nbd_mutex);
 
 	return error;
 }

diff --git a/trunk/drivers/cdrom/cdrom.c b/trunk/drivers/cdrom/cdrom.c
@@ -409,8 +409,7 @@ int register_cdrom(struct cdrom_device_info *cdi)
 	}
 
 	ENSURE(drive_status, CDC_DRIVE_STATUS );
-	if (cdo->check_events == NULL && cdo->media_changed == NULL)
-		*change_capability = ~(CDC_MEDIA_CHANGED | CDC_SELECT_DISC);
+	ENSURE(media_changed, CDC_MEDIA_CHANGED);
 	ENSURE(tray_move, CDC_CLOSE_TRAY | CDC_OPEN_TRAY);
 	ENSURE(lock_door, CDC_LOCK);
 	ENSURE(select_speed, CDC_SELECT_SPEED);

diff --git a/trunk/drivers/char/Makefile b/trunk/drivers/char/Makefile
@@ -30,7 +30,6 @@ obj-$(CONFIG_SYNCLINK_GT)	+= synclink_gt.o
 obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o
 obj-$(CONFIG_SX)		+= sx.o generic_serial.o
 obj-$(CONFIG_RIO)		+= rio/ generic_serial.o
-obj-$(CONFIG_VIRTIO_CONSOLE)	+= virtio_console.o
 obj-$(CONFIG_RAW_DRIVER)	+= raw.o
 obj-$(CONFIG_SGI_SNSC)		+= snsc.o snsc_event.o
 obj-$(CONFIG_MSPEC)		+= mspec.o