[PPC] Remove mpc8272 ads board from arch/ppc

We have a board port in arch/powerpc so we dont need this one anymore.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

arch/ppc/8260_io/fcc_enet.c

@@ -165,23 +165,15 @@ static int fcc_enet_set_mac_address(struct net_device *dev, void *addr);
 #ifdef CONFIG_SBC82xx
 #define F1_RXCLK	9
 #define F1_TXCLK	10
-#elif defined(CONFIG_ADS8272)
-#define F1_RXCLK	11
-#define F1_TXCLK	10
 #else
 #define F1_RXCLK	12
 #define F1_TXCLK	11
 #endif
 
 /* FCC2 Clock Source Configuration.  There are board specific.
    Can only choose from CLK13-16 */
-#ifdef CONFIG_ADS8272
-#define F2_RXCLK	15
-#define F2_TXCLK	16
-#else
 #define F2_RXCLK	13
 #define F2_TXCLK	14
-#endif
 
 /* FCC3 Clock Source Configuration.  There are board specific.
    Can only choose from CLK13-16 */
@@ -289,10 +281,7 @@ static int fcc_enet_set_mac_address(struct net_device *dev, void *addr);
 /* TQM8260 has MDIO and MDCK on PC30 and PC31 respectively */
 #define PC_MDIO		((uint)0x00000002)
 #define PC_MDCK		((uint)0x00000001)
-#elif defined(CONFIG_ADS8272)
-#define PC_MDIO		((uint)0x00002000)
-#define PC_MDCK		((uint)0x00001000)
-#elif defined(CONFIG_EST8260) || defined(CONFIG_ADS8260) || defined(CONFIG_PQ2FADS)
+#elif defined(CONFIG_EST8260) || defined(CONFIG_ADS8260)
 #define PC_MDIO		((uint)0x00400000)
 #define PC_MDCK		((uint)0x00200000)
 #else
@@ -2118,11 +2107,6 @@ init_fcc_startup(fcc_info_t *fip, struct net_device *dev)
 		printk("Can't get FCC IRQ %d\n", fip->fc_interrupt);
 
 #ifdef	PHY_INTERRUPT
-#ifdef CONFIG_ADS8272
-	if (request_irq(PHY_INTERRUPT, mii_link_interrupt, IRQF_SHARED,
-				"mii", dev) < 0)
-		printk(KERN_CRIT "Can't get MII IRQ %d\n", PHY_INTERRUPT);
-#else
 	/* Make IRQn edge triggered.  This does not work if PHY_INTERRUPT is
 	 * on Port C.
 	 */
@@ -2132,7 +2116,6 @@ init_fcc_startup(fcc_info_t *fip, struct net_device *dev)
 	if (request_irq(PHY_INTERRUPT, mii_link_interrupt, 0,
 							"mii", dev) < 0)
 		printk(KERN_CRIT "Can't get MII IRQ %d\n", PHY_INTERRUPT);
-#endif
 #endif	/* PHY_INTERRUPT */
 
 	/* Set GFMR to enable Ethernet operating mode.

arch/ppc/Kconfig

@@ -666,9 +666,6 @@ config TQM8260
 	  End of Life: not yet :-)
 	  URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
 
-config ADS8272
-	bool "ADS8272"
-
 config PQ2FADS
 	bool "Freescale-PQ2FADS"
 	help
@@ -698,11 +695,6 @@ config EV64360
 	  platform.
 endchoice
 
-config PQ2ADS
-	bool
-	depends on ADS8272
-	default y
-
 config TQM8xxL
 	bool
 	depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
@@ -725,15 +717,6 @@ config 8260
 	  this option means that you wish to build a kernel for a machine with
 	  an 8260 class CPU.
 
-config 8272
-	bool
-	depends on 6xx
-	default y if ADS8272
-	select 8260
-	help
-	  The MPC8272 CPM has a different internal dpram setup than other CPM2
-	  devices
-
 config CPM1
 	bool
 	depends on 8xx
@@ -1069,7 +1052,7 @@ config PCI_8260
 
 config 8260_PCI9
 	bool "Enable workaround for MPC826x erratum PCI 9"
-	depends on PCI_8260 && !ADS8272
+	depends on PCI_8260
 	default y
 
 choice