---

yaml
---
r: 353425
b: refs/heads/master
c: e2e8bfd
h: refs/heads/master
i:
  353423: 186a3a1
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 56b3f31fb384124790279ad39eb02ee66df4b9fd
+refs/heads/master: e2e8bfdf61573c98162d1112b971d8d00f00fcf8

trunk/Documentation/devicetree/bindings/sound/cs4271.txt

@@ -20,18 +20,6 @@ Optional properties:
 		!RESET pin
  - cirrus,amuteb-eq-bmutec:	When given, the Codec's AMUTEB=BMUTEC flag
 				is enabled.
- - cirrus,enable-soft-reset:
-	The CS4271 requires its LRCLK and MCLK to be stable before its RESET
-	line is de-asserted. That also means that clocks cannot be changed
-	without putting the chip back into hardware reset, which also requires
-	a complete re-initialization of all registers.
-
-	One (undocumented) workaround is to assert and de-assert the PDN bit
-	in the MODE2 register. This workaround can be enabled with this DT
-	property.
-
-	Note that this is not needed in case the clocks are stable
-	throughout the entire runtime of the codec.
 
 Examples:
 

trunk/Documentation/devicetree/bindings/sound/tlv320aic3x.txt

@@ -11,6 +11,12 @@ Optional properties:
 
 - gpio-reset - gpio pin number used for codec reset
 - ai3x-gpio-func - <array of 2 int> - AIC3X_GPIO1 & AIC3X_GPIO2 Functionality
+- ai3x-micbias-vg - MicBias Voltage required.
+	1 - MICBIAS output is powered to 2.0V,
+	2 - MICBIAS output is powered to 2.5V,
+	3 - MICBIAS output is connected to AVDD,
+	If this node is not mentioned or if the value is incorrect, then MicBias
+	is powered down.
 
 Example:
 

trunk/Documentation/kernel-parameters.txt

@@ -2438,7 +2438,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			real-time workloads.  It can also improve energy
 			efficiency for asymmetric multiprocessors.
 
-	rcu_nocb_poll	[KNL,BOOT]
+	rcu_nocbs_poll	[KNL,BOOT]
 			Rather than requiring that offloaded CPUs
 			(specified by rcu_nocbs= above) explicitly
 			awaken the corresponding "rcuoN" kthreads,

trunk/Documentation/x86/boot.txt

@@ -57,7 +57,7 @@ Protocol 2.10:	(Kernel 2.6.31) Added a protocol for relaxed alignment
 Protocol 2.11:	(Kernel 3.6) Added a field for offset of EFI handover
 		protocol entry point.
 
-Protocol 2.12:	(Kernel 3.8) Added the xloadflags field and extension fields
+Protocol 2.12:	(Kernel 3.9) Added the xloadflags field and extension fields
 	 	to struct boot_params for for loading bzImage and ramdisk
 		above 4G in 64bit.
 

trunk/MAINTAINERS

@@ -1489,7 +1489,7 @@ AVR32 ARCHITECTURE
 M:	Haavard Skinnemoen <hskinnemoen@gmail.com>
 M:	Hans-Christian Egtvedt <egtvedt@samfundet.no>
 W:	http://www.atmel.com/products/AVR32/
-W:	http://mirror.egtvedt.no/avr32linux.org/
+W:	http://avr32linux.org/
 W:	http://avrfreaks.net/
 S:	Maintained
 F:	arch/avr32/

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 8
 SUBLEVEL = 0
-EXTRAVERSION = -rc7
+EXTRAVERSION = -rc6
 NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*

trunk/arch/arm/boot/dts/exynos5250-smdk5250.dts

@@ -49,11 +49,6 @@
 			compatible = "samsung,s524ad0xd1";
 			reg = <0x51>;
 		};
-
-		wm8994: wm8994@1a {
-			 compatible = "wlf,wm8994";
-			 reg = <0x1a>;
-		};
 	};
 
 	i2c@121D0000 {
@@ -209,25 +204,4 @@
 		samsung,mfc-r = <0x43000000 0x800000>;
 		samsung,mfc-l = <0x51000000 0x800000>;
 	};
-
-	i2s0: i2s@03830000 {
-		gpios = <&gpz 0 2 0 0>, <&gpz 1 2 0 0>, <&gpz 2 2 0 0>,
-			<&gpz 3 2 0 0>, <&gpz 4 2 0 0>, <&gpz 5 2 0 0>,
-			<&gpz 6 2 0 0>;
-	};
-
-	i2s1: i2s@12D60000 {
-		status = "disabled";
-	};
-
-	i2s2: i2s@12D70000 {
-		status = "disabled";
-	};
-
-	sound {
-		compatible = "samsung,smdk-wm8994";
-
-		samsung,i2s-controller = <&i2s0>;
-		samsung,audio-codec = <&wm8994>;
-	};
 };

trunk/arch/arm/boot/dts/exynos5250.dtsi

@@ -211,9 +211,8 @@
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x12d20000 0x100>;
 		interrupts = <0 66 0>;
-		dmas = <&pdma0 5
-			&pdma0 4>;
-		dma-names = "tx", "rx";
+		tx-dma-channel = <&pdma0 5>; /* preliminary */
+		rx-dma-channel = <&pdma0 4>; /* preliminary */
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
@@ -222,9 +221,8 @@
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x12d30000 0x100>;
 		interrupts = <0 67 0>;
-		dmas = <&pdma1 5
-			&pdma1 4>;
-		dma-names = "tx", "rx";
+		tx-dma-channel = <&pdma1 5>; /* preliminary */
+		rx-dma-channel = <&pdma1 4>; /* preliminary */
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
@@ -233,9 +231,8 @@
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x12d40000 0x100>;
 		interrupts = <0 68 0>;
-		dmas = <&pdma0 7
-			&pdma0 6>;
-		dma-names = "tx", "rx";
+		tx-dma-channel = <&pdma0 7>; /* preliminary */
+		rx-dma-channel = <&pdma0 6>; /* preliminary */
 		#address-cells = <1>;
 		#size-cells = <0>;
 	};
@@ -272,35 +269,6 @@
 		#size-cells = <0>;
 	};
 
-	i2s0: i2s@03830000 {
-		compatible = "samsung,i2s-v5";
-		reg = <0x03830000 0x100>;
-		dmas = <&pdma0 10
-			&pdma0 9
-			&pdma0 8>;
-		dma-names = "tx", "rx", "tx-sec";
-		samsung,supports-6ch;
-		samsung,supports-rstclr;
-		samsung,supports-secdai;
-		samsung,idma-addr = <0x03000000>;
-	};
-
-	i2s1: i2s@12D60000 {
-		compatible = "samsung,i2s-v5";
-		reg = <0x12D60000 0x100>;
-		dmas = <&pdma1 12
-			&pdma1 11>;
-		dma-names = "tx", "rx";
-	};
-
-	i2s2: i2s@12D70000 {
-		compatible = "samsung,i2s-v5";
-		reg = <0x12D70000 0x100>;
-		dmas = <&pdma0 12
-			&pdma0 11>;
-		dma-names = "tx", "rx";
-	};
-
 	amba {
 		#address-cells = <1>;
 		#size-cells = <1>;