ARM: OMAP2+: Introduce local usb.h

Let's move what we can from plat/usb.h to the local usb.h
for ARM common zImage support.

This is needed so we can remove plat/usb.h for ARM common
zImage support.

Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Partha Basak <parthab@india.ti.com>
Cc: Keshava Munegowda <keshava_mgowda@ti.com>
Cc: linux-usb@vger.kernel.org
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap1/clock.c

@@ -22,7 +22,6 @@
 #include <asm/mach-types.h>
 
 #include <plat/cpu.h>
-#include <plat/usb.h>
 #include <plat/clock.h>
 #include <plat/sram.h>
 #include <plat/clkdev_omap.h>

arch/arm/mach-omap2/board-2430sdp.c

@@ -35,7 +35,6 @@
 
 #include "common.h"
 #include <plat/gpmc.h>
-#include <plat/usb.h>
 #include "gpmc-smc91x.h"
 
 #include <video/omapdss.h>

arch/arm/mach-omap2/board-3430sdp.c

@@ -30,7 +30,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/usb.h>
 #include "common.h"
 #include <plat/dma.h>
 #include <plat/gpmc.h>

arch/arm/mach-omap2/board-3630sdp.c

@@ -18,7 +18,6 @@
 
 #include "common.h"
 #include "gpmc-smc91x.h"
-#include <plat/usb.h>
 
 #include <mach/board-zoom.h>
 

arch/arm/mach-omap2/board-4430sdp.c

@@ -34,7 +34,6 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
-#include <plat/usb.h>
 #include <plat/mmc.h>
 #include "omap4-keypad.h"
 #include <video/omapdss.h>

arch/arm/mach-omap2/board-am3517crane.c

@@ -26,7 +26,6 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
-#include <plat/usb.h>
 
 #include "am35xx-emac.h"
 #include "mux.h"

arch/arm/mach-omap2/board-am3517evm.c

@@ -33,7 +33,6 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
-#include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 #include <video/omap-panel-tfp410.h>

arch/arm/mach-omap2/board-cm-t35.c

@@ -41,7 +41,6 @@
 #include "common.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/gpmc.h>
-#include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 #include <video/omap-panel-tfp410.h>

arch/arm/mach-omap2/board-cm-t3517.c

@@ -39,7 +39,6 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
-#include <plat/usb.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/gpmc.h>
 

arch/arm/mach-omap2/board-devkit8000.c

@@ -41,7 +41,6 @@
 #include "common.h"
 #include <plat/gpmc.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 #include <video/omap-panel-tfp410.h>

arch/arm/mach-omap2/board-igep0020.c

@@ -31,7 +31,6 @@
 
 #include "common.h"
 #include <plat/gpmc.h>
-#include <plat/usb.h>
 
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>

arch/arm/mach-omap2/board-ldp.c

@@ -37,7 +37,6 @@
 #include "common.h"
 #include <plat/gpmc.h>
 #include <mach/board-zoom.h>
-#include <plat/usb.h>
 #include "gpmc-smsc911x.h"
 
 #include <video/omapdss.h>

arch/arm/mach-omap2/board-omap3beagle.c

@@ -43,7 +43,6 @@
 #include <video/omap-panel-tfp410.h>
 #include <plat/gpmc.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/usb.h>
 #include <plat/omap_device.h>
 
 #include "mux.h"

arch/arm/mach-omap2/board-omap3evm.c

@@ -45,7 +45,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/usb.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include "common.h"
 #include <linux/platform_data/spi-omap2-mcspi.h>

arch/arm/mach-omap2/board-omap3logic.c

@@ -37,7 +37,6 @@
 #include "gpmc-smsc911x.h"
 #include <plat/gpmc.h>
 #include <plat/sdrc.h>
-#include <plat/usb.h>
 
 #include "common.h"
 #include "mux.h"

arch/arm/mach-omap2/board-omap3pandora.c

@@ -42,7 +42,6 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
-#include <plat/usb.h>
 #include <video/omapdss.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
 

arch/arm/mach-omap2/board-omap3stalker.c

@@ -42,7 +42,6 @@
 #include "common.h"
 #include <plat/gpmc.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 #include <video/omap-panel-tfp410.h>

arch/arm/mach-omap2/board-omap3touchbook.c

@@ -46,7 +46,6 @@
 #include "common.h"
 #include <plat/gpmc.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/usb.h>
 
 #include "mux.h"
 #include "hsmmc.h"

arch/arm/mach-omap2/board-omap4panda.c

@@ -39,7 +39,6 @@
 #include <video/omapdss.h>
 
 #include "common.h"
-#include <plat/usb.h>
 #include <plat/mmc.h>
 #include <video/omap-panel-tfp410.h>
 

arch/arm/mach-omap2/board-overo.c

@@ -50,7 +50,6 @@
 #include <video/omap-panel-generic-dpi.h>
 #include <video/omap-panel-tfp410.h>
 #include <plat/gpmc.h>
-#include <plat/usb.h>
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"

arch/arm/mach-omap2/board-rm680.c

@@ -24,7 +24,6 @@
 
 #include <plat/i2c.h>
 #include <plat/mmc.h>
-#include <plat/usb.h>
 #include <plat/gpmc.h>
 #include "common.h"
 #include <plat/serial.h>

arch/arm/mach-omap2/board-rx51.c

@@ -26,7 +26,6 @@
 #include "common.h"
 #include <plat/dma.h>
 #include <plat/gpmc.h>
-#include <plat/usb.h>
 
 #include "mux.h"
 #include "pm.h"

arch/arm/mach-omap2/board-ti8168evm.c

@@ -20,7 +20,6 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
-#include <plat/usb.h>
 
 static struct omap_musb_board_data musb_board_data = {
 	.set_phy_power	= ti81xx_musb_phy_power,

arch/arm/mach-omap2/board-zoom-peripherals.c

@@ -26,7 +26,6 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
-#include <plat/usb.h>
 
 #include <mach/board-zoom.h>
 

arch/arm/mach-omap2/board-zoom.c

@@ -22,7 +22,6 @@
 #include <asm/mach/arch.h>
 
 #include "common.h"
-#include <plat/usb.h>
 
 #include <mach/board-zoom.h>
 

arch/arm/mach-omap2/common.h

@@ -36,6 +36,8 @@
 #include <plat/serial.h>
 #include <plat/common.h>
 
+#include "usb.h"
+
 #define OMAP_INTC_START		NR_IRQS
 
 #ifdef CONFIG_SOC_OMAP2420

arch/arm/mach-omap2/omap_phy_internal.c

@@ -27,11 +27,11 @@
 #include <linux/io.h>
 #include <linux/err.h>
 #include <linux/usb.h>
-
-#include <plat/usb.h>
+#include <linux/usb/musb.h>
 
 #include "soc.h"
 #include "control.h"
+#include "usb.h"
 
 void am35x_musb_reset(void)
 {

arch/arm/mach-omap2/twl-common.c

@@ -27,7 +27,6 @@
 #include <linux/regulator/fixed.h>
 
 #include <plat/i2c.h>
-#include <plat/usb.h>
 
 #include "soc.h"
 #include "twl-common.h"

arch/arm/mach-omap2/usb-host.c

@@ -25,10 +25,10 @@
 
 #include <asm/io.h>
 
-#include <plat/usb.h>
 #include <plat/omap_device.h>
 
 #include "mux.h"
+#include "usb.h"
 
 #ifdef CONFIG_MFD_OMAP_USB_HOST
 

arch/arm/mach-omap2/usb-musb.c

@@ -25,12 +25,12 @@
 #include <linux/io.h>
 #include <linux/usb/musb.h>
 
-#include <plat/usb.h>
 #include <plat/omap_device.h>
 
 #include "am35xx.h"
 
 #include "mux.h"
+#include "usb.h"
 
 static struct musb_hdrc_config musb_config = {
 	.multipoint	= 1,

arch/arm/mach-omap2/usb.h

@@ -0,0 +1,82 @@
+#include <plat/usb.h>
+
+/* AM35x */
+/* USB 2.0 PHY Control */
+#define CONF2_PHY_GPIOMODE	(1 << 23)
+#define CONF2_OTGMODE		(3 << 14)
+#define CONF2_NO_OVERRIDE	(0 << 14)
+#define CONF2_FORCE_HOST	(1 << 14)
+#define CONF2_FORCE_DEVICE	(2 << 14)
+#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
+#define CONF2_SESENDEN		(1 << 13)
+#define CONF2_VBDTCTEN		(1 << 12)
+#define CONF2_REFFREQ_24MHZ	(2 << 8)
+#define CONF2_REFFREQ_26MHZ	(7 << 8)
+#define CONF2_REFFREQ_13MHZ	(6 << 8)
+#define CONF2_REFFREQ		(0xf << 8)
+#define CONF2_PHYCLKGD		(1 << 7)
+#define CONF2_VBUSSENSE		(1 << 6)
+#define CONF2_PHY_PLLON		(1 << 5)
+#define CONF2_RESET		(1 << 4)
+#define CONF2_PHYPWRDN		(1 << 3)
+#define CONF2_OTGPWRDN		(1 << 2)
+#define CONF2_DATPOL		(1 << 1)
+
+/* TI81XX specific definitions */
+#define USBCTRL0	0x620
+#define USBSTAT0	0x624
+
+/* TI816X PHY controls bits */
+#define TI816X_USBPHY0_NORMAL_MODE	(1 << 0)
+#define TI816X_USBPHY_REFCLK_OSC	(1 << 8)
+
+/* TI814X PHY controls bits */
+#define USBPHY_CM_PWRDN		(1 << 0)
+#define USBPHY_OTG_PWRDN	(1 << 1)
+#define USBPHY_CHGDET_DIS	(1 << 2)
+#define USBPHY_CHGDET_RSTRT	(1 << 3)
+#define USBPHY_SRCONDM		(1 << 4)
+#define USBPHY_SINKONDP		(1 << 5)
+#define USBPHY_CHGISINK_EN	(1 << 6)
+#define USBPHY_CHGVSRC_EN	(1 << 7)
+#define USBPHY_DMPULLUP		(1 << 8)
+#define USBPHY_DPPULLUP		(1 << 9)
+#define USBPHY_CDET_EXTCTL	(1 << 10)
+#define USBPHY_GPIO_MODE	(1 << 12)
+#define USBPHY_DPOPBUFCTL	(1 << 13)
+#define USBPHY_DMOPBUFCTL	(1 << 14)
+#define USBPHY_DPINPUT		(1 << 15)
+#define USBPHY_DMINPUT		(1 << 16)
+#define USBPHY_DPGPIO_PD	(1 << 17)
+#define USBPHY_DMGPIO_PD	(1 << 18)
+#define USBPHY_OTGVDET_EN	(1 << 19)
+#define USBPHY_OTGSESSEND_EN	(1 << 20)
+#define USBPHY_DATA_POLARITY	(1 << 23)
+
+struct usbhs_omap_board_data {
+	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
+
+	/* have to be valid if phy_reset is true and portx is in phy mode */
+	int	reset_gpio_port[OMAP3_HS_USB_PORTS];
+
+	/* Set this to true for ES2.x silicon */
+	unsigned			es2_compatibility:1;
+
+	unsigned			phy_reset:1;
+
+	/*
+	 * Regulators for USB PHYs.
+	 * Each PHY can have a separate regulator.
+	 */
+	struct regulator		*regulator[OMAP3_HS_USB_PORTS];
+};
+
+extern void usb_musb_init(struct omap_musb_board_data *board_data);
+extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
+
+extern void am35x_musb_reset(void);
+extern void am35x_musb_phy_power(u8 on);
+extern void am35x_musb_clear_irq(void);
+extern void am35x_set_mode(u8 musb_mode);
+extern void ti81xx_musb_phy_power(u8 on);
+