[ARM] 3226/1: IXP4xx runtime expansion bus window size configuration

Patch from Deepak Saxena The expansion bus on the IXP46x NPU can be configured for either 32MiB or 16MiB windows and changing the configuration causes the base address for each chip select for each region to change. Because of this, we cannot hardcode the physical base as we currently do. This patch checks the expansion bus configuration registers at runtime to determine the appropriate window size. Note that this requires that the bootloader already configured the device sizes appropriately, but I feel that is valid assumption to make as the bootloader must configure and access the flash window, the output display (LCD, LEDs, etc) window, and other expansion bus devices. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
git-mirror · Jan 5, 2006 · 54e269e · 54e269e
1 parent 2b9ac7c
commit 54e269e
Show file tree

Hide file tree

Showing 11 changed files with 53 additions and 46 deletions.
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
@@ -332,11 +332,27 @@ static struct platform_device *ixp46x_devices[] __initdata = {
 	&ixp46x_i2c_controller
 };
 
+unsigned long ixp4xx_exp_bus_size;
+
 void __init ixp4xx_sys_init(void)
 {
+	ixp4xx_exp_bus_size = SZ_16M;
+
 	if (cpu_is_ixp46x()) {
+		int region;
+
 		platform_add_devices(ixp46x_devices,
 				ARRAY_SIZE(ixp46x_devices));
+
+		for (region = 0; region < 7; region++) {
+			if((*(IXP4XX_EXP_REG(0x4 * region)) & 0x200)) {
+				ixp4xx_exp_bus_size = SZ_32M;
+				break;
+			}
+		}
 	}
+
+	printk("IXP4xx: Using %uMiB expansion bus window size\n",
+			ixp4xx_exp_bus_size >> 20);
 }
 
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -14,6 +14,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
+#include <linux/slab.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -30,8 +31,6 @@ static struct flash_platform_data coyote_flash_data = {
 };
 
 static struct resource coyote_flash_resource = {
-	.start		= COYOTE_FLASH_BASE,
-	.end		= COYOTE_FLASH_BASE + COYOTE_FLASH_SIZE - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -81,6 +80,11 @@ static struct platform_device *coyote_devices[] __initdata = {
 
 static void __init coyote_init(void)
 {
+	ixp4xx_sys_init();
+
+	coyote_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	coyote_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
+
 	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
 	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
 
@@ -91,8 +95,6 @@ static void __init coyote_init(void)
 		coyote_uart_data[0].irq = IRQ_IXP4XX_UART1;
 	}
 
-
-	ixp4xx_sys_init();
 	platform_add_devices(coyote_devices, ARRAY_SIZE(coyote_devices));
 }
 

diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -27,6 +27,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
+#include <linux/slab.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -106,11 +107,9 @@ static struct flash_platform_data gtwx5715_flash_data = {
 	.width		= 2,
 };
 
-static struct resource gtwx5715_flash_resource = {
-	.start		= GTWX5715_FLASH_BASE,
-	.end		= GTWX5715_FLASH_BASE + GTWX5715_FLASH_SIZE - 1,
+static struct gtw5715_flash_resource = {
 	.flags		= IORESOURCE_MEM,
-};
+}
 
 static struct platform_device gtwx5715_flash = {
 	.name		= "IXP4XX-Flash",
@@ -129,6 +128,14 @@ static struct platform_device *gtwx5715_devices[] __initdata = {
 
 static void __init gtwx5715_init(void)
 {
+	ixp4xx_sys_init();
+
+	if (!flash_resource)
+		printk(KERN_ERR "Could not allocate flash resource\n");
+
+	gtwx5715_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	gtwx5715_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1;
+
 	platform_add_devices(gtwx5715_devices, ARRAY_SIZE(gtwx5715_devices));
 }
 

diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -14,6 +14,7 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
+#include <linux/slab.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -30,8 +31,6 @@ static struct flash_platform_data ixdp425_flash_data = {
 };
 
 static struct resource ixdp425_flash_resource = {
-	.start		= IXDP425_FLASH_BASE,
-	.end		= IXDP425_FLASH_BASE + IXDP425_FLASH_SIZE - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -108,17 +107,13 @@ static struct platform_device *ixdp425_devices[] __initdata = {
 	&ixdp425_uart
 };
 
-
 static void __init ixdp425_init(void)
 {
 	ixp4xx_sys_init();
 
-	/*
-	 * IXP465 has 32MB window
-	 */
-	if (machine_is_ixdp465()) {
-		ixdp425_flash_resource.end += IXDP425_FLASH_SIZE;
-	}
+	ixdp425_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	ixdp425_flash_resource.end =
+		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
 
 	platform_add_devices(ixdp425_devices, ARRAY_SIZE(ixdp425_devices));
 }

diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -26,8 +26,6 @@ static struct flash_platform_data nas100d_flash_data = {
 };
 
 static struct resource nas100d_flash_resource = {
-	.start			= NAS100D_FLASH_BASE,
-	.end			= NAS100D_FLASH_BASE + NAS100D_FLASH_SIZE,
 	.flags			= IORESOURCE_MEM,
 };
 
@@ -115,6 +113,10 @@ static void __init nas100d_init(void)
 {
 	ixp4xx_sys_init();
 
+	nas100d_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	nas100d_flash_resource.end =
+		IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
 	pm_power_off = nas100d_power_off;
 
 	platform_add_devices(nas100d_devices, ARRAY_SIZE(nas100d_devices));

diff --git a/include/asm-arm/arch-ixp4xx/coyote.h b/include/asm-arm/arch-ixp4xx/coyote.h
@@ -16,17 +16,14 @@
 #error "Do not include this directly, instead #include <asm/hardware.h>"
 #endif
 
-#define	COYOTE_FLASH_BASE	IXP4XX_EXP_BUS_CS0_BASE_PHYS
-#define	COYOTE_FLASH_SIZE	IXP4XX_EXP_BUS_CSX_REGION_SIZE * 2
-
 /* PCI controller GPIO to IRQ pin mappings */
 #define	COYOTE_PCI_SLOT0_PIN	6
 #define	COYOTE_PCI_SLOT1_PIN	11
 
 #define	COYOTE_PCI_SLOT0_DEVID	14
 #define	COYOTE_PCI_SLOT1_DEVID	15
 
-#define	COYOTE_IDE_BASE_PHYS	IXP4XX_EXP_BUS_CS3_BASE_PHYS
+#define	COYOTE_IDE_BASE_PHYS	IXP4XX_EXP_BUS_BASE(3)
 #define	COYOTE_IDE_BASE_VIRT	0xFFFE1000
 #define	COYOTE_IDE_REGION_SIZE	0x1000
 

diff --git a/include/asm-arm/arch-ixp4xx/gtwx5715.h b/include/asm-arm/arch-ixp4xx/gtwx5715.h
@@ -57,10 +57,6 @@
 #define GTWX5715_GPIO13_IRQ		IRQ_IXP4XX_SW_INT1
 #define GTWX5715_GPIO14_IRQ		IRQ_IXP4XX_SW_INT2
 
-
-#define	GTWX5715_FLASH_BASE	IXP4XX_EXP_BUS_CS0_BASE_PHYS
-#define	GTWX5715_FLASH_SIZE	(0x00800000)
-
 /* PCI controller GPIO to IRQ pin mappings
 
 			INTA	INTB

diff --git a/include/asm-arm/arch-ixp4xx/ixdp425.h b/include/asm-arm/arch-ixp4xx/ixdp425.h
@@ -16,9 +16,6 @@
 #error "Do not include this directly, instead #include <asm/hardware.h>"
 #endif
 
-#define	IXDP425_FLASH_BASE	IXP4XX_EXP_BUS_CS0_BASE_PHYS
-#define	IXDP425_FLASH_SIZE	IXP4XX_EXP_BUS_CSX_REGION_SIZE
-
 #define	IXDP425_SDA_PIN		7
 #define	IXDP425_SCL_PIN		6
 

diff --git a/include/asm-arm/arch-ixp4xx/nas100d.h b/include/asm-arm/arch-ixp4xx/nas100d.h
@@ -19,9 +19,6 @@
 #error "Do not include this directly, instead #include <asm/hardware.h>"
 #endif
 
-#define NAS100D_FLASH_BASE	IXP4XX_EXP_BUS_CS0_BASE_PHYS
-#define NAS100D_FLASH_SIZE	IXP4XX_EXP_BUS_CSX_REGION_SIZE
-
 #define NAS100D_SDA_PIN		6
 #define NAS100D_SCL_PIN		5
 

diff --git a/include/asm-arm/arch-ixp4xx/nslu2.h b/include/asm-arm/arch-ixp4xx/nslu2.h
@@ -18,9 +18,6 @@
 #error "Do not include this directly, instead #include <asm/hardware.h>"
 #endif
 
-#define NSLU2_FLASH_BASE	IXP4XX_EXP_BUS_CS0_BASE_PHYS
-#define NSLU2_FLASH_SIZE	IXP4XX_EXP_BUS_CSX_REGION_SIZE
-
 #define NSLU2_SDA_PIN		7
 #define NSLU2_SCL_PIN		6
 

diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h
@@ -26,16 +26,17 @@
  */
 #define IXP4XX_EXP_BUS_BASE_PHYS	(0x50000000)
 
-#define	IXP4XX_EXP_BUS_CSX_REGION_SIZE	(0x01000000)
-
-#define IXP4XX_EXP_BUS_CS0_BASE_PHYS	(IXP4XX_EXP_BUS_BASE_PHYS + 0x00000000)
-#define IXP4XX_EXP_BUS_CS1_BASE_PHYS	(IXP4XX_EXP_BUS_BASE_PHYS + 0x01000000)
-#define IXP4XX_EXP_BUS_CS2_BASE_PHYS	(IXP4XX_EXP_BUS_BASE_PHYS + 0x02000000)
-#define IXP4XX_EXP_BUS_CS3_BASE_PHYS	(IXP4XX_EXP_BUS_BASE_PHYS + 0x03000000)
-#define IXP4XX_EXP_BUS_CS4_BASE_PHYS	(IXP4XX_EXP_BUS_BASE_PHYS + 0x04000000)
-#define IXP4XX_EXP_BUS_CS5_BASE_PHYS	(IXP4XX_EXP_BUS_BASE_PHYS + 0x05000000)
-#define IXP4XX_EXP_BUS_CS6_BASE_PHYS	(IXP4XX_EXP_BUS_BASE_PHYS + 0x06000000)
-#define IXP4XX_EXP_BUS_CS7_BASE_PHYS	(IXP4XX_EXP_BUS_BASE_PHYS + 0x07000000)
+/*
+ * The expansion bus on the IXP4xx can be configured for either 16 or
+ * 32MB windows and the CS offset for each region changes based on the
+ * current configuration. This means that we cannot simply hardcode
+ * each offset. ixp4xx_sys_init() looks at the expansion bus configuration
+ * as setup by the bootloader to determine our window size.
+ */
+extern unsigned long ixp4xx_exp_bus_size;
+
+#define	IXP4XX_EXP_BUS_BASE(region)\
+		(IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size))
 
 #define IXP4XX_FLASH_WRITABLE	(0x2)
 #define IXP4XX_FLASH_DEFAULT	(0xbcd23c40)