ALSA: sscape: fix incorrect timeout after microcode upload

A comment states that one should wait up to 5 secs
while a waiting loop waits only 5 system ticks.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

sound/isa/sscape.c

@@ -393,20 +393,20 @@ static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg, unsigned ti
  */
 static int obp_startup_ack(struct soundscape *s, unsigned timeout)
 {
-	while (timeout != 0) {
+	unsigned long end_time = jiffies + msecs_to_jiffies(timeout);
+
+	do {
 		unsigned long flags;
 		unsigned char x;
 
-		schedule_timeout_uninterruptible(1);
-
 		spin_lock_irqsave(&s->lock, flags);
 		x = inb(HOST_DATA_IO(s->io_base));
 		spin_unlock_irqrestore(&s->lock, flags);
 		if ((x & 0xfe) == 0xfe)
 			return 1;
 
-		--timeout;
-	} /* while */
+		msleep(10);
+	} while (time_before(jiffies, end_time));
 
 	return 0;
 }
@@ -420,20 +420,20 @@ static int obp_startup_ack(struct soundscape *s, unsigned timeout)
  */
 static int host_startup_ack(struct soundscape *s, unsigned timeout)
 {
-	while (timeout != 0) {
+	unsigned long end_time = jiffies + msecs_to_jiffies(timeout);
+
+	do {
 		unsigned long flags;
 		unsigned char x;
 
-		schedule_timeout_uninterruptible(1);
-
 		spin_lock_irqsave(&s->lock, flags);
 		x = inb(HOST_DATA_IO(s->io_base));
 		spin_unlock_irqrestore(&s->lock, flags);
 		if (x == 0xfe)
 			return 1;
 
-		--timeout;
-	} /* while */
+		msleep(10);
+	} while (time_before(jiffies, end_time));
 
 	return 0;
 }
@@ -529,10 +529,10 @@ static int upload_dma_data(struct soundscape *s,
 	 * give it 5 seconds (max) ...
 	 */
 	ret = 0;
-	if (!obp_startup_ack(s, 5)) {
+	if (!obp_startup_ack(s, 5000)) {
 		snd_printk(KERN_ERR "sscape: No response from on-board processor after upload\n");
 		ret = -EAGAIN;
-	} else if (!host_startup_ack(s, 5)) {
+	} else if (!host_startup_ack(s, 5000)) {
 		snd_printk(KERN_ERR "sscape: SoundScape failed to initialise\n");
 		ret = -EAGAIN;
 	}