---

yaml
---
r: 338317
b: refs/heads/master
c: d21f30c
h: refs/heads/master
i:
  338315: 2439b89
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: fe2e0d5228aa170fa725c2cb02cf423838c30bb3
+refs/heads/master: d21f30c99e7c46cceb19f45e378a8d6a0a707428

trunk/drivers/staging/iio/adc/ad7793.c

@@ -118,6 +118,12 @@ static int ad7793_setup(struct iio_dev *indio_dev,
 	unsigned long long scale_uv;
 	u32 id;
 
+	if ((pdata->current_source_direction == AD7793_IEXEC1_IEXEC2_IOUT1 ||
+		pdata->current_source_direction == AD7793_IEXEC1_IEXEC2_IOUT2) &&
+		((pdata->exitation_current != AD7793_IX_10uA) &&
+		(pdata->exitation_current != AD7793_IX_210uA)))
+		return -EINVAL;
+
 	/* reset the serial interface */
 	ret = spi_write(st->sd.spi, (u8 *)&ret, sizeof(ret));
 	if (ret < 0)
@@ -136,8 +142,18 @@ static int ad7793_setup(struct iio_dev *indio_dev,
 		goto out;
 	}
 
-	st->mode = pdata->mode;
-	st->conf = pdata->conf;
+	st->mode = AD7793_MODE_RATE(1);
+	st->mode |= AD7793_MODE_CLKSRC(pdata->clock_src);
+	st->conf = AD7793_CONF_REFSEL(pdata->refsel);
+	st->conf |= AD7793_CONF_VBIAS(pdata->bias_voltage);
+	if (pdata->buffered)
+		st->conf |= AD7793_CONF_BUF;
+	if (pdata->boost_enable)
+		st->conf |= AD7793_CONF_BOOST;
+	if (pdata->burnout_current)
+		st->conf |= AD7793_CONF_BO_EN;
+	if (pdata->unipolar)
+		st->conf |= AD7793_CONF_UNIPOLAR;
 
 	ret = ad7793_set_mode(&st->sd, AD_SD_MODE_IDLE);
 	if (ret)
@@ -147,8 +163,9 @@ static int ad7793_setup(struct iio_dev *indio_dev,
 	if (ret)
 		goto out;
 
-	ret = ad_sd_write_reg(&st->sd, AD7793_REG_IO,
-			       sizeof(pdata->io), pdata->io);
+	ret = ad_sd_write_reg(&st->sd, AD7793_REG_IO, 1,
+				   pdata->exitation_current |
+			       (pdata->current_source_direction << 2));
 	if (ret)
 		goto out;
 

trunk/drivers/staging/iio/adc/ad7793.h

@@ -68,7 +68,7 @@
 #define AD7793_CONF_UNIPOLAR	(1 << 12) /* Unipolar/Bipolar Enable */
 #define AD7793_CONF_BOOST	(1 << 11) /* Boost Enable */
 #define AD7793_CONF_GAIN(x)	(((x) & 0x7) << 8) /* Gain Select */
-#define AD7793_CONF_REFSEL	(1 << 7) /* INT/EXT Reference Select */
+#define AD7793_CONF_REFSEL(x)	((x) << 6) /* INT/EXT Reference Select */
 #define AD7793_CONF_BUF		(1 << 4) /* Buffered Mode Enable */
 #define AD7793_CONF_CHAN(x)	((x) & 0xf) /* Channel select */
 #define AD7793_CONF_CHAN_MASK	0xf /* Channel select mask */
@@ -105,11 +105,108 @@
 #define AD7793_IO_IXCEN_210uA	(2 << 0) /* Excitation Current 210uA */
 #define AD7793_IO_IXCEN_1mA	(3 << 0) /* Excitation Current 1mA */
 
+/**
+ * enum ad7793_clock_source - AD7793 clock source selection
+ * @AD7793_CLK_SRC_INT: Internal 64 kHz clock, not available at the CLK pin.
+ * @AD7793_CLK_SRC_INT_CO: Internal 64 kHz clock, available at the CLK pin.
+ * @AD7793_CLK_SRC_EXT: Use external clock.
+ * @AD7793_CLK_SRC_EXT_DIV2: Use external clock divided by 2.
+ */
+enum ad7793_clock_source {
+	AD7793_CLK_SRC_INT,
+	AD7793_CLK_SRC_INT_CO,
+	AD7793_CLK_SRC_EXT,
+	AD7793_CLK_SRC_EXT_DIV2,
+};
+
+/**
+ * enum ad7793_bias_voltage - AD7793 bias voltage selection
+ * @AD7793_BIAS_VOLTAGE_DISABLED: Bias voltage generator disabled
+ * @AD7793_BIAS_VOLTAGE_AIN1: Bias voltage connected to AIN1(-).
+ * @AD7793_BIAS_VOLTAGE_AIN2: Bias voltage connected to AIN2(-).
+ * @AD7793_BIAS_VOLTAGE_AIN3: Bias voltage connected to AIN3(-).
+ *	Only valid for AD7795/AD7796.
+ */
+enum ad7793_bias_voltage {
+	AD7793_BIAS_VOLTAGE_DISABLED,
+	AD7793_BIAS_VOLTAGE_AIN1,
+	AD7793_BIAS_VOLTAGE_AIN2,
+	AD7793_BIAS_VOLTAGE_AIN3,
+};
+
+/**
+ * enum ad7793_refsel - AD7793 reference voltage selection
+ * @AD7793_REFSEL_REFIN1: External reference applied between REFIN1(+)
+ *	and REFIN1(-).
+ * @AD7793_REFSEL_REFIN2: External reference applied between REFIN2(+) and
+ *	and REFIN1(-). Only valid for AD7795/AD7796.
+ * @AD7793_REFSEL_INTERNAL: Internal 1.17 V reference.
+ */
+enum ad7793_refsel {
+	AD7793_REFSEL_REFIN1 = 0,
+	AD7793_REFSEL_REFIN2 = 1,
+	AD7793_REFSEL_INTERNAL = 2,
+};
+
+/**
+ * enum ad7793_current_source_direction - AD7793 excitation current direction
+ * @AD7793_IEXEC1_IOUT1_IEXEC2_IOUT2: Current source IEXC1 connected to pin
+ *	IOUT1, current source IEXC2 connected to pin IOUT2.
+ * @AD7793_IEXEC1_IOUT2_IEXEC2_IOUT1: Current source IEXC2 connected to pin
+ *	IOUT1, current source IEXC1 connected to pin IOUT2.
+ * @AD7793_IEXEC1_IEXEC2_IOUT1: Both current sources connected to pin IOUT1.
+ *	Only valid when the current sources are set to 10 uA or 210 uA.
+ * @AD7793_IEXEC1_IEXEC2_IOUT2: Both current sources connected to Pin IOUT2.
+ *	Only valid when the current ources are set to 10 uA or 210 uA.
+ */
+enum ad7793_current_source_direction {
+	AD7793_IEXEC1_IOUT1_IEXEC2_IOUT2 = 0,
+	AD7793_IEXEC1_IOUT2_IEXEC2_IOUT1 = 1,
+	AD7793_IEXEC1_IEXEC2_IOUT1 = 2,
+	AD7793_IEXEC1_IEXEC2_IOUT2 = 3,
+};
+
+/**
+ * enum ad7793_excitation_current - AD7793 excitation current selection
+ * @AD7793_IX_DISABLED: Excitation current Disabled.
+ * @AD7793_IX_10uA: Enable 10 micro-ampere excitation current.
+ * @AD7793_IX_210uA: Enable 210 micro-ampere excitation current.
+ * @AD7793_IX_1mA: Enable 1 milli-Ampere excitation current.
+ */
+enum ad7793_excitation_current {
+	AD7793_IX_DISABLED = 0,
+	AD7793_IX_10uA = 1,
+	AD7793_IX_210uA = 2,
+	AD7793_IX_1mA = 3,
+};
+
+/**
+ * struct ad7793_platform_data - AD7793 platform data
+ * @vref_mv: Reference voltage in milli-Volt
+ * @clock_src: Clock source selection
+ * @burnout_current: If set to true the 100nA burnout current is enabled.
+ * @boost_enable: Enable boost for the bias voltage generator.
+ * @buffered: If set to true configure the device for buffered input mode.
+ * @unipolar: If set to true sample in unipolar mode, if set to false sample in
+ *		bipolar mode.
+ * @refsel: Reference voltage selection
+ * @bias_voltage: Bias voltage selection
+ * @exitation_current: Excitation current selection
+ * @current_source_direction: Excitation current direction selection
+ */
 struct ad7793_platform_data {
-	u16			vref_mv;
-	u16			mode;
-	u16			conf;
-	u8			io;
+	u16 vref_mv;
+
+	enum ad7793_clock_source clock_src;
+	bool burnout_current;
+	bool boost_enable;
+	bool buffered;
+	bool unipolar;
+
+	enum ad7793_refsel refsel;
+	enum ad7793_bias_voltage bias_voltage;
+	enum ad7793_excitation_current exitation_current;
+	enum ad7793_current_source_direction current_source_direction;
 };
 
 #endif /* IIO_ADC_AD7793_H_ */