---

yaml
---
r: 274274
b: refs/heads/master
c: b58dc41
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: d4a2e61f0b7a7b5b9e321e776a1e874c02e847e4
+refs/heads/master: b58dc4100b9190f2cb437f1f67ffcb9f9acc4923

trunk/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss

@@ -71,10 +71,3 @@ Description:	Value of 1 indicates the controller can honor the reset_devices
 		a dump device, as kdump requires resetting the device in order
 		to work reliably.
 
-Where:		/sys/bus/pci/devices/<dev>/ccissX/transport_mode
-Date:		July 2011
-Kernel Version:	3.0
-Contact:	iss_storagedev@hp.com
-Description:	Value of "simple" indicates that the controller has been placed
-		in "simple mode". Value of "performant" indicates that the
-		controller has been placed in "performant mode".

trunk/Documentation/CodingStyle

@@ -166,8 +166,8 @@ if (condition)
 else
 	do_that();
 
-This does not apply if only one branch of a conditional statement is a single
-statement; in the latter case use braces in both branches:
+This does not apply if one branch of a conditional statement is a single
+statement. Use braces in both branches.
 
 if (condition) {
 	do_this();

trunk/Documentation/DocBook/media/v4l/compat.xml

@@ -2486,9 +2486,6 @@ ioctls.</para>
         <listitem>
 	  <para>Flash API. <xref linkend="flash-controls" /></para>
         </listitem>
-        <listitem>
-	  <para>&VIDIOC-CREATE-BUFS; and &VIDIOC-PREPARE-BUF; ioctls.</para>
-        </listitem>
       </itemizedlist>
     </section>
 

trunk/Documentation/DocBook/media/v4l/controls.xml

@@ -232,9 +232,8 @@ control is deprecated. New drivers and applications should use the
 	    <entry>Enables a power line frequency filter to avoid
 flicker. Possible values for <constant>enum v4l2_power_line_frequency</constant> are:
 <constant>V4L2_CID_POWER_LINE_FREQUENCY_DISABLED</constant> (0),
-<constant>V4L2_CID_POWER_LINE_FREQUENCY_50HZ</constant> (1),
-<constant>V4L2_CID_POWER_LINE_FREQUENCY_60HZ</constant> (2) and
-<constant>V4L2_CID_POWER_LINE_FREQUENCY_AUTO</constant> (3).</entry>
+<constant>V4L2_CID_POWER_LINE_FREQUENCY_50HZ</constant> (1) and
+<constant>V4L2_CID_POWER_LINE_FREQUENCY_60HZ</constant> (2).</entry>
 	  </row>
 	  <row>
 	    <entry><constant>V4L2_CID_HUE_AUTO</constant></entry>

trunk/Documentation/DocBook/media/v4l/io.xml

@@ -927,33 +927,6 @@ ioctl is called.</entry>
 Applications set or clear this flag before calling the
 <constant>VIDIOC_QBUF</constant> ioctl.</entry>
 	  </row>
-	  <row>
-	    <entry><constant>V4L2_BUF_FLAG_PREPARED</constant></entry>
-	    <entry>0x0400</entry>
-	    <entry>The buffer has been prepared for I/O and can be queued by the
-application. Drivers set or clear this flag when the
-<link linkend="vidioc-querybuf">VIDIOC_QUERYBUF</link>, <link
-	  linkend="vidioc-qbuf">VIDIOC_PREPARE_BUF</link>, <link
-	  linkend="vidioc-qbuf">VIDIOC_QBUF</link> or <link
-	  linkend="vidioc-qbuf">VIDIOC_DQBUF</link> ioctl is called.</entry>
-	  </row>
-	  <row>
-	    <entry><constant>V4L2_BUF_FLAG_NO_CACHE_INVALIDATE</constant></entry>
-	    <entry>0x0400</entry>
-	    <entry>Caches do not have to be invalidated for this buffer.
-Typically applications shall use this flag if the data captured in the buffer
-is not going to be touched by the CPU, instead the buffer will, probably, be
-passed on to a DMA-capable hardware unit for further processing or output.
-</entry>
-	  </row>
-	  <row>
-	    <entry><constant>V4L2_BUF_FLAG_NO_CACHE_CLEAN</constant></entry>
-	    <entry>0x0800</entry>
-	    <entry>Caches do not have to be cleaned for this buffer.
-Typically applications shall use this flag for output buffers if the data
-in this buffer has not been created by the CPU but by some DMA-capable unit,
-in which case caches have not been used.</entry>
-	  </row>
 	</tbody>
       </tgroup>
     </table>

trunk/Documentation/DocBook/media/v4l/v4l2.xml

@@ -469,7 +469,6 @@ and discussions on the V4L mailing list.</revremark>
     &sub-close;
     &sub-ioctl;
     <!-- All ioctls go here. -->
-    &sub-create-bufs;
     &sub-cropcap;
     &sub-dbg-g-chip-ident;
     &sub-dbg-g-register;
@@ -512,7 +511,6 @@ and discussions on the V4L mailing list.</revremark>
     &sub-queryctrl;
     &sub-query-dv-preset;
     &sub-querystd;
-    &sub-prepare-buf;
     &sub-reqbufs;
     &sub-s-hw-freq-seek;
     &sub-streamon;

trunk/Documentation/block/switching-sched.txt

@@ -1,6 +1,6 @@
 To choose IO schedulers at boot time, use the argument 'elevator=deadline'.
-'noop' and 'cfq' (the default) are also available. IO schedulers are assigned
-globally at boot time only presently.
+'noop', 'as' and 'cfq' (the default) are also available. IO schedulers are
+assigned globally at boot time only presently.
 
 Each io queue has a set of io scheduler tunables associated with it. These
 tunables control how the io scheduler works. You can find these entries

trunk/Documentation/blockdev/cciss.txt

@@ -78,16 +78,6 @@ The device naming scheme is:
 /dev/cciss/c1d1p2		Controller 1, disk 1, partition 2
 /dev/cciss/c1d1p3		Controller 1, disk 1, partition 3
 
-CCISS simple mode support
--------------------------
-
-The "cciss_simple_mode=1" boot parameter may be used to prevent the driver
-from putting the controller into "performant" mode. The difference is that
-with simple mode, each command completion requires an interrupt, while with
-"performant mode" (the default, and ordinarily better performing) it is
-possible to have multiple command completions indicated by a single
-interrupt.
-
 SCSI tape drive and medium changer support
 ------------------------------------------
 

trunk/Documentation/cgroups/cgroups.txt

@@ -454,8 +454,8 @@ mounted hierarchy, to remove a task from its current cgroup you must
 move it into a new cgroup (possibly the root cgroup) by writing to the
 new cgroup's tasks file.
 
-Note: Due to some restrictions enforced by some cgroup subsystems, moving
-a process to another cgroup can fail.
+Note: If the ns cgroup is active, moving a process to another cgroup can
+fail.
 
 2.3 Mounting hierarchies by name
 --------------------------------