---

yaml
---
r: 347435
b: refs/heads/master
c: 9bffb1f
h: refs/heads/master
i:
  347433: 3b831d3
  347431: 2d8671f
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 92b2e81d6f95bcee386abac4c4389f5b950f7bb9
+refs/heads/master: 9bffb1fb7c22c96d51d4ba06e2e023dd568a5872

trunk/Documentation/devicetree/bindings/sound/cs4271.txt

@@ -18,8 +18,6 @@ Optional properties:
 
  - reset-gpio: 	a GPIO spec to define which pin is connected to the chip's
 		!RESET pin
- - cirrus,amuteb-eq-bmutec:	When given, the Codec's AMUTEB=BMUTEC flag
-				is enabled.
 
 Examples:
 

trunk/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt

@@ -12,7 +12,7 @@ Required properties:
 
 Optional properties:
 - ti,dmic: phandle for the OMAP dmic node if the machine have it connected
-- ti,jack_detection: Need to be present if the board capable to detect jack
+- ti,jack_detection: Need to be set to <1> if the board capable to detect jack
   insertion, removal.
 
 Available audio endpoints for the audio-routing table:
@@ -59,7 +59,7 @@ sound {
 	compatible = "ti,abe-twl6040";
 	ti,model = "SDP4430";
 
-	ti,jack-detection;
+	ti,jack-detection = <1>;
 	ti,mclk-freq = <38400000>;
 
 	ti,mcpdm = <&mcpdm>;

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 7
 SUBLEVEL = 0
-EXTRAVERSION = -rc7
+EXTRAVERSION =
 NAME = Terrified Chipmunk
 
 # *DOCUMENTATION*
@@ -1321,10 +1321,12 @@ kernelversion:
 
 # Clear a bunch of variables before executing the submake
 tools/: FORCE
-	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS= -C $(src)/tools/
+	$(Q)mkdir -p $(objtree)/tools
+	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS= O=$(objtree) subdir=tools -C $(src)/tools/
 
 tools/%: FORCE
-	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS= -C $(src)/tools/ $*
+	$(Q)mkdir -p $(objtree)/tools
+	$(Q)$(MAKE) LDFLAGS= MAKEFLAGS= O=$(objtree) subdir=tools -C $(src)/tools/ $*
 
 # Single targets
 # ---------------------------------------------------------------------------

trunk/arch/arm/Kconfig

@@ -547,6 +547,7 @@ config ARCH_KIRKWOOD
 	select CPU_FEROCEON
 	select GENERIC_CLOCKEVENTS
 	select PCI
+	select PCI_QUIRKS
 	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell Kirkwood series SoCs:

trunk/arch/arm/boot/compressed/head.S

@@ -652,6 +652,15 @@ __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
 		mov	pc, lr
 ENDPROC(__setup_mmu)
 
+@ Enable unaligned access on v6, to allow better code generation
+@ for the decompressor C code:
+__armv6_mmu_cache_on:
+		mrc	p15, 0, r0, c1, c0, 0	@ read SCTLR
+		bic	r0, r0, #2		@ A (no unaligned access fault)
+		orr	r0, r0, #1 << 22	@ U (v6 unaligned access model)
+		mcr	p15, 0, r0, c1, c0, 0	@ write SCTLR
+		b	__armv4_mmu_cache_on
+
 __arm926ejs_mmu_cache_on:
 #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
 		mov	r0, #4			@ put dcache in WT mode
@@ -694,6 +703,9 @@ __armv7_mmu_cache_on:
 		bic	r0, r0, #1 << 28	@ clear SCTLR.TRE
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x003c		@ write buffer
+		bic	r0, r0, #2		@ A (no unaligned access fault)
+		orr	r0, r0, #1 << 22	@ U (v6 unaligned access model)
+						@ (needed for ARM1176)
 #ifdef CONFIG_MMU
 #ifdef CONFIG_CPU_ENDIAN_BE8
 		orr	r0, r0, #1 << 25	@ big-endian page tables
@@ -914,7 +926,7 @@ proc_types:
 
 		.word	0x0007b000		@ ARMv6
 		.word	0x000ff000
-		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv6_mmu_cache_on
 		W(b)	__armv4_mmu_cache_off
 		W(b)	__armv6_mmu_cache_flush
 

trunk/arch/arm/boot/dts/at91sam9260.dtsi

@@ -29,7 +29,6 @@
 		tcb0 = &tcb0;
 		tcb1 = &tcb1;
 		i2c0 = &i2c0;
-		ssc0 = &ssc0;
 	};
 	cpus {
 		cpu@0 {
@@ -213,13 +212,6 @@
 				status = "disabled";
 			};
 
-			ssc0: ssc@fffbc000 {
-				compatible = "atmel,at91rm9200-ssc";
-				reg = <0xfffbc000 0x4000>;
-				interrupts = <14 4 5>;
-				status = "disabled";
-			};
-
 			adc0: adc@fffe0000 {
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xfffe0000 0x100>;

trunk/arch/arm/boot/dts/at91sam9263.dtsi

@@ -25,8 +25,6 @@
 		gpio4 = &pioE;
 		tcb0 = &tcb0;
 		i2c0 = &i2c0;
-		ssc0 = &ssc0;
-		ssc1 = &ssc1;
 	};
 	cpus {
 		cpu@0 {
@@ -175,20 +173,6 @@
 				status = "disabled";
 			};
 
-			ssc0: ssc@fff98000 {
-				compatible = "atmel,at91rm9200-ssc";
-				reg = <0xfff98000 0x4000>;
-				interrupts = <16 4 5>;
-				status = "disabled";
-			};
-
-			ssc1: ssc@fff9c000 {
-				compatible = "atmel,at91rm9200-ssc";
-				reg = <0xfff9c000 0x4000>;
-				interrupts = <17 4 5>;
-				status = "disabled";
-			};
-
 			macb0: ethernet@fffbc000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xfffbc000 0x100>;

trunk/arch/arm/boot/dts/at91sam9g20ek_common.dtsi

@@ -30,16 +30,6 @@
 
 	ahb {
 		apb {
-			pinctrl@fffff400 {
-				board {
-					pinctrl_pck0_as_mck: pck0_as_mck {
-						atmel,pins =
-							<2 1 0x2 0x0>;	/* PC1 periph B */
-					};
-
-				};
-			};
-
 			dbgu: serial@fffff200 {
 				status = "okay";
 			};
@@ -61,11 +51,6 @@
 				atmel,vbus-gpio = <&pioC 5 0>;
 				status = "okay";
 			};
-
-			ssc0: ssc@fffbc000 {
-				status = "okay";
-				pinctrl-0 = <&pinctrl_ssc0_tx>;
-			};
 		};
 
 		nand0: nand@40000000 {
@@ -129,7 +114,7 @@
 			reg = <0x50>;
 		};
 
-		wm8731: wm8731@1b {
+		wm8731@1b {
 			compatible = "wm8731";
 			reg = <0x1b>;
 		};
@@ -154,19 +139,4 @@
 			gpio-key,wakeup;
 		};
 	};
-
-	sound {
-		compatible = "atmel,at91sam9g20ek-wm8731-audio";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pck0_as_mck>;
-
-		atmel,model = "wm8731 @ AT91SAMG20EK";
-
-		atmel,audio-routing =
-			"Ext Spk", "LHPOUT",
-			"Int Mic", "MICIN";
-
-		atmel,ssc-controller = <&ssc0>;
-		atmel,audio-codec = <&wm8731>;
-	};
 };

trunk/arch/arm/boot/dts/at91sam9g45.dtsi

@@ -31,8 +31,6 @@
 		tcb1 = &tcb1;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
-		ssc0 = &ssc0;
-		ssc1 = &ssc1;
 	};
 	cpus {
 		cpu@0 {
@@ -228,20 +226,6 @@
 				status = "disabled";
 			};
 
-			ssc0: ssc@fff9c000 {
-				compatible = "atmel,at91sam9g45-ssc";
-				reg = <0xfff9c000 0x4000>;
-				interrupts = <16 4 5>;
-				status = "disabled";
-			};
-
-			ssc1: ssc@fffa0000 {
-				compatible = "atmel,at91sam9g45-ssc";
-				reg = <0xfffa0000 0x4000>;
-				interrupts = <17 4 5>;
-				status = "disabled";
-			};
-
 			adc0: adc@fffb0000 {
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xfffb0000 0x100>;

trunk/arch/arm/boot/dts/at91sam9x5.dtsi

@@ -30,7 +30,6 @@
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
-		ssc0 = &ssc0;
 	};
 	cpus {
 		cpu@0 {
@@ -88,13 +87,6 @@
 				interrupts = <1 4 7>;
 			};
 
-			ssc0: ssc@f0010000 {
-				compatible = "atmel,at91sam9g45-ssc";
-				reg = <0xf0010000 0x4000>;
-				interrupts = <28 4 5>;
-				status = "disabled";
-			};
-
 			tcb0: timer@f8008000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xf8008000 0x100>;

trunk/arch/arm/common/timer-sp.c

@@ -162,7 +162,6 @@ static struct clock_event_device sp804_clockevent = {
 	.set_mode	= sp804_set_mode,
 	.set_next_event	= sp804_set_next_event,
 	.rating		= 300,
-	.cpumask	= cpu_all_mask,
 };
 
 static struct irqaction sp804_timer_irq = {
@@ -185,6 +184,7 @@ void __init sp804_clockevents_init(void __iomem *base, unsigned int irq,
 	clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
 	evt->name = name;
 	evt->irq = irq;
+	evt->cpumask = cpu_possible_mask;
 
 	setup_irq(irq, &sp804_timer_irq);
 	clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);

trunk/arch/arm/mach-at91/at91rm9200.c

@@ -184,12 +184,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
 	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
 	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
-	CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk),
-	CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.2", &ssc2_clk),
-	CLKDEV_CON_DEV_ID("pclk", "fffd0000.ssc", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("pclk", "fffd4000.ssc", &ssc1_clk),
-	CLKDEV_CON_DEV_ID("pclk", "fffd8000.ssc", &ssc2_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
 	CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200.0", &twi_clk),
 	/* fake hclk clock */
 	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),

trunk/arch/arm/mach-at91/at91rm9200_devices.c

@@ -752,7 +752,7 @@ static struct resource ssc0_resources[] = {
 };
 
 static struct platform_device at91rm9200_ssc0_device = {
-	.name	= "at91rm9200_ssc",
+	.name	= "ssc",
 	.id	= 0,
 	.dev	= {
 		.dma_mask		= &ssc0_dmamask,
@@ -794,7 +794,7 @@ static struct resource ssc1_resources[] = {
 };
 
 static struct platform_device at91rm9200_ssc1_device = {
-	.name	= "at91rm9200_ssc",
+	.name	= "ssc",
 	.id	= 1,
 	.dev	= {
 		.dma_mask		= &ssc1_dmamask,
@@ -836,7 +836,7 @@ static struct resource ssc2_resources[] = {
 };
 
 static struct platform_device at91rm9200_ssc2_device = {
-	.name	= "at91rm9200_ssc",
+	.name	= "ssc",
 	.id	= 2,
 	.dev	= {
 		.dma_mask		= &ssc2_dmamask,

trunk/arch/arm/mach-at91/at91sam9260.c

@@ -210,8 +210,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
 	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
 	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
-	CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc_clk),
-	CLKDEV_CON_DEV_ID("pclk", "fffbc000.ssc", &ssc_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
 	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk),
 	CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi_clk),
 	/* more usart lookup table for DT entries */