---

yaml
---
r: 233872
b: refs/heads/master
c: 4438a02
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 4cd72c6e72e8a36a975decb53d70086008f386db
+refs/heads/master: 4438a02fc4956f5f61918095708f183f5c63a9d3

trunk/.gitignore

@@ -28,6 +28,7 @@ modules.builtin
 *.gz
 *.bz2
 *.lzma
+*.xz
 *.lzo
 *.patch
 *.gcno

trunk/Documentation/DocBook/filesystems.tmpl

@@ -82,6 +82,11 @@
      </sect1>
   </chapter>
 
+  <chapter id="fs_events">
+     <title>Events based on file descriptors</title>
+!Efs/eventfd.c
+  </chapter>
+
   <chapter id="sysfs">
      <title>The Filesystem for Exporting Kernel Objects</title>
 !Efs/sysfs/file.c

trunk/Documentation/hwmon/jc42

@@ -51,7 +51,8 @@ Supported chips:
   * JEDEC JC 42.4 compliant temperature sensor chips
     Prefix: 'jc42'
     Addresses scanned: I2C 0x18 - 0x1f
-    Datasheet: -
+    Datasheet:
+	http://www.jedec.org/sites/default/files/docs/4_01_04R19.pdf
 
 Author:
 	Guenter Roeck <guenter.roeck@ericsson.com>
@@ -60,7 +61,11 @@ Author:
 Description
 -----------
 
-This driver implements support for JEDEC JC 42.4 compliant temperature sensors.
+This driver implements support for JEDEC JC 42.4 compliant temperature sensors,
+which are used on many DDR3 memory modules for mobile devices and servers. Some
+systems use the sensor to prevent memory overheating by automatically throttling
+the memory controller.
+
 The driver auto-detects the chips listed above, but can be manually instantiated
 to support other JC 42.4 compliant chips.
 
@@ -81,15 +86,19 @@ limits. The chip supports only a single register to configure the hysteresis,
 which applies to all limits. This register can be written by writing into
 temp1_crit_hyst. Other hysteresis attributes are read-only.
 
+If the BIOS has configured the sensor for automatic temperature management, it
+is likely that it has locked the registers, i.e., that the temperature limits
+cannot be changed.
+
 Sysfs entries
 -------------
 
 temp1_input		Temperature (RO)
-temp1_min		Minimum temperature (RW)
-temp1_max		Maximum temperature (RW)
-temp1_crit		Critical high temperature (RW)
+temp1_min		Minimum temperature (RO or RW)
+temp1_max		Maximum temperature (RO or RW)
+temp1_crit		Critical high temperature (RO or RW)
 
-temp1_crit_hyst		Critical hysteresis temperature (RW)
+temp1_crit_hyst		Critical hysteresis temperature (RO or RW)
 temp1_max_hyst		Maximum hysteresis temperature (RO)
 
 temp1_min_alarm		Temperature low alarm

trunk/Documentation/hwmon/k10temp

@@ -9,6 +9,8 @@ Supported chips:
   Socket S1G3: Athlon II, Sempron, Turion II
 * AMD Family 11h processors:
   Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra)
+* AMD Family 12h processors: "Llano"
+* AMD Family 14h processors: "Brazos" (C/E/G-Series)
 
   Prefix: 'k10temp'
   Addresses scanned: PCI space
@@ -17,10 +19,14 @@ Supported chips:
     http://support.amd.com/us/Processor_TechDocs/31116.pdf
   BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41256.pdf
+  BIOS and Kernel Developer's Guide (BKDG) for AMD Family 14h Models 00h-0Fh Processors:
+    http://support.amd.com/us/Processor_TechDocs/43170.pdf
   Revision Guide for AMD Family 10h Processors:
     http://support.amd.com/us/Processor_TechDocs/41322.pdf
   Revision Guide for AMD Family 11h Processors:
     http://support.amd.com/us/Processor_TechDocs/41788.pdf
+  Revision Guide for AMD Family 14h Models 00h-0Fh Processors:
+    http://support.amd.com/us/Processor_TechDocs/47534.pdf
   AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks:
     http://support.amd.com/us/Processor_TechDocs/43373.pdf
   AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet:
@@ -34,7 +40,7 @@ Description
 -----------
 
 This driver permits reading of the internal temperature sensor of AMD
-Family 10h and 11h processors.
+Family 10h/11h/12h/14h processors.
 
 All these processors have a sensor, but on those for Socket F or AM2+,
 the sensor may return inconsistent values (erratum 319).  The driver

trunk/Documentation/kernel-parameters.txt

@@ -144,6 +144,11 @@ a fixed number of characters. This limit depends on the architecture
 and is between 256 and 4096 characters. It is defined in the file
 ./include/asm/setup.h as COMMAND_LINE_SIZE.
 
+Finally, the [KMG] suffix is commonly described after a number of kernel
+parameter values. These 'K', 'M', and 'G' letters represent the _binary_
+multipliers 'Kilo', 'Mega', and 'Giga', equalling 2^10, 2^20, and 2^30
+bytes respectively. Such letter suffixes can also be entirely omitted.
+
 
 	acpi=		[HW,ACPI,X86]
 			Advanced Configuration and Power Interface
@@ -545,16 +550,20 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format:
 			<first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
 
-	crashkernel=nn[KMG]@ss[KMG]
-			[KNL] Reserve a chunk of physical memory to
-			hold a kernel to switch to with kexec on panic.
+	crashkernel=size[KMG][@offset[KMG]]
+			[KNL] Using kexec, Linux can switch to a 'crash kernel'
+			upon panic. This parameter reserves the physical
+			memory region [offset, offset + size] for that kernel
+			image. If '@offset' is omitted, then a suitable offset
+			is selected automatically. Check
+			Documentation/kdump/kdump.txt for further details.
 
 	crashkernel=range1:size1[,range2:size2,...][@offset]
 			[KNL] Same as above, but depends on the memory
 			in the running system. The syntax of range is
 			start-[end] where start and end are both
 			a memory unit (amount[KMG]). See also
-			Documentation/kdump/kdump.txt for a example.
+			Documentation/kdump/kdump.txt for an example.
 
 	cs89x0_dma=	[HW,NET]
 			Format: <dma>
@@ -1262,10 +1271,9 @@ and is between 256 and 4096 characters. It is defined in the file
 			6 (KERN_INFO)		informational
 			7 (KERN_DEBUG)		debug-level messages
 
-	log_buf_len=n	Sets the size of the printk ring buffer, in bytes.
-			Format: { n | nk | nM }
-			n must be a power of two.  The default size
-			is set in the kernel config file.
+	log_buf_len=n[KMG]	Sets the size of the printk ring buffer,
+			in bytes.  n must be a power of two.  The default
+			size is set in the kernel config file.
 
 	logo.nologo	[FB] Disables display of the built-in Linux logo.
 			This may be used to provide more screen space for

trunk/MAINTAINERS

@@ -885,7 +885,7 @@ S:	Supported
 
 ARM/QUALCOMM MSM MACHINE SUPPORT
 M:	David Brown <davidb@codeaurora.org>
-M:	Daniel Walker <dwalker@codeaurora.org>
+M:	Daniel Walker <dwalker@fifo99.com>
 M:	Bryan Huntsman <bryanh@codeaurora.org>
 L:	linux-arm-msm@vger.kernel.org
 F:	arch/arm/mach-msm/
@@ -1693,6 +1693,13 @@ M:	Andy Whitcroft <apw@canonical.com>
 S:	Supported
 F:	scripts/checkpatch.pl
 
+CHINESE DOCUMENTATION
+M:	Harry Wei <harryxiyou@gmail.com>
+L:	xiyoulinuxkernelgroup@googlegroups.com
+L:	linux-kernel@zh-kernel.org (moderated for non-subscribers)
+S:	Maintained
+F:	Documentation/zh_CN/
+
 CISCO VIC ETHERNET NIC DRIVER
 M:	Vasanthy Kolluri <vkolluri@cisco.com>
 M:	Roopa Prabhu <roprabhu@cisco.com>
@@ -2874,7 +2881,6 @@ M:	Guenter Roeck <guenter.roeck@ericsson.com>
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
-T:	quilt kernel.org/pub/linux/kernel/people/groeck/linux-staging/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
 S:	Maintained
 F:	Documentation/hwmon/
@@ -5268,7 +5274,7 @@ S:	Maintained
 F:	drivers/net/wireless/rtl818x/rtl8180/
 
 RTL8187 WIRELESS DRIVER
-M:	Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+M:	Herton Ronaldo Krzesinski <herton@canonical.com>
 M:	Hin-Tak Leung <htl10@users.sourceforge.net>
 M:	Larry Finger <Larry.Finger@lwfinger.net>
 L:	linux-wireless@vger.kernel.org
@@ -6106,7 +6112,7 @@ S:	Maintained
 F:	security/tomoyo/
 
 TOPSTAR LAPTOP EXTRAS DRIVER
-M:	Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+M:	Herton Ronaldo Krzesinski <herton@canonical.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/topstar-laptop.c

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 38
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc7
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*

trunk/arch/alpha/Kconfig

@@ -11,6 +11,7 @@ config ALPHA
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_PROBE
 	select AUTO_IRQ_AFFINITY if SMP
+	select GENERIC_HARDIRQS_NO_DEPRECATED
 	help
 	  The Alpha is a 64-bit general-purpose processor designed and
 	  marketed by the Digital Equipment Corporation of blessed memory,

trunk/arch/alpha/kernel/irq.c

@@ -44,20 +44,25 @@ static char irq_user_affinity[NR_IRQS];
 
 int irq_select_affinity(unsigned int irq)
 {
-	struct irq_desc *desc = irq_to_desc[irq];
+	struct irq_data *data = irq_get_irq_data(irq);
+	struct irq_chip *chip;
 	static int last_cpu;
 	int cpu = last_cpu + 1;
 
-	if (!desc || !get_irq_desc_chip(desc)->set_affinity || irq_user_affinity[irq])
+	if (!data)
+		return 1;
+	chip = irq_data_get_irq_chip(data);
+
+	if (!chip->irq_set_affinity || irq_user_affinity[irq])
 		return 1;
 
 	while (!cpu_possible(cpu) ||
 	       !cpumask_test_cpu(cpu, irq_default_affinity))
 		cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0);
 	last_cpu = cpu;
 
-	cpumask_copy(desc->affinity, cpumask_of(cpu));
-	get_irq_desc_chip(desc)->set_affinity(irq, cpumask_of(cpu));
+	cpumask_copy(data->affinity, cpumask_of(cpu));
+	chip->irq_set_affinity(data, cpumask_of(cpu), false);
 	return 0;
 }
 #endif /* CONFIG_SMP */

trunk/arch/alpha/kernel/irq_alpha.c

@@ -228,14 +228,9 @@ struct irqaction timer_irqaction = {
 void __init
 init_rtc_irq(void)
 {
-	struct irq_desc *desc = irq_to_desc(RTC_IRQ);
-
-	if (desc) {
-		desc->status |= IRQ_DISABLED;
-		set_irq_chip_and_handler_name(RTC_IRQ, &no_irq_chip,
-			handle_simple_irq, "RTC");
-		setup_irq(RTC_IRQ, &timer_irqaction);
-	}
+	set_irq_chip_and_handler_name(RTC_IRQ, &no_irq_chip,
+				      handle_simple_irq, "RTC");
+	setup_irq(RTC_IRQ, &timer_irqaction);
 }
 
 /* Dummy irqactions.  */

trunk/arch/alpha/kernel/irq_i8259.c

@@ -33,10 +33,10 @@ i8259_update_irq_hw(unsigned int irq, unsigned long mask)
 }
 
 inline void
-i8259a_enable_irq(unsigned int irq)
+i8259a_enable_irq(struct irq_data *d)
 {
 	spin_lock(&i8259_irq_lock);
-	i8259_update_irq_hw(irq, cached_irq_mask &= ~(1 << irq));
+	i8259_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq));
 	spin_unlock(&i8259_irq_lock);
 }
 
@@ -47,16 +47,18 @@ __i8259a_disable_irq(unsigned int irq)
 }
 
 void
-i8259a_disable_irq(unsigned int irq)
+i8259a_disable_irq(struct irq_data *d)
 {
 	spin_lock(&i8259_irq_lock);
-	__i8259a_disable_irq(irq);
+	__i8259a_disable_irq(d->irq);
 	spin_unlock(&i8259_irq_lock);
 }
 
 void
-i8259a_mask_and_ack_irq(unsigned int irq)
+i8259a_mask_and_ack_irq(struct irq_data *d)
 {
+	unsigned int irq = d->irq;
+
 	spin_lock(&i8259_irq_lock);
 	__i8259a_disable_irq(irq);
 
@@ -71,9 +73,9 @@ i8259a_mask_and_ack_irq(unsigned int irq)
 
 struct irq_chip i8259a_irq_type = {
 	.name		= "XT-PIC",
-	.unmask		= i8259a_enable_irq,
-	.mask		= i8259a_disable_irq,
-	.mask_ack	= i8259a_mask_and_ack_irq,
+	.irq_unmask	= i8259a_enable_irq,
+	.irq_mask	= i8259a_disable_irq,
+	.irq_mask_ack	= i8259a_mask_and_ack_irq,
 };
 
 void __init

trunk/arch/alpha/kernel/irq_impl.h

@@ -31,11 +31,9 @@ extern void init_rtc_irq(void);
 
 extern void common_init_isa_dma(void);
 
-extern void i8259a_enable_irq(unsigned int);
-extern void i8259a_disable_irq(unsigned int);
-extern void i8259a_mask_and_ack_irq(unsigned int);
-extern unsigned int i8259a_startup_irq(unsigned int);
-extern void i8259a_end_irq(unsigned int);
+extern void i8259a_enable_irq(struct irq_data *d);
+extern void i8259a_disable_irq(struct irq_data *d);
+extern void i8259a_mask_and_ack_irq(struct irq_data *d);
 extern struct irq_chip i8259a_irq_type;
 extern void init_i8259a_irqs(void);
 

trunk/arch/alpha/kernel/irq_pyxis.c

@@ -29,21 +29,21 @@ pyxis_update_irq_hw(unsigned long mask)
 }
 
 static inline void
-pyxis_enable_irq(unsigned int irq)
+pyxis_enable_irq(struct irq_data *d)
 {
-	pyxis_update_irq_hw(cached_irq_mask |= 1UL << (irq - 16));
+	pyxis_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16));
 }
 
 static void
-pyxis_disable_irq(unsigned int irq)
+pyxis_disable_irq(struct irq_data *d)
 {
-	pyxis_update_irq_hw(cached_irq_mask &= ~(1UL << (irq - 16)));
+	pyxis_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16)));
 }
 
 static void
-pyxis_mask_and_ack_irq(unsigned int irq)
+pyxis_mask_and_ack_irq(struct irq_data *d)
 {
-	unsigned long bit = 1UL << (irq - 16);
+	unsigned long bit = 1UL << (d->irq - 16);
 	unsigned long mask = cached_irq_mask &= ~bit;
 
 	/* Disable the interrupt.  */
@@ -58,9 +58,9 @@ pyxis_mask_and_ack_irq(unsigned int irq)
 
 static struct irq_chip pyxis_irq_type = {
 	.name		= "PYXIS",
-	.mask_ack	= pyxis_mask_and_ack_irq,
-	.mask		= pyxis_disable_irq,
-	.unmask		= pyxis_enable_irq,
+	.irq_mask_ack	= pyxis_mask_and_ack_irq,
+	.irq_mask	= pyxis_disable_irq,
+	.irq_unmask	= pyxis_enable_irq,
 };
 
 void 
@@ -103,7 +103,7 @@ init_pyxis_irqs(unsigned long ignore_mask)
 		if ((ignore_mask >> i) & 1)
 			continue;
 		set_irq_chip_and_handler(i, &pyxis_irq_type, handle_level_irq);
-		irq_to_desc(i)->status |= IRQ_LEVEL;
+		irq_set_status_flags(i, IRQ_LEVEL);
 	}
 
 	setup_irq(16+7, &isa_cascade_irqaction);