[PATCH] IB/ipath: fix lost interrupts on HT-400

Do an extra check to see if in-memory tail changed while processing packets,
and if so, going back through the loop again (but only once per call to
ipath_kreceive()).  In practice, this seems to be enough to guarantee that if
we crossed the clearing of an interrupt at start of ipath_intr with a
scheduled tail register update, that we'll process the "extra" packet that
lost the interrupt because we cleared it just as it was about to arrive.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

drivers/infiniband/hw/ipath/ipath_driver.c

@@ -870,7 +870,7 @@ void ipath_kreceive(struct ipath_devdata *dd)
 	const u32 maxcnt = dd->ipath_rcvhdrcnt * rsize;	/* words */
 	u32 etail = -1, l, hdrqtail;
 	struct ips_message_header *hdr;
-	u32 eflags, i, etype, tlen, pkttot = 0, updegr=0;
+	u32 eflags, i, etype, tlen, pkttot = 0, updegr=0, reloop=0;
 	static u64 totcalls;	/* stats, may eventually remove */
 	char emsg[128];
 
@@ -885,9 +885,11 @@ void ipath_kreceive(struct ipath_devdata *dd)
 		goto bail;
 
 	l = dd->ipath_port0head;
-	if (l == (u32)le64_to_cpu(*dd->ipath_hdrqtailptr))
+	hdrqtail = (u32) le64_to_cpu(*dd->ipath_hdrqtailptr);
+	if (l == hdrqtail)
 		goto done;
 
+reloop:
 	/* read only once at start for performance */
 	hdrqtail = (u32)le64_to_cpu(*dd->ipath_hdrqtailptr);
 
@@ -1011,7 +1013,7 @@ void ipath_kreceive(struct ipath_devdata *dd)
 		 */
 		if (l == hdrqtail || (i && !(i&0xf))) {
 			u64 lval;
-			if (l == hdrqtail) /* want interrupt only on last */
+			if (l == hdrqtail) /* PE-800 interrupt only on last */
 				lval = dd->ipath_rhdrhead_intr_off | l;
 			else
 				lval = l;
@@ -1024,6 +1026,23 @@ void ipath_kreceive(struct ipath_devdata *dd)
 		}
 	}
 
+	if (!dd->ipath_rhdrhead_intr_off && !reloop) {
+		/* HT-400 workaround; we can have a race clearing chip
+		 * interrupt with another interrupt about to be delivered,
+		 * and can clear it before it is delivered on the GPIO
+		 * workaround.  By doing the extra check here for the
+		 * in-memory tail register updating while we were doing
+		 * earlier packets, we "almost" guarantee we have covered
+		 * that case.
+		 */
+		u32 hqtail = (u32)le64_to_cpu(*dd->ipath_hdrqtailptr);
+		if (hqtail != hdrqtail) {
+			hdrqtail = hqtail;
+			reloop = 1; /* loop 1 extra time at most */
+			goto reloop;
+		}
+	}
+
 	pkttot += i;
 
 	dd->ipath_port0head = l;

drivers/infiniband/hw/ipath/ipath_intr.c

@@ -766,7 +766,7 @@ irqreturn_t ipath_intr(int irq, void *data, struct pt_regs *regs)
 	u32 istat, chk0rcv = 0;
 	ipath_err_t estat = 0;
 	irqreturn_t ret;
-	u32 p0bits, oldhead;
+	u32 oldhead, curtail;
 	static unsigned unexpected = 0;
 	static const u32 port0rbits = (1U<<INFINIPATH_I_RCVAVAIL_SHIFT) |
 		 (1U<<INFINIPATH_I_RCVURG_SHIFT);
@@ -809,15 +809,16 @@ irqreturn_t ipath_intr(int irq, void *data, struct pt_regs *regs)
 	 * lose intr for later packets that arrive while we are processing.
 	 */
 	oldhead = dd->ipath_port0head;
-	if (oldhead != (u32) le64_to_cpu(*dd->ipath_hdrqtailptr)) {
+	curtail = (u32)le64_to_cpu(*dd->ipath_hdrqtailptr);
+	if (oldhead != curtail) {
 		if (dd->ipath_flags & IPATH_GPIO_INTR) {
 			ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_clear,
 					 (u64) (1 << 2));
-			p0bits = port0rbits | INFINIPATH_I_GPIO;
+			istat = port0rbits | INFINIPATH_I_GPIO;
 		}
 		else
-			p0bits = port0rbits;
-		ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, p0bits);
+			istat = port0rbits;
+		ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, istat);
 		ipath_kreceive(dd);
 		if (oldhead != dd->ipath_port0head) {
 			ipath_stats.sps_fastrcvint++;
@@ -827,7 +828,6 @@ irqreturn_t ipath_intr(int irq, void *data, struct pt_regs *regs)
 	}
 
 	istat = ipath_read_kreg32(dd, dd->ipath_kregs->kr_intstatus);
-	p0bits = port0rbits;
 
 	if (unlikely(!istat)) {
 		ipath_stats.sps_nullintr++;
@@ -890,19 +890,19 @@ irqreturn_t ipath_intr(int irq, void *data, struct pt_regs *regs)
 		else {
 			/* Clear GPIO status bit 2 */
 			ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_clear,
-					 (u64) (1 << 2));
-			p0bits |= INFINIPATH_I_GPIO;
+					(u64) (1 << 2));
 			chk0rcv = 1;
 		}
 	}
-	chk0rcv |= istat & p0bits;
+	chk0rcv |= istat & port0rbits;
 
 	/*
-	 * clear the ones we will deal with on this round
-	 * We clear it early, mostly for receive interrupts, so we
-	 * know the chip will have seen this by the time we process
-	 * the queue, and will re-interrupt if necessary.  The processor
-	 * itself won't take the interrupt again until we return.
+	 * Clear the interrupt bits we found set, unless they are receive
+	 * related, in which case we already cleared them above, and don't
+	 * want to clear them again, because we might lose an interrupt.
+	 * Clear it early, so we "know" know the chip will have seen this by
+	 * the time we process the queue, and will re-interrupt if necessary.
+	 * The processor itself won't take the interrupt again until we return.
 	 */
 	ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, istat);