---

yaml
---
r: 133355
b: refs/heads/master
c: 7610c4f
h: refs/heads/master
i:
  133353: 808a351
  133351: cc82143
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 928a726b0e12184729900c076e13dbf1c511c96c
+refs/heads/master: 7610c4f5efc495d8e15ef608c4a66932f895379a

trunk/Documentation/DocBook/Makefile

@@ -12,8 +12,7 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
 	    kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
 	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
 	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
-	    mac80211.xml debugobjects.xml sh.xml regulator.xml \
-	    alsa-driver-api.xml writing-an-alsa-driver.xml
+	    mac80211.xml debugobjects.xml sh.xml regulator.xml
 
 ###
 # The build process is as follows (targets):

trunk/Documentation/cpu-freq/governors.txt

@@ -117,28 +117,10 @@ accessible parameters:
 sampling_rate: measured in uS (10^-6 seconds), this is how often you
 want the kernel to look at the CPU usage and to make decisions on
 what to do about the frequency.  Typically this is set to values of
-around '10000' or more. It's default value is (cmp. with users-guide.txt):
-transition_latency * 1000
-The lowest value you can set is:
-transition_latency * 100 or it may get restricted to a value where it
-makes not sense for the kernel anymore to poll that often which depends
-on your HZ config variable (HZ=1000: max=20000us, HZ=250: max=5000).
-Be aware that transition latency is in ns and sampling_rate is in us, so you
-get the same sysfs value by default.
-Sampling rate should always get adjusted considering the transition latency
-To set the sampling rate 750 times as high as the transition latency
-in the bash (as said, 1000 is default), do:
-echo `$(($(cat cpuinfo_transition_latency) * 750 / 1000)) \
-    >ondemand/sampling_rate
-
-show_sampling_rate_(min|max): THIS INTERFACE IS DEPRECATED, DON'T USE IT.
-You can use wider ranges now and the general
-cpuinfo_transition_latency variable (cmp. with user-guide.txt) can be
-used to obtain exactly the same info:
-show_sampling_rate_min = transtition_latency * 500    / 1000
-show_sampling_rate_max = transtition_latency * 500000 / 1000
-(divided by 1000 is to illustrate that sampling rate is in us and
-transition latency is exported ns).
+around '10000' or more.
+
+show_sampling_rate_(min|max): the minimum and maximum sampling rates
+available that you may set 'sampling_rate' to.
 
 up_threshold: defines what the average CPU usage between the samplings
 of 'sampling_rate' needs to be for the kernel to make a decision on

trunk/Documentation/cpu-freq/user-guide.txt

@@ -152,18 +152,6 @@ cpuinfo_min_freq :		this file shows the minimum operating
 				frequency the processor can run at(in kHz) 
 cpuinfo_max_freq :		this file shows the maximum operating
 				frequency the processor can run at(in kHz) 
-cpuinfo_transition_latency	The time it takes on this CPU to
-				switch between two frequencies in nano
-				seconds. If unknown or known to be
-				that high that the driver does not
-				work with the ondemand governor, -1
-				(CPUFREQ_ETERNAL) will be returned.
-				Using this information can be useful
-				to choose an appropriate polling
-				frequency for a kernel governor or
-				userspace daemon. Make sure to not
-				switch the frequency too often
-				resulting in performance loss.
 scaling_driver :		this file shows what cpufreq driver is
 				used to set the frequency on this CPU
 

trunk/Documentation/kernel-parameters.txt

@@ -44,7 +44,6 @@ parameter is applicable:
 	FB	The frame buffer device is enabled.
 	HW	Appropriate hardware is enabled.
 	IA-64	IA-64 architecture is enabled.
-	IMA     Integrity measurement architecture is enabled.
 	IOSCHED	More than one I/O scheduler is enabled.
 	IP_PNP	IP DHCP, BOOTP, or RARP is enabled.
 	ISAPNP	ISA PnP code is enabled.
@@ -903,15 +902,6 @@ and is between 256 and 4096 characters. It is defined in the file
 	ihash_entries=	[KNL]
 			Set number of hash buckets for inode cache.
 
-	ima_audit=	[IMA]
-			Format: { "0" | "1" }
-			0 -- integrity auditing messages. (Default)
-			1 -- enable informational integrity auditing messages.
-
-	ima_hash=	[IMA]
-			Formt: { "sha1" | "md5" }
-			default: "sha1"
-
 	in2000=		[HW,SCSI]
 			See header of drivers/scsi/in2000.c.
 

trunk/Documentation/sound/alsa/ALSA-Configuration.txt

@@ -346,9 +346,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     sbirq	- IRQ # for CMI8330 chip (SB16)
     sbdma8	- 8bit DMA # for CMI8330 chip (SB16)
     sbdma16	- 16bit DMA # for CMI8330 chip (SB16)
-    fmport	- (optional) OPL3 I/O port
-    mpuport	- (optional) MPU401 I/O port
-    mpuirq	- (optional) MPU401 irq #
 
     This module supports multiple cards and autoprobe.
 
@@ -391,11 +388,34 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
 
+  Module snd-cs4232
+  -----------------
+
+    Module for sound cards based on CS4232/CS4232A ISA chips.
+
+    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
+
+    with isapnp=0, the following options are available:
+
+    port	- port # for CS4232 chip (PnP setup - 0x534)
+    cport	- control port # for CS4232 chip (PnP setup - 0x120,0x210,0xf00)
+    mpu_port	- port # for MPU-401 UART (PnP setup - 0x300), -1 = disable
+    fm_port	- FM port # for CS4232 chip (PnP setup - 0x388), -1 = disable
+    irq		- IRQ # for CS4232 chip (5,7,9,11,12,15)
+    mpu_irq	- IRQ # for MPU-401 UART (9,11,12,15)
+    dma1	- first DMA # for CS4232 chip (0,1,3)
+    dma2	- second DMA # for Yamaha CS4232 chip (0,1,3), -1 = disable
+
+    This module supports multiple cards. This module does not support autoprobe
+    (if ISA PnP is not used) thus main port must be specified!!! Other ports are
+    optional.
+
+    The power-management is supported.
+
   Module snd-cs4236
   -----------------
 
-    Module for sound cards based on CS4232/CS4232A,
-    	       	     	   	   CS4235/CS4236/CS4236B/CS4237B/
+    Module for sound cards based on CS4235/CS4236/CS4236B/CS4237B/
                                    CS4238B/CS4239 ISA chips.
 
     isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
@@ -417,9 +437,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
 
-    This module is aliased as snd-cs4232 since it provides the old
-    snd-cs4232 functionality, too.
-
   Module snd-cs4281
   -----------------
 
@@ -589,7 +606,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     Module for ESS AudioDrive ES-1688 and ES-688 sound cards.
 
     port	- port # for ES-1688 chip (0x220,0x240,0x260)
-    fm_port	- port # for OPL3 (option; share the same port as default)
     mpu_port	- port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
     irq		- IRQ # for ES-1688 chip (5,7,9,10)
     mpu_irq	- IRQ # for MPU-401 port (5,7,9,10)
@@ -741,9 +757,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     model	- force the model name
     position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF)
     probe_mask  - Bitmask to probe codecs (default = -1, meaning all slots)
-    		  When the bit 8 (0x100) is set, the lower 8 bits are used
-		  as the "fixed" codec slots; i.e. the driver probes the
-		  slots regardless what hardware reports back
     probe_only	- Only probing and no codec initialization (default=off);
 		  Useful to check the initial codec status for debugging
     bdl_pos_adj	- Specifies the DMA IRQ timing delay in samples.
@@ -1172,54 +1185,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     This module supports multiple devices and PnP.
 
-  Module snd-msnd-classic
-  -----------------------
-
-    Module for Turtle Beach MultiSound Classic, Tahiti or Monterey
-    soundcards.
-
-    io		- Port # for msnd-classic card
-    irq		- IRQ # for msnd-classic card
-    mem		- Memory address (0xb0000, 0xc8000, 0xd0000, 0xd8000,
-		  0xe0000 or 0xe8000)
-    write_ndelay - enable write ndelay (default = 1)
-    calibrate_signal - calibrate signal (default = 0)
-    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
-    digital	- Digital daughterboard present (default = 0)
-    cfg		- Config port (0x250, 0x260 or 0x270) default = PnP
-    reset	- Reset all devices
-    mpu_io	- MPU401 I/O port
-    mpu_irq	- MPU401 irq#
-    ide_io0	- IDE port #0
-    ide_io1	- IDE port #1
-    ide_irq	- IDE irq#
-    joystick_io	- Joystick I/O port
-
-    The driver requires firmware files "turtlebeach/msndinit.bin" and
-    "turtlebeach/msndperm.bin" in the proper firmware directory.
-
-    See Documentation/sound/oss/MultiSound for important information
-    about this driver.  Note that it has been discontinued, but the 
-    Voyetra Turtle Beach knowledge base entry for it is still available
-    at
-	http://www.turtlebeach.com/site/kb_ftp/790.asp
-
-  Module snd-msnd-pinnacle
-  ------------------------
-
-    Module for Turtle Beach MultiSound Pinnacle/Fiji soundcards.
-
-    io		- Port # for pinnacle/fiji card
-    irq		- IRQ # for pinnalce/fiji card
-    mem		- Memory address (0xb0000, 0xc8000, 0xd0000, 0xd8000,
-		  0xe0000 or 0xe8000)
-    write_ndelay - enable write ndelay (default = 1)
-    calibrate_signal - calibrate signal (default = 0)
-    isapnp	- ISA PnP detection - 0 = disable, 1 = enable (default)
-
-    The driver requires firmware files "turtlebeach/pndspini.bin" and
-    "turtlebeach/pndsperm.bin" in the proper firmware directory.
-
   Module snd-mtpav
   ----------------
 
@@ -1859,7 +1824,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   -------------------
 
     Module for sound cards based on the Asus AV100/AV200 chips,
-    i.e., Xonar D1, DX, D2, D2X, HDAV1.3 (Deluxe), and Essence STX.
+    i.e., Xonar D1, DX, D2, D2X and HDAV1.3 (Deluxe).
 
     This module supports autoprobe and multiple cards.
 

trunk/Documentation/DocBook/alsa-driver-api.tmpl → trunk/Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl

@@ -1,11 +1,11 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
-	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
+
+<book>
+<?dbhtml filename="index.html">
 
 <!-- ****************************************************** -->
 <!-- Header  -->
 <!-- ****************************************************** -->
-<book id="ALSA-Driver-API">
   <bookinfo>
     <title>The ALSA Driver API</title>
 
@@ -35,8 +35,6 @@
 
   </bookinfo>
 
-<toc></toc>
-
   <chapter><title>Management of Cards and Devices</title>
      <sect1><title>Card Management</title>
 !Esound/core/init.c
@@ -73,10 +71,6 @@
 !Esound/pci/ac97/ac97_codec.c
 !Esound/pci/ac97/ac97_pcm.c
      </sect1>
-     <sect1><title>Virtual Master Control API</title>
-!Esound/core/vmaster.c
-!Iinclude/sound/control.h
-     </sect1>
   </chapter>
   <chapter><title>MIDI API</title>
      <sect1><title>Raw MIDI API</title>
@@ -94,9 +88,6 @@
   <chapter><title>Miscellaneous Functions</title>
      <sect1><title>Hardware-Dependent Devices API</title>
 !Esound/core/hwdep.c
-     </sect1>
-     <sect1><title>Jack Abstraction Layer API</title>
-!Esound/core/jack.c
      </sect1>
      <sect1><title>ISA DMA Helpers</title>
 !Esound/core/isadma.c