---

yaml
---
r: 222170
b: refs/heads/master
c: aae6d3d
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 1e8703b2e6aefba84dd9633d90a4093ff1200b93
+refs/heads/master: aae6d3ddd8b90f5b2c8d79a2b914d1706d124193

trunk/Documentation/arm/OMAP/DSS

@@ -255,10 +255,9 @@ framebuffer parameters.
 Kernel boot arguments
 ---------------------
 
-vram=<size>[,<physaddr>]
-	- Amount of total VRAM to preallocate and optionally a physical start
-	  memory address. For example, "10M". omapfb allocates memory for
-	  framebuffers from VRAM.
+vram=<size>
+	- Amount of total VRAM to preallocate. For example, "10M". omapfb
+	  allocates memory for framebuffers from VRAM.
 
 omapfb.mode=<display>:<mode>[,...]
 	- Default video mode for specified displays. For example,

trunk/Documentation/block/switching-sched.txt

@@ -16,7 +16,7 @@ you can do so by typing:
 As of the Linux 2.6.10 kernel, it is now possible to change the
 IO scheduler for a given block device on the fly (thus making it possible,
 for instance, to set the CFQ scheduler for the system default, but
-set a specific device to use the deadline or noop schedulers - which
+set a specific device to use the anticipatory or noop schedulers - which
 can improve that device's throughput).
 
 To set a specific scheduler, simply do this:
@@ -31,7 +31,7 @@ a "cat /sys/block/DEV/queue/scheduler" - the list of valid names
 will be displayed, with the currently selected scheduler in brackets:
 
 # cat /sys/block/hda/queue/scheduler
-noop deadline [cfq]
-# echo deadline > /sys/block/hda/queue/scheduler
+noop anticipatory deadline [cfq]
+# echo anticipatory > /sys/block/hda/queue/scheduler
 # cat /sys/block/hda/queue/scheduler
-noop [deadline] cfq
+noop [anticipatory] deadline cfq

trunk/Documentation/feature-removal-schedule.txt

@@ -554,13 +554,3 @@ Why:    This is a legacy interface which have been replaced by a more
 Who:    NeilBrown <neilb@suse.de>
 
 ----------------------------
-
-What:	i2c_adapter.id
-When:	June 2011
-Why:	This field is deprecated. I2C device drivers shouldn't change their
-	behavior based on the underlying I2C adapter. Instead, the I2C
-	adapter driver should instantiate the I2C devices and provide the
-	needed platform-specific information.
-Who:	Jean Delvare <khali@linux-fr.org>
-
-----------------------------

trunk/Documentation/filesystems/xfs-delayed-logging-design.txt

@@ -794,6 +794,17 @@ designed.
 
 Roadmap:
 
+2.6.37 Remove experimental tag from mount option
+	=> should be roughly 6 months after initial merge
+	=> enough time to:
+		=> gain confidence and fix problems reported by early
+		   adopters (a.k.a. guinea pigs)
+		=> address worst performance regressions and undesired
+		   behaviours
+		=> start tuning/optimising code for parallelism
+		=> start tuning/optimising algorithms consuming
+		   excessive CPU time
+
 2.6.39 Switch default mount option to use delayed logging
 	=> should be roughly 12 months after initial merge
 	=> enough time to shake out remaining problems before next round of

trunk/Documentation/kernel-parameters.txt

@@ -706,7 +706,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			arch/x86/kernel/cpu/cpufreq/elanfreq.c.
 
 	elevator=	[IOSCHED]
-			Format: {"cfq" | "deadline" | "noop"}
+			Format: {"anticipatory" | "cfq" | "deadline" | "noop"}
 			See Documentation/block/as-iosched.txt and
 			Documentation/block/deadline-iosched.txt for details.
 

trunk/Documentation/leds-class.txt

@@ -60,18 +60,15 @@ Hardware accelerated blink of LEDs
 
 Some LEDs can be programmed to blink without any CPU interaction. To
 support this feature, a LED driver can optionally implement the
-blink_set() function (see <linux/leds.h>). To set an LED to blinking,
-however, it is better to use use the API function led_blink_set(),
-as it will check and implement software fallback if necessary.
-
-To turn off blinking again, use the API function led_brightness_set()
-as that will not just set the LED brightness but also stop any software
-timers that may have been required for blinking.
-
-The blink_set() function should choose a user friendly blinking value
-if it is called with *delay_on==0 && *delay_off==0 parameters. In this
-case the driver should give back the chosen value through delay_on and
-delay_off parameters to the leds subsystem.
+blink_set() function (see <linux/leds.h>). If implemented, triggers can
+attempt to use it before falling back to software timers. The blink_set()
+function should return 0 if the blink setting is supported, or -EINVAL
+otherwise, which means that LED blinking will be handled by software.
+
+The blink_set() function should choose a user friendly blinking
+value if it is called with *delay_on==0 && *delay_off==0 parameters. In
+this case the driver should give back the chosen value through delay_on
+and delay_off parameters to the leds subsystem.
 
 Setting the brightness to zero with brightness_set() callback function
 should completely turn off the LED and cancel the previously programmed

trunk/Documentation/networking/ip-sysctl.txt

@@ -20,15 +20,6 @@ ip_no_pmtu_disc - BOOLEAN
 min_pmtu - INTEGER
 	default 562 - minimum discovered Path MTU
 
-route/max_size - INTEGER
-	Maximum number of routes allowed in the kernel.  Increase
-	this when using large numbers of interfaces and/or routes.
-
-neigh/default/gc_thresh3 - INTEGER
-	Maximum number of neighbor entries allowed.  Increase this
-	when using large numbers of interfaces and when communicating
-	with large numbers of directly-connected peers.
-
 mtu_expires - INTEGER
 	Time, in seconds, that cached PMTU information is kept.
 

trunk/Documentation/power/opp.txt

@@ -37,9 +37,6 @@ Typical usage of the OPP library is as follows:
 SoC framework	-> modifies on required cases certain OPPs	-> OPP layer
 		-> queries to search/retrieve information	->
 
-Architectures that provide a SoC framework for OPP should select ARCH_HAS_OPP
-to make the OPP layer available.
-
 OPP layer expects each domain to be represented by a unique device pointer. SoC
 framework registers a set of initial OPPs per device with the OPP layer. This
 list is expected to be an optimally small number typically around 5 per device.

trunk/Documentation/rbtree.txt

@@ -21,8 +21,8 @@ three rotations, respectively, to balance the tree), with slightly slower
 To quote Linux Weekly News:
 
     There are a number of red-black trees in use in the kernel.
-    The deadline and CFQ I/O schedulers employ rbtrees to
-    track requests; the packet CD/DVD driver does the same.
+    The anticipatory, deadline, and CFQ I/O schedulers all employ
+    rbtrees to track requests; the packet CD/DVD driver does the same.
     The high-resolution timer code uses an rbtree to organize outstanding
     timer requests.  The ext3 filesystem tracks directory entries in a
     red-black tree.  Virtual memory areas (VMAs) are tracked with red-black

trunk/Documentation/sysctl/kernel.txt

@@ -28,7 +28,6 @@ show up in /proc/sys/kernel:
 - core_uses_pid
 - ctrl-alt-del
 - dentry-state
-- dmesg_restrict
 - domainname
 - hostname
 - hotplug
@@ -214,19 +213,6 @@ to decide what to do with it.
 
 ==============================================================
 
-dmesg_restrict:
-
-This toggle indicates whether unprivileged users are prevented from using
-dmesg(8) to view messages from the kernel's log buffer.  When
-dmesg_restrict is set to (0) there are no restrictions.  When
-dmesg_restrict is set set to (1), users must have CAP_SYS_ADMIN to use
-dmesg(8).
-
-The kernel config option CONFIG_SECURITY_DMESG_RESTRICT sets the default
-value of dmesg_restrict.
-
-==============================================================
-
 domainname & hostname:
 
 These files can be used to set the NIS/YP domainname and the