---

yaml
---
r: 65236
b: refs/heads/master
c: e2cd68f
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: f998351c755a0e87785f2616c4f91f1b3b19b149
+refs/heads/master: e2cd68f7cd07cc898581bd736ebdd6f2c2323c2e

trunk/Documentation/devices.txt

@@ -94,6 +94,8 @@ Your cooperation is appreciated.
 		  9 = /dev/urandom	Faster, less secure random number gen.
 		 10 = /dev/aio		Asynchronous I/O notification interface
 		 11 = /dev/kmsg		Writes to this come out as printk's
+		 12 = /dev/oldmem	Used by crashdump kernels to access
+					the memory of the kernel that crashed.
 
   1 block	RAM disk
 		  0 = /dev/ram0		First RAM disk

trunk/Documentation/lguest/lguest.c

@@ -882,7 +882,7 @@ static u32 handle_block_output(int fd, const struct iovec *iov,
 		 * of the block file (possibly extending it). */
 		if (off + len > device_len) {
 			/* Trim it back to the correct length */
-			ftruncate(dev->fd, device_len);
+			ftruncate64(dev->fd, device_len);
 			/* Die, bad Guest, die. */
 			errx(1, "Write past end %llu+%u", off, len);
 		}

trunk/arch/arm/kernel/bios32.c

@@ -338,7 +338,7 @@ pbus_assign_bus_resources(struct pci_bus *bus, struct pci_sys_data *root)
  * pcibios_fixup_bus - Called after each bus is probed,
  * but before its children are examined.
  */
-void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+void pcibios_fixup_bus(struct pci_bus *bus)
 {
 	struct pci_sys_data *root = bus->sysdata;
 	struct pci_dev *dev;
@@ -419,7 +419,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
 /*
  * Convert from Linux-centric to bus-centric addresses for bridge devices.
  */
-void __devinit
+void
 pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
 			 struct resource *res)
 {

trunk/arch/i386/boot/memory.c

@@ -20,27 +20,41 @@
 
 static int detect_memory_e820(void)
 {
+	int count = 0;
 	u32 next = 0;
 	u32 size, id;
 	u8 err;
 	struct e820entry *desc = boot_params.e820_map;
 
 	do {
 		size = sizeof(struct e820entry);
-		id = SMAP;
+
+		/* Important: %edx is clobbered by some BIOSes,
+		   so it must be either used for the error output
+		   or explicitly marked clobbered. */
 		asm("int $0x15; setc %0"
-		    : "=am" (err), "+b" (next), "+d" (id), "+c" (size),
+		    : "=d" (err), "+b" (next), "=a" (id), "+c" (size),
 		      "=m" (*desc)
-		    : "D" (desc), "a" (0xe820));
+		    : "D" (desc), "d" (SMAP), "a" (0xe820));
+
+		/* Some BIOSes stop returning SMAP in the middle of
+		   the search loop.  We don't know exactly how the BIOS
+		   screwed up the map at that point, we might have a
+		   partial map, the full map, or complete garbage, so
+		   just return failure. */
+		if (id != SMAP) {
+			count = 0;
+			break;
+		}
 
-		if (err || id != SMAP)
+		if (err)
 			break;
 
-		boot_params.e820_entries++;
+		count++;
 		desc++;
-	} while (next && boot_params.e820_entries < E820MAX);
+	} while (next && count < E820MAX);
 
-	return boot_params.e820_entries;
+	return boot_params.e820_entries = count;
 }
 
 static int detect_memory_e801(void)
@@ -89,11 +103,16 @@ static int detect_memory_88(void)
 
 int detect_memory(void)
 {
+	int err = -1;
+
 	if (detect_memory_e820() > 0)
-		return 0;
+		err = 0;
 
 	if (!detect_memory_e801())
-		return 0;
+		err = 0;
+
+	if (!detect_memory_88())
+		err = 0;
 
-	return detect_memory_88();
+	return err;
 }

trunk/arch/i386/xen/mmu.c

@@ -559,6 +559,9 @@ void xen_exit_mmap(struct mm_struct *mm)
 	put_cpu();
 
 	spin_lock(&mm->page_table_lock);
-	xen_pgd_unpin(mm->pgd);
+
+	/* pgd may not be pinned in the error exit path of execve */
+	if (PagePinned(virt_to_page(mm->pgd)))
+		xen_pgd_unpin(mm->pgd);
 	spin_unlock(&mm->page_table_lock);
 }

trunk/arch/mips/kernel/scall64-o32.S

@@ -525,5 +525,5 @@ sys_call_table:
 	PTR	compat_sys_signalfd
 	PTR	compat_sys_timerfd
 	PTR	sys_eventfd
-	PTR	sys_fallocate			/* 4320 */
+	PTR	sys32_fallocate			/* 4320 */
 	.size	sys_call_table,.-sys_call_table

trunk/arch/mips/sgi-ip32/ip32-platform.c

@@ -41,8 +41,8 @@ static struct platform_device uart8250_device = {
 
 static int __init uart8250_init(void)
 {
-	uart8250_data[0].iobase = (unsigned long) &mace->isa.serial1;
-	uart8250_data[1].iobase = (unsigned long) &mace->isa.serial1;
+	uart8250_data[0].membase = (void __iomem *) &mace->isa.serial1;
+	uart8250_data[1].membase = (void __iomem *) &mace->isa.serial1;
 
 	return platform_device_register(&uart8250_device);
 }

trunk/arch/powerpc/boot/dts/mpc8349emitx.dts

@@ -99,6 +99,7 @@
 			#size-cells = <0>;
 			interrupt-parent = < &ipic >;
 			interrupts = <26 8>;
+			dr_mode = "peripheral";
 			phy_type = "ulpi";
 		};
 

trunk/arch/powerpc/kernel/process.c

@@ -605,6 +605,13 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp)
 	regs->ccr = 0;
 	regs->gpr[1] = sp;
 
+	/*
+	 * We have just cleared all the nonvolatile GPRs, so make
+	 * FULL_REGS(regs) return true.  This is necessary to allow
+	 * ptrace to examine the thread immediately after exec.
+	 */
+	regs->trap &= ~1UL;
+
 #ifdef CONFIG_PPC32
 	regs->mq = 0;
 	regs->nip = start;

trunk/arch/powerpc/platforms/83xx/usb.c

@@ -76,14 +76,14 @@ int mpc834x_usb_cfg(void)
 			if (port0_is_dr)
 				printk(KERN_WARNING
 					"834x USB port0 can't be used by both DR and MPH!\n");
-			sicrl |= MPC834X_SICRL_USB0;
+			sicrl &= ~MPC834X_SICRL_USB0;
 		}
 		prop = of_get_property(np, "port1", NULL);
 		if (prop) {
 			if (port1_is_dr)
 				printk(KERN_WARNING
 					"834x USB port1 can't be used by both DR and MPH!\n");
-			sicrl |= MPC834X_SICRL_USB1;
+			sicrl &= ~MPC834X_SICRL_USB1;
 		}
 		of_node_put(np);
 	}

trunk/arch/powerpc/platforms/cell/spufs/file.c

@@ -2177,8 +2177,8 @@ struct tree_descr spufs_dir_contents[] = {
 	{ "mbox_stat", &spufs_mbox_stat_fops, 0444, },
 	{ "ibox_stat", &spufs_ibox_stat_fops, 0444, },
 	{ "wbox_stat", &spufs_wbox_stat_fops, 0444, },
-	{ "signal1", &spufs_signal1_nosched_fops, 0222, },
-	{ "signal2", &spufs_signal2_nosched_fops, 0222, },
+	{ "signal1", &spufs_signal1_fops, 0666, },
+	{ "signal2", &spufs_signal2_fops, 0666, },
 	{ "signal1_type", &spufs_signal1_type, 0666, },
 	{ "signal2_type", &spufs_signal2_type, 0666, },
 	{ "cntl", &spufs_cntl_fops,  0666, },

trunk/arch/powerpc/sysdev/commproc.c

@@ -395,4 +395,4 @@ uint cpm_dpram_phys(u8* addr)
 {
 	return (dpram_pbase + (uint)(addr - dpram_vbase));
 }
-EXPORT_SYMBOL(cpm_dpram_addr);
+EXPORT_SYMBOL(cpm_dpram_phys);

trunk/arch/ppc/8xx_io/commproc.c

@@ -459,7 +459,7 @@ EXPORT_SYMBOL(cpm_dpdump);
 
 void *cpm_dpram_addr(unsigned long offset)
 {
-	return ((immap_t *)IMAP_ADDR)->im_cpm.cp_dpmem + offset;
+	return (void *)(dpram_vbase + offset);
 }
 EXPORT_SYMBOL(cpm_dpram_addr);
 

trunk/drivers/acpi/sleep/Makefile

@@ -1,5 +1,5 @@
 obj-y					:= wakeup.o
-obj-$(CONFIG_ACPI_SLEEP)		+= main.o
+obj-y					+= main.o
 obj-$(CONFIG_ACPI_SLEEP)		+= proc.o
 
 EXTRA_CFLAGS += $(ACPI_CFLAGS)

trunk/drivers/acpi/sleep/main.c

@@ -24,7 +24,30 @@
 
 u8 sleep_states[ACPI_S_STATE_COUNT];
 
+#ifdef CONFIG_PM_SLEEP
 static u32 acpi_target_sleep_state = ACPI_STATE_S0;
+#endif
+
+int acpi_sleep_prepare(u32 acpi_state)
+{
+#ifdef CONFIG_ACPI_SLEEP
+	/* do we have a wakeup address for S2 and S3? */
+	if (acpi_state == ACPI_STATE_S3) {
+		if (!acpi_wakeup_address) {
+			return -EFAULT;
+		}
+		acpi_set_firmware_waking_vector((acpi_physical_address)
+						virt_to_phys((void *)
+							     acpi_wakeup_address));
+
+	}
+	ACPI_FLUSH_CPU_CACHE();
+	acpi_enable_wakeup_device_prep(acpi_state);
+#endif
+	acpi_gpe_sleep_prepare(acpi_state);
+	acpi_enter_sleep_state_prep(acpi_state);
+	return 0;
+}
 
 #ifdef CONFIG_SUSPEND
 static struct pm_ops acpi_pm_ops;
@@ -60,27 +83,6 @@ static int acpi_pm_set_target(suspend_state_t pm_state)
 	return error;
 }
 
-int acpi_sleep_prepare(u32 acpi_state)
-{
-#ifdef CONFIG_ACPI_SLEEP
-	/* do we have a wakeup address for S2 and S3? */
-	if (acpi_state == ACPI_STATE_S3) {
-		if (!acpi_wakeup_address) {
-			return -EFAULT;
-		}
-		acpi_set_firmware_waking_vector((acpi_physical_address)
-						virt_to_phys((void *)
-							     acpi_wakeup_address));
-
-	}
-	ACPI_FLUSH_CPU_CACHE();
-	acpi_enable_wakeup_device_prep(acpi_state);
-#endif
-	acpi_gpe_sleep_prepare(acpi_state);
-	acpi_enter_sleep_state_prep(acpi_state);
-	return 0;
-}
-
 /**
  *	acpi_pm_prepare - Do preliminary suspend work.
  *	@pm_state: ignored
@@ -299,6 +301,7 @@ int acpi_suspend(u32 acpi_state)
 	return -EINVAL;
 }
 
+#ifdef CONFIG_PM_SLEEP
 /**
  *	acpi_pm_device_sleep_state - return preferred power state of ACPI device
  *		in the system sleep state given by %acpi_target_sleep_state
@@ -373,6 +376,7 @@ int acpi_pm_device_sleep_state(struct device *dev, int wake, int *d_min_p)
 		*d_min_p = d_min;
 	return d_max;
 }
+#endif
 
 static void acpi_power_off_prepare(void)
 {

trunk/drivers/ata/pata_sis.c

@@ -375,8 +375,9 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 	int drive_pci = sis_old_port_base(adev);
 	u16 timing;
 
+	/* MWDMA 0-2 and UDMA 0-5 */
 	const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
-	const u16 udma_bits[]  = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000};
+	const u16 udma_bits[]  = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000, 0x8000 };
 
 	pci_read_config_word(pdev, drive_pci, &timing);
 

trunk/drivers/ata/sata_sil24.c

@@ -888,16 +888,23 @@ static inline void sil24_host_intr(struct ata_port *ap)
 	u32 slot_stat, qc_active;
 	int rc;
 
+	/* If PCIX_IRQ_WOC, there's an inherent race window between
+	 * clearing IRQ pending status and reading PORT_SLOT_STAT
+	 * which may cause spurious interrupts afterwards.  This is
+	 * unavoidable and much better than losing interrupts which
+	 * happens if IRQ pending is cleared after reading
+	 * PORT_SLOT_STAT.
+	 */
+	if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
+		writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT);
+
 	slot_stat = readl(port + PORT_SLOT_STAT);
 
 	if (unlikely(slot_stat & HOST_SSTAT_ATTN)) {
 		sil24_error_intr(ap);
 		return;
 	}
 
-	if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
-		writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT);
-
 	qc_active = slot_stat & ~HOST_SSTAT_ATTN;
 	rc = ata_qc_complete_multiple(ap, qc_active, sil24_finish_qc);
 	if (rc > 0)
@@ -910,7 +917,8 @@ static inline void sil24_host_intr(struct ata_port *ap)
 		return;
 	}
 
-	if (ata_ratelimit())
+	/* spurious interrupts are expected if PCIX_IRQ_WOC */
+	if (!(ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) && ata_ratelimit())
 		ata_port_printk(ap, KERN_INFO, "spurious interrupt "
 			"(slot_stat 0x%x active_tag %d sactive 0x%x)\n",
 			slot_stat, ap->active_tag, ap->sactive);

trunk/drivers/base/core.c

@@ -284,6 +284,7 @@ static ssize_t show_uevent(struct device *dev, struct device_attribute *attr,
 
 	/* let the kset specific function add its keys */
 	pos = data;
+	memset(envp, 0, sizeof(envp));
 	retval = kset->uevent_ops->uevent(kset, &dev->kobj,
 					  envp, ARRAY_SIZE(envp),
 					  pos, PAGE_SIZE);

trunk/drivers/cdrom/cdrom.c

@@ -1032,6 +1032,10 @@ int cdrom_open(struct cdrom_device_info *cdi, struct inode *ip, struct file *fp)
 	check_disk_change(ip->i_bdev);
 	return 0;
 err_release:
+	if (CDROM_CAN(CDC_LOCK) && cdi->options & CDO_LOCK) {
+		cdi->ops->lock_door(cdi, 0);
+		cdinfo(CD_OPEN, "door unlocked.\n");
+	}
 	cdi->ops->release(cdi);
 err:
 	cdi->use_count--;

trunk/drivers/char/drm/i915_drv.h

@@ -210,6 +210,12 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 #define I915REG_INT_MASK_R 	0x020a8
 #define I915REG_INT_ENABLE_R	0x020a0
 
+#define I915REG_PIPEASTAT	0x70024
+#define I915REG_PIPEBSTAT	0x71024
+
+#define I915_VBLANK_INTERRUPT_ENABLE	(1UL<<17)
+#define I915_VBLANK_CLEAR		(1UL<<1)
+
 #define SRX_INDEX		0x3c4
 #define SRX_DATA		0x3c5
 #define SR01			1

trunk/drivers/char/drm/i915_irq.c

@@ -214,6 +214,10 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 	struct drm_device *dev = (struct drm_device *) arg;
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 	u16 temp;
+	u32 pipea_stats, pipeb_stats;
+
+	pipea_stats = I915_READ(I915REG_PIPEASTAT);
+	pipeb_stats = I915_READ(I915REG_PIPEBSTAT);
 
 	temp = I915_READ16(I915REG_INT_IDENTITY_R);
 
@@ -225,6 +229,8 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 		return IRQ_NONE;
 
 	I915_WRITE16(I915REG_INT_IDENTITY_R, temp);
+	(void) I915_READ16(I915REG_INT_IDENTITY_R);
+	DRM_READMEMORYBARRIER();
 
 	dev_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
 
@@ -252,6 +258,12 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 
 		if (dev_priv->swaps_pending > 0)
 			drm_locked_tasklet(dev, i915_vblank_tasklet);
+		I915_WRITE(I915REG_PIPEASTAT,
+			pipea_stats|I915_VBLANK_INTERRUPT_ENABLE|
+			I915_VBLANK_CLEAR);
+		I915_WRITE(I915REG_PIPEBSTAT,
+			pipeb_stats|I915_VBLANK_INTERRUPT_ENABLE|
+			I915_VBLANK_CLEAR);
 	}
 
 	return IRQ_HANDLED;