---

yaml
---
r: 182269
b: refs/heads/master
c: 642c4c7
h: refs/heads/master
i:
  182267: 18a3c09
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 71da81324c83ef65bb196c7f874ac1c6996d8287
+refs/heads/master: 642c4c75a765d7a3244ab39c8e6fb09be21eca5b

trunk/Documentation/ABI/testing/sysfs-devices-power

@@ -0,0 +1,79 @@
+What:		/sys/devices/.../power/
+Date:		January 2009
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../power directory contains attributes
+		allowing the user space to check and modify some power
+		management related properties of given device.
+
+What:		/sys/devices/.../power/wakeup
+Date:		January 2009
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../power/wakeup attribute allows the user
+		space to check if the device is enabled to wake up the system
+		from sleep states, such as the memory sleep state (suspend to
+		RAM) and hibernation (suspend to disk), and to enable or disable
+		it to do that as desired.
+
+		Some devices support "wakeup" events, which are hardware signals
+		used to activate the system from a sleep state.  Such devices
+		have one of the following two values for the sysfs power/wakeup
+		file:
+
+		+ "enabled\n" to issue the events;
+		+ "disabled\n" not to do so;
+
+		In that cases the user space can change the setting represented
+		by the contents of this file by writing either "enabled", or
+		"disabled" to it.
+
+		For the devices that are not capable of generating system wakeup
+		events this file contains "\n".  In that cases the user space
+		cannot modify the contents of this file and the device cannot be
+		enabled to wake up the system.
+
+What:		/sys/devices/.../power/control
+Date:		January 2009
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../power/control attribute allows the user
+		space to control the run-time power management of the device.
+
+		All devices have one of the following two values for the
+		power/control file:
+
+		+ "auto\n" to allow the device to be power managed at run time;
+		+ "on\n" to prevent the device from being power managed;
+
+		The default for all devices is "auto", which means that they may
+		be subject to automatic power management, depending on their
+		drivers.  Changing this attribute to "on" prevents the driver
+		from power managing the device at run time.  Doing that while
+		the device is suspended causes it to be woken up.
+
+What:		/sys/devices/.../power/async
+Date:		January 2009
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/devices/.../async attribute allows the user space to
+		enable or diasble the device's suspend and resume callbacks to
+		be executed asynchronously (ie. in separate threads, in parallel
+		with the main suspend/resume thread) during system-wide power
+		transitions (eg. suspend to RAM, hibernation).
+
+		All devices have one of the following two values for the
+		power/async file:
+
+		+ "enabled\n" to permit the asynchronous suspend/resume;
+		+ "disabled\n" to forbid it;
+
+		The value of this attribute may be changed by writing either
+		"enabled", or "disabled" to it.
+
+		It generally is unsafe to permit the asynchronous suspend/resume
+		of a device unless it is certain that all of the PM dependencies
+		of the device are known to the PM core.  However, for some
+		devices this attribute is set to "enabled" by bus type code or
+		device drivers and in that cases it should be safe to leave the
+		default value.

trunk/Documentation/ABI/testing/sysfs-power

@@ -101,3 +101,16 @@ Description:
 
 		CAUTION: Using it will cause your machine's real-time (CMOS)
 		clock to be set to a random invalid time after a resume.
+
+What:		/sys/power/pm_async
+Date:		January 2009
+Contact:	Rafael J. Wysocki <rjw@sisk.pl>
+Description:
+		The /sys/power/pm_async file controls the switch allowing the
+		user space to enable or disable asynchronous suspend and resume
+		of devices.  If enabled, this feature will cause some device
+		drivers' suspend and resume callbacks to be executed in parallel
+		with each other and with the main suspend thread.  It is enabled
+		if this file contains "1", which is the default.  It may be
+		disabled by writing "0" to this file, in which case all devices
+		will be suspended and resumed synchronously.

trunk/Documentation/DocBook/v4l/io.xml

@@ -589,7 +589,8 @@ number of a video input as in &v4l2-input; field
 	    <entry></entry>
 	    <entry>A place holder for future extensions and custom
 (driver defined) buffer types
-<constant>V4L2_BUF_TYPE_PRIVATE</constant> and higher.</entry>
+<constant>V4L2_BUF_TYPE_PRIVATE</constant> and higher. Applications
+should set this to 0.</entry>
 	  </row>
 	</tbody>
       </tgroup>

trunk/Documentation/DocBook/v4l/vidioc-qbuf.xml

@@ -54,12 +54,10 @@ to enqueue an empty (capturing) or filled (output) buffer in the
 driver's incoming queue. The semantics depend on the selected I/O
 method.</para>
 
-    <para>To enqueue a <link linkend="mmap">memory mapped</link>
-buffer applications set the <structfield>type</structfield> field of a
-&v4l2-buffer; to the same buffer type as previously &v4l2-format;
-<structfield>type</structfield> and &v4l2-requestbuffers;
-<structfield>type</structfield>, the <structfield>memory</structfield>
-field to <constant>V4L2_MEMORY_MMAP</constant> and the
+    <para>To enqueue a buffer applications set the <structfield>type</structfield>
+field of a &v4l2-buffer; to the same buffer type as was previously used
+with &v4l2-format; <structfield>type</structfield> and &v4l2-requestbuffers;
+<structfield>type</structfield>. Applications must also set the
 <structfield>index</structfield> field. Valid index numbers range from
 zero to the number of buffers allocated with &VIDIOC-REQBUFS;
 (&v4l2-requestbuffers; <structfield>count</structfield>) minus one. The
@@ -70,8 +68,19 @@ intended for output (<structfield>type</structfield> is
 <constant>V4L2_BUF_TYPE_VBI_OUTPUT</constant>) applications must also
 initialize the <structfield>bytesused</structfield>,
 <structfield>field</structfield> and
-<structfield>timestamp</structfield> fields. See <xref
-	linkend="buffer" /> for details. When
+<structfield>timestamp</structfield> fields, see <xref
+linkend="buffer" /> for details.
+Applications must also set <structfield>flags</structfield> to 0. If a driver
+supports capturing from specific video inputs and you want to specify a video
+input, then <structfield>flags</structfield> should be set to
+<constant>V4L2_BUF_FLAG_INPUT</constant> and the field
+<structfield>input</structfield> must be initialized to the desired input.
+The <structfield>reserved</structfield> field must be set to 0.
+</para>
+
+    <para>To enqueue a <link linkend="mmap">memory mapped</link>
+buffer applications set the <structfield>memory</structfield>
+field to <constant>V4L2_MEMORY_MMAP</constant>. When
 <constant>VIDIOC_QBUF</constant> is called with a pointer to this
 structure the driver sets the
 <constant>V4L2_BUF_FLAG_MAPPED</constant> and
@@ -81,28 +90,25 @@ structure the driver sets the
 &EINVAL;.</para>
 
     <para>To enqueue a <link linkend="userp">user pointer</link>
-buffer applications set the <structfield>type</structfield> field of a
-&v4l2-buffer; to the same buffer type as previously &v4l2-format;
-<structfield>type</structfield> and &v4l2-requestbuffers;
-<structfield>type</structfield>, the <structfield>memory</structfield>
-field to <constant>V4L2_MEMORY_USERPTR</constant> and the
+buffer applications set the <structfield>memory</structfield>
+field to <constant>V4L2_MEMORY_USERPTR</constant>, the
 <structfield>m.userptr</structfield> field to the address of the
-buffer and <structfield>length</structfield> to its size. When the
-buffer is intended for output additional fields must be set as above.
+buffer and <structfield>length</structfield> to its size.
 When <constant>VIDIOC_QBUF</constant> is called with a pointer to this
 structure the driver sets the <constant>V4L2_BUF_FLAG_QUEUED</constant>
 flag and clears the <constant>V4L2_BUF_FLAG_MAPPED</constant> and
 <constant>V4L2_BUF_FLAG_DONE</constant> flags in the
 <structfield>flags</structfield> field, or it returns an error code.
 This ioctl locks the memory pages of the buffer in physical memory,
 they cannot be swapped out to disk. Buffers remain locked until
-dequeued, until the &VIDIOC-STREAMOFF; or &VIDIOC-REQBUFS; ioctl are
+dequeued, until the &VIDIOC-STREAMOFF; or &VIDIOC-REQBUFS; ioctl is
 called, or until the device is closed.</para>
 
     <para>Applications call the <constant>VIDIOC_DQBUF</constant>
 ioctl to dequeue a filled (capturing) or displayed (output) buffer
 from the driver's outgoing queue. They just set the
-<structfield>type</structfield> and <structfield>memory</structfield>
+<structfield>type</structfield>, <structfield>memory</structfield>
+and <structfield>reserved</structfield>
 fields of a &v4l2-buffer; as above, when <constant>VIDIOC_DQBUF</constant>
 is called with a pointer to this structure the driver fills the
 remaining fields or returns an error code.</para>

trunk/Documentation/DocBook/v4l/vidioc-querybuf.xml

@@ -54,12 +54,13 @@ buffer at any time after buffers have been allocated with the
 &VIDIOC-REQBUFS; ioctl.</para>
 
     <para>Applications set the <structfield>type</structfield> field
-    of a &v4l2-buffer; to the same buffer type as previously
+    of a &v4l2-buffer; to the same buffer type as was previously used with
 &v4l2-format; <structfield>type</structfield> and &v4l2-requestbuffers;
 <structfield>type</structfield>, and the <structfield>index</structfield>
     field. Valid index numbers range from zero
 to the number of buffers allocated with &VIDIOC-REQBUFS;
     (&v4l2-requestbuffers; <structfield>count</structfield>) minus one.
+The <structfield>reserved</structfield> field should to set to 0.
 After calling <constant>VIDIOC_QUERYBUF</constant> with a pointer to
     this structure drivers return an error code or fill the rest of
 the structure.</para>
@@ -68,8 +69,8 @@ the structure.</para>
 <constant>V4L2_BUF_FLAG_MAPPED</constant>,
 <constant>V4L2_BUF_FLAG_QUEUED</constant> and
 <constant>V4L2_BUF_FLAG_DONE</constant> flags will be valid. The
-<structfield>memory</structfield> field will be set to
-<constant>V4L2_MEMORY_MMAP</constant>, the <structfield>m.offset</structfield>
+<structfield>memory</structfield> field will be set to the current
+I/O method, the <structfield>m.offset</structfield>
 contains the offset of the buffer from the start of the device memory,
 the <structfield>length</structfield> field its size. The driver may
 or may not set the remaining fields and flags, they are meaningless in

trunk/Documentation/DocBook/v4l/vidioc-reqbufs.xml

@@ -54,23 +54,23 @@ I/O. Memory mapped buffers are located in device memory and must be
 allocated with this ioctl before they can be mapped into the
 application's address space. User buffers are allocated by
 applications themselves, and this ioctl is merely used to switch the
-driver into user pointer I/O mode.</para>
+driver into user pointer I/O mode and to setup some internal structures.</para>
 
-    <para>To allocate device buffers applications initialize three
-fields of a <structname>v4l2_requestbuffers</structname> structure.
+    <para>To allocate device buffers applications initialize all
+fields of the <structname>v4l2_requestbuffers</structname> structure.
 They set the <structfield>type</structfield> field to the respective
 stream or buffer type, the <structfield>count</structfield> field to
-the desired number of buffers, and <structfield>memory</structfield>
-must be set to <constant>V4L2_MEMORY_MMAP</constant>. When the ioctl
-is called with a pointer to this structure the driver attempts to
-allocate the requested number of buffers and stores the actual number
+the desired number of buffers, <structfield>memory</structfield>
+must be set to the requested I/O method and the reserved array
+must be zeroed. When the ioctl
+is called with a pointer to this structure the driver will attempt to allocate
+the requested number of buffers and it stores the actual number
 allocated in the <structfield>count</structfield> field. It can be
 smaller than the number requested, even zero, when the driver runs out
-of free memory. A larger number is possible when the driver requires
-more buffers to function correctly.<footnote>
-	<para>For example video output requires at least two buffers,
+of free memory. A larger number is also possible when the driver requires
+more buffers to function correctly. For example video output requires at least two buffers,
 one displayed and one filled by the application.</para>
-	</footnote> When memory mapping I/O is not supported the ioctl
+    <para>When the I/O method is not supported the ioctl
 returns an &EINVAL;.</para>
 
     <para>Applications can call <constant>VIDIOC_REQBUFS</constant>
@@ -81,14 +81,6 @@ in progress, an implicit &VIDIOC-STREAMOFF;. <!-- mhs: I see no
 reason why munmap()ping one or even all buffers must imply
 streamoff.--></para>
 
-    <para>To negotiate user pointer I/O, applications initialize only
-the <structfield>type</structfield> field and set
-<structfield>memory</structfield> to
-<constant>V4L2_MEMORY_USERPTR</constant>. When the ioctl is called
-with a pointer to this structure the driver prepares for user pointer
-I/O, when this I/O method is not supported the ioctl returns an
-&EINVAL;.</para>
-
     <table pgwide="1" frame="none" id="v4l2-requestbuffers">
       <title>struct <structname>v4l2_requestbuffers</structname></title>
       <tgroup cols="3">
@@ -97,9 +89,7 @@ I/O, when this I/O method is not supported the ioctl returns an
 	  <row>
 	    <entry>__u32</entry>
 	    <entry><structfield>count</structfield></entry>
-	    <entry>The number of buffers requested or granted. This
-field is only used when <structfield>memory</structfield> is set to
-<constant>V4L2_MEMORY_MMAP</constant>.</entry>
+	    <entry>The number of buffers requested or granted.</entry>
 	  </row>
 	  <row>
 	    <entry>&v4l2-buf-type;</entry>
@@ -120,7 +110,7 @@ as the &v4l2-format; <structfield>type</structfield> field. See <xref
 	    <entry><structfield>reserved</structfield>[2]</entry>
 	    <entry>A place holder for future extensions and custom
 (driver defined) buffer types <constant>V4L2_BUF_TYPE_PRIVATE</constant> and
-higher.</entry>
+higher. This array should be zeroed by applications.</entry>
 	  </row>
 	</tbody>
       </tgroup>

trunk/Documentation/cachetlb.txt

@@ -377,3 +377,27 @@ maps this page at its virtual address.
 	All the functionality of flush_icache_page can be implemented in
 	flush_dcache_page and update_mmu_cache. In 2.7 the hope is to
 	remove this interface completely.
+
+The final category of APIs is for I/O to deliberately aliased address
+ranges inside the kernel.  Such aliases are set up by use of the
+vmap/vmalloc API.  Since kernel I/O goes via physical pages, the I/O
+subsystem assumes that the user mapping and kernel offset mapping are
+the only aliases.  This isn't true for vmap aliases, so anything in
+the kernel trying to do I/O to vmap areas must manually manage
+coherency.  It must do this by flushing the vmap range before doing
+I/O and invalidating it after the I/O returns.
+
+  void flush_kernel_vmap_range(void *vaddr, int size)
+       flushes the kernel cache for a given virtual address range in
+       the vmap area.  This is to make sure that any data the kernel
+       modified in the vmap range is made visible to the physical
+       page.  The design is to make this area safe to perform I/O on.
+       Note that this API does *not* also flush the offset map alias
+       of the area.
+
+  void invalidate_kernel_vmap_range(void *vaddr, int size) invalidates
+       the cache for a given virtual address range in the vmap area
+       which prevents the processor from making the cache stale by
+       speculatively reading data while the I/O was occurring to the
+       physical pages.  This is only necessary for data reads into the
+       vmap area.

trunk/Documentation/dontdiff

@@ -69,7 +69,6 @@ av_permissions.h
 bbootsect
 bin2c
 binkernel.spec
-binoffset
 bootsect
 bounds.h
 bsetup

trunk/Documentation/dvb/get_dvb_firmware

@@ -26,7 +26,7 @@ use IO::Handle;
 		"dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
 		"or51211", "or51132_qam", "or51132_vsb", "bluebird",
 		"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718",
-		"af9015");
+		"af9015", "ngene");
 
 # Check args
 syntax() if (scalar(@ARGV) != 1);
@@ -39,7 +39,7 @@ for ($i=0; $i < scalar(@components); $i++) {
 	die $@ if $@;
 	print STDERR <<EOF;
 Firmware(s) $outfile extracted successfully.
-Now copy it(they) to either /usr/lib/hotplug/firmware or /lib/firmware
+Now copy it(them) to either /usr/lib/hotplug/firmware or /lib/firmware
 (depending on configuration of firmware hotplug).
 EOF
 	exit(0);
@@ -549,6 +549,24 @@ sub af9015 {
 	close INFILE;
 }
 
+sub ngene {
+    my $url = "http://www.digitaldevices.de/download/";
+    my $file1 = "ngene_15.fw";
+    my $hash1 = "d798d5a757121174f0dbc5f2833c0c85";
+    my $file2 = "ngene_17.fw";
+    my $hash2 = "26b687136e127b8ac24b81e0eeafc20b";
+
+    checkstandard();
+
+    wgetfile($file1, $url . $file1);
+    verify($file1, $hash1);
+
+    wgetfile($file2, $url . $file2);
+    verify($file2, $hash2);
+
+    "$file1, $file2";
+}
+
 # ---------------------------------------------------------------
 # Utilities
 
@@ -667,6 +685,7 @@ sub delzero{
 sub syntax() {
     print STDERR "syntax: get_dvb_firmware <component>\n";
     print STDERR "Supported components:\n";
+    @components = sort @components;
     for($i=0; $i < scalar(@components); $i++) {
 	print STDERR "\t" . $components[$i] . "\n";
     }

trunk/Documentation/feature-removal-schedule.txt

@@ -64,6 +64,17 @@ Who:	Robin Getz <rgetz@blackfin.uclinux.org> & Matt Mackall <mpm@selenic.com>
 
 ---------------------------
 
+What:	Deprecated snapshot ioctls
+When:	2.6.36
+
+Why:	The ioctls in kernel/power/user.c were marked as deprecated long time
+	ago. Now they notify users about that so that they need to replace
+	their userspace. After some more time, remove them completely.
+
+Who:	Jiri Slaby <jirislaby@gmail.com>
+
+---------------------------
+
 What:	The ieee80211_regdom module parameter
 When:	March 2010 / desktop catchup