PCI: Move pci_configure_slot() to drivers/pci/probe.c

Move pci_configure_slot() and related functions from
drivers/pci/hotplug/pcihp_slot to drivers/pci/probe.c.

This is to prepare for doing device configuration during the normal
enumeration process instead of just after hot-add.

No functional change.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

drivers/pci/hotplug/Makefile

@@ -24,7 +24,7 @@ obj-$(CONFIG_HOTPLUG_PCI_S390)		+= s390_pci_hpc.o
 
 obj-$(CONFIG_HOTPLUG_PCI_ACPI_IBM)	+= acpiphp_ibm.o
 
-pci_hotplug-objs	:=	pci_hotplug_core.o pcihp_slot.o
+pci_hotplug-objs	:=	pci_hotplug_core.o
 
 ifdef CONFIG_HOTPLUG_PCI_CPCI
 pci_hotplug-objs	+=	cpci_hotplug_core.o	\

drivers/pci/probe.c

@@ -6,6 +6,7 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/pci.h>
+#include <linux/pci_hotplug.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/cpumask.h>
@@ -1236,6 +1237,155 @@ int pci_setup_device(struct pci_dev *dev)
 	return 0;
 }
 
+static struct hpp_type0 pci_default_type0 = {
+	.revision = 1,
+	.cache_line_size = 8,
+	.latency_timer = 0x40,
+	.enable_serr = 0,
+	.enable_perr = 0,
+};
+
+static void program_hpp_type0(struct pci_dev *dev, struct hpp_type0 *hpp)
+{
+	u16 pci_cmd, pci_bctl;
+
+	if (!hpp) {
+		/*
+		 * Perhaps we *should* use default settings for PCIe, but
+		 * pciehp didn't, so we won't either.
+		 */
+		if (pci_is_pcie(dev))
+			return;
+		hpp = &pci_default_type0;
+	}
+
+	if (hpp->revision > 1) {
+		dev_warn(&dev->dev,
+			 "PCI settings rev %d not supported; using defaults\n",
+			 hpp->revision);
+		hpp = &pci_default_type0;
+	}
+
+	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, hpp->cache_line_size);
+	pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp->latency_timer);
+	pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
+	if (hpp->enable_serr)
+		pci_cmd |= PCI_COMMAND_SERR;
+	else
+		pci_cmd &= ~PCI_COMMAND_SERR;
+	if (hpp->enable_perr)
+		pci_cmd |= PCI_COMMAND_PARITY;
+	else
+		pci_cmd &= ~PCI_COMMAND_PARITY;
+	pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
+
+	/* Program bridge control value */
+	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
+		pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
+				      hpp->latency_timer);
+		pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
+		if (hpp->enable_serr)
+			pci_bctl |= PCI_BRIDGE_CTL_SERR;
+		else
+			pci_bctl &= ~PCI_BRIDGE_CTL_SERR;
+		if (hpp->enable_perr)
+			pci_bctl |= PCI_BRIDGE_CTL_PARITY;
+		else
+			pci_bctl &= ~PCI_BRIDGE_CTL_PARITY;
+		pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl);
+	}
+}
+
+static void program_hpp_type1(struct pci_dev *dev, struct hpp_type1 *hpp)
+{
+	if (hpp)
+		dev_warn(&dev->dev, "PCI-X settings not supported\n");
+}
+
+static void program_hpp_type2(struct pci_dev *dev, struct hpp_type2 *hpp)
+{
+	int pos;
+	u32 reg32;
+
+	if (!hpp)
+		return;
+
+	if (hpp->revision > 1) {
+		dev_warn(&dev->dev, "PCIe settings rev %d not supported\n",
+			 hpp->revision);
+		return;
+	}
+
+	/* Initialize Device Control Register */
+	pcie_capability_clear_and_set_word(dev, PCI_EXP_DEVCTL,
+			~hpp->pci_exp_devctl_and, hpp->pci_exp_devctl_or);
+
+	/* Initialize Link Control Register */
+	if (dev->subordinate)
+		pcie_capability_clear_and_set_word(dev, PCI_EXP_LNKCTL,
+			~hpp->pci_exp_lnkctl_and, hpp->pci_exp_lnkctl_or);
+
+	/* Find Advanced Error Reporting Enhanced Capability */
+	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
+	if (!pos)
+		return;
+
+	/* Initialize Uncorrectable Error Mask Register */
+	pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, &reg32);
+	reg32 = (reg32 & hpp->unc_err_mask_and) | hpp->unc_err_mask_or;
+	pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, reg32);
+
+	/* Initialize Uncorrectable Error Severity Register */
+	pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &reg32);
+	reg32 = (reg32 & hpp->unc_err_sever_and) | hpp->unc_err_sever_or;
+	pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, reg32);
+
+	/* Initialize Correctable Error Mask Register */
+	pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, &reg32);
+	reg32 = (reg32 & hpp->cor_err_mask_and) | hpp->cor_err_mask_or;
+	pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg32);
+
+	/* Initialize Advanced Error Capabilities and Control Register */
+	pci_read_config_dword(dev, pos + PCI_ERR_CAP, &reg32);
+	reg32 = (reg32 & hpp->adv_err_cap_and) | hpp->adv_err_cap_or;
+	pci_write_config_dword(dev, pos + PCI_ERR_CAP, reg32);
+
+	/*
+	 * FIXME: The following two registers are not supported yet.
+	 *
+	 *   o Secondary Uncorrectable Error Severity Register
+	 *   o Secondary Uncorrectable Error Mask Register
+	 */
+}
+
+void pci_configure_slot(struct pci_dev *dev)
+{
+	struct pci_dev *cdev;
+	struct hotplug_params hpp;
+	int ret;
+
+	if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL ||
+			(dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
+			(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
+		return;
+
+	pcie_bus_configure_settings(dev->bus);
+
+	memset(&hpp, 0, sizeof(hpp));
+	ret = pci_get_hp_params(dev, &hpp);
+
+	program_hpp_type2(dev, hpp.t2);
+	program_hpp_type1(dev, hpp.t1);
+	program_hpp_type0(dev, hpp.t0);
+
+	if (dev->subordinate) {
+		list_for_each_entry(cdev, &dev->subordinate->devices,
+				    bus_list)
+			pci_configure_slot(cdev);
+	}
+}
+EXPORT_SYMBOL_GPL(pci_configure_slot);
+
 static void pci_release_capabilities(struct pci_dev *dev)
 {
 	pci_vpd_release(dev);