---

yaml
---
r: 278477
b: refs/heads/master
c: 63d3296
h: refs/heads/master
i:
  278475: 135df7a
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 3ebfcdc43ae261e58e5b9b381ae1f278cda068e3
+refs/heads/master: 63d3296741e9f556d1edbdc34c07ce7dbe54a471

trunk/drivers/net/wireless/ath/ath9k/hw.c

@@ -1514,13 +1514,61 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 		   struct ath9k_hw_cal_data *caldata, bool bChannelChange)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
+	struct ath9k_hw_mci *mci_hw = &ah->btcoex_hw.mci;
 	u32 saveLedState;
 	struct ath9k_channel *curchan = ah->curchan;
 	u32 saveDefAntenna;
 	u32 macStaId1;
 	u64 tsf = 0;
 	int i, r;
 	bool allow_fbs = false;
+	bool mci = !!(ah->caps.hw_caps & ATH9K_HW_CAP_MCI);
+	bool save_fullsleep = ah->chip_fullsleep;
+
+	if (mci) {
+
+		ar9003_mci_2g5g_changed(ah, IS_CHAN_2GHZ(chan));
+
+		if (mci_hw->bt_state == MCI_BT_CAL_START) {
+			u32 payload[4] = {0, 0, 0, 0};
+
+			ath_dbg(common, ATH_DBG_MCI, "MCI stop rx for BT CAL");
+
+			mci_hw->bt_state = MCI_BT_CAL;
+
+			/*
+			 * MCI FIX: disable mci interrupt here. This is to avoid
+			 * SW_MSG_DONE or RX_MSG bits to trigger MCI_INT and
+			 * lead to mci_intr reentry.
+			 */
+
+			ar9003_mci_disable_interrupt(ah);
+
+			ath_dbg(common, ATH_DBG_MCI, "send WLAN_CAL_GRANT");
+			MCI_GPM_SET_CAL_TYPE(payload, MCI_GPM_WLAN_CAL_GRANT);
+			ar9003_mci_send_message(ah, MCI_GPM, 0, payload,
+						16, true, false);
+
+			ath_dbg(common, ATH_DBG_MCI, "\nMCI BT is calibrating");
+
+			/* Wait BT calibration to be completed for 25ms */
+
+			if (ar9003_mci_wait_for_gpm(ah, MCI_GPM_BT_CAL_DONE,
+								  0, 25000))
+				ath_dbg(common, ATH_DBG_MCI,
+					"MCI got BT_CAL_DONE\n");
+			else
+				ath_dbg(common, ATH_DBG_MCI,
+					"MCI ### BT cal takes to long, force"
+					"bt_state to be bt_awake\n");
+			mci_hw->bt_state = MCI_BT_AWAKE;
+			/* MCI FIX: enable mci interrupt here */
+			ar9003_mci_enable_interrupt(ah);
+
+			return true;
+		}
+	}
+
 
 	if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE))
 		return -EIO;
@@ -1558,12 +1606,29 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 		if (ath9k_hw_channel_change(ah, chan)) {
 			ath9k_hw_loadnf(ah, ah->curchan);
 			ath9k_hw_start_nfcal(ah, true);
+			if (mci && mci_hw->ready)
+				ar9003_mci_2g5g_switch(ah, true);
+
 			if (AR_SREV_9271(ah))
 				ar9002_hw_load_ani_reg(ah, chan);
 			return 0;
 		}
 	}
 
+	if (mci) {
+		ar9003_mci_disable_interrupt(ah);
+
+		if (mci_hw->ready && !save_fullsleep) {
+			ar9003_mci_mute_bt(ah);
+			udelay(20);
+			REG_WRITE(ah, AR_BTCOEX_CTRL, 0);
+		}
+
+		mci_hw->bt_state = MCI_BT_SLEEP;
+		mci_hw->ready = false;
+	}
+
+
 	saveDefAntenna = REG_READ(ah, AR_DEF_ANTENNA);
 	if (saveDefAntenna == 0)
 		saveDefAntenna = 1;
@@ -1619,6 +1684,9 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	if (r)
 		return r;
 
+	if (mci)
+		ar9003_mci_reset(ah, false, IS_CHAN_2GHZ(chan), save_fullsleep);
+
 	/*
 	 * Some AR91xx SoC devices frequently fail to accept TSF writes
 	 * right after the chip reset. When that happens, write a new
@@ -1736,6 +1804,55 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	ath9k_hw_loadnf(ah, chan);
 	ath9k_hw_start_nfcal(ah, true);
 
+	if (mci && mci_hw->ready) {
+
+		if (IS_CHAN_2GHZ(chan) &&
+		    (mci_hw->bt_state == MCI_BT_SLEEP)) {
+
+			if (ar9003_mci_check_int(ah,
+			    AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET) ||
+			    ar9003_mci_check_int(ah,
+			    AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE)) {
+
+				/*
+				 * BT is sleeping. Check if BT wakes up during
+				 * WLAN calibration. If BT wakes up during
+				 * WLAN calibration, need to go through all
+				 * message exchanges again and recal.
+				 */
+
+				ath_dbg(common, ATH_DBG_MCI, "MCI BT wakes up"
+					"during WLAN calibration\n");
+
+				REG_WRITE(ah, AR_MCI_INTERRUPT_RX_MSG_RAW,
+					  AR_MCI_INTERRUPT_RX_MSG_REMOTE_RESET |
+					  AR_MCI_INTERRUPT_RX_MSG_REQ_WAKE);
+				ath_dbg(common, ATH_DBG_MCI, "MCI send"
+					"REMOTE_RESET\n");
+				ar9003_mci_remote_reset(ah, true);
+				ar9003_mci_send_sys_waking(ah, true);
+				udelay(1);
+				if (IS_CHAN_2GHZ(chan))
+					ar9003_mci_send_lna_transfer(ah, true);
+
+				mci_hw->bt_state = MCI_BT_AWAKE;
+
+				ath_dbg(common, ATH_DBG_MCI, "MCI re-cal\n");
+
+				if (caldata) {
+					caldata->done_txiqcal_once = false;
+					caldata->done_txclcal_once = false;
+					caldata->rtt_hist.num_readings = 0;
+				}
+
+				if (!ath9k_hw_init_cal(ah, chan))
+					return -EIO;
+
+			}
+		}
+		ar9003_mci_enable_interrupt(ah);
+	}
+
 	ENABLE_REGWRITE_BUFFER(ah);
 
 	ath9k_hw_restore_chainmask(ah);
@@ -1778,6 +1895,21 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	if (ah->btcoex_hw.enabled)
 		ath9k_hw_btcoex_enable(ah);
 
+	if (mci && mci_hw->ready) {
+		/*
+		 * check BT state again to make
+		 * sure it's not changed.
+		 */
+
+		ar9003_mci_sync_bt_state(ah);
+		ar9003_mci_2g5g_switch(ah, true);
+
+		if ((mci_hw->bt_state == MCI_BT_AWAKE) &&
+				(mci_hw->query_bt == true)) {
+			mci_hw->need_flush_btinfo = true;
+		}
+	}
+
 	if (AR_SREV_9300_20_OR_LATER(ah)) {
 		ar9003_hw_bb_watchdog_config(ah);