---

yaml
---
r: 232134
b: refs/heads/master
c: 0f5c2ac
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: dfff95c394b0dd977a6b65bd52b99703fae94d9b
+refs/heads/master: 0f5c2ac58f22fd41deaeeb45ee752d4ae55f0d01

trunk/Documentation/sound/alsa/soc/codec.txt

@@ -27,42 +27,38 @@ ASoC Codec driver breakdown
 
 1 - Codec DAI and PCM configuration
 -----------------------------------
-Each codec driver must have a struct snd_soc_codec_dai to define its DAI and
+Each codec driver must have a struct snd_soc_dai_driver to define its DAI and
 PCM capabilities and operations. This struct is exported so that it can be
 registered with the core by your machine driver.
 
 e.g.
 
-struct snd_soc_codec_dai wm8731_dai = {
-	.name = "WM8731",
-	/* playback capabilities */
+static struct snd_soc_dai_ops wm8731_dai_ops = {
+	.prepare	= wm8731_pcm_prepare,
+	.hw_params	= wm8731_hw_params,
+	.shutdown	= wm8731_shutdown,
+	.digital_mute	= wm8731_mute,
+	.set_sysclk	= wm8731_set_dai_sysclk,
+	.set_fmt	= wm8731_set_dai_fmt,
+};
+
+struct snd_soc_dai_driver wm8731_dai = {
+	.name = "wm8731-hifi",
 	.playback = {
 		.stream_name = "Playback",
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = WM8731_RATES,
 		.formats = WM8731_FORMATS,},
-	/* capture capabilities */
 	.capture = {
 		.stream_name = "Capture",
 		.channels_min = 1,
 		.channels_max = 2,
 		.rates = WM8731_RATES,
 		.formats = WM8731_FORMATS,},
-	/* pcm operations - see section 4 below */
-	.ops = {
-		.prepare = wm8731_pcm_prepare,
-		.hw_params = wm8731_hw_params,
-		.shutdown = wm8731_shutdown,
-	},
-	/* DAI operations - see DAI.txt */
-	.dai_ops = {
-		.digital_mute = wm8731_mute,
-		.set_sysclk = wm8731_set_dai_sysclk,
-		.set_fmt = wm8731_set_dai_fmt,
-	}
+	.ops = &wm8731_dai_ops,
+	.symmetric_rates = 1,
 };
-EXPORT_SYMBOL_GPL(wm8731_dai);
 
 
 2 - Codec control IO
@@ -186,13 +182,14 @@ when the mute is applied or freed.
 
 i.e.
 
-static int wm8974_mute(struct snd_soc_codec *codec,
-	struct snd_soc_codec_dai *dai, int mute)
+static int wm8974_mute(struct snd_soc_dai *dai, int mute)
 {
-	u16 mute_reg = wm8974_read_reg_cache(codec, WM8974_DAC) & 0xffbf;
-	if(mute)
-		wm8974_write(codec, WM8974_DAC, mute_reg | 0x40);
+	struct snd_soc_codec *codec = dai->codec;
+	u16 mute_reg = snd_soc_read(codec, WM8974_DAC) & 0xffbf;
+
+	if (mute)
+		snd_soc_write(codec, WM8974_DAC, mute_reg | 0x40);
 	else
-		wm8974_write(codec, WM8974_DAC, mute_reg);
+		snd_soc_write(codec, WM8974_DAC, mute_reg);
 	return 0;
 }

trunk/Documentation/sound/alsa/soc/machine.txt

@@ -12,6 +12,8 @@ the following struct:-
 struct snd_soc_card {
 	char *name;
 
+	...
+
 	int (*probe)(struct platform_device *pdev);
 	int (*remove)(struct platform_device *pdev);
 
@@ -22,12 +24,13 @@ struct snd_soc_card {
 	int (*resume_pre)(struct platform_device *pdev);
 	int (*resume_post)(struct platform_device *pdev);
 
-	/* machine stream operations */
-	struct snd_soc_ops *ops;
+	...
 
 	/* CPU <--> Codec DAI links  */
 	struct snd_soc_dai_link *dai_link;
 	int num_links;
+
+	...
 };
 
 probe()/remove()
@@ -42,11 +45,6 @@ of any machine audio tasks that have to be done before or after the codec, DAIs
 and DMA is suspended and resumed. Optional.
 
 
-Machine operations
-------------------
-The machine specific audio operations can be set here. Again this is optional.
-
-
 Machine DAI Configuration
 -------------------------
 The machine DAI configuration glues all the codec and CPU DAIs together. It can
@@ -61,8 +59,10 @@ struct snd_soc_dai_link is used to set up each DAI in your machine. e.g.
 static struct snd_soc_dai_link corgi_dai = {
 	.name = "WM8731",
 	.stream_name = "WM8731",
-	.cpu_dai = &pxa_i2s_dai,
-	.codec_dai = &wm8731_dai,
+	.cpu_dai_name = "pxa-is2-dai",
+	.codec_dai_name = "wm8731-hifi",
+	.platform_name = "pxa-pcm-audio",
+	.codec_name = "wm8713-codec.0-001a",
 	.init = corgi_wm8731_init,
 	.ops = &corgi_ops,
 };
@@ -77,26 +77,6 @@ static struct snd_soc_card snd_soc_corgi = {
 };
 
 
-Machine Audio Subsystem
------------------------
-
-The machine soc device glues the platform, machine and codec driver together.
-Private data can also be set here. e.g.
-
-/* corgi audio private data */
-static struct wm8731_setup_data corgi_wm8731_setup = {
-	.i2c_address = 0x1b,
-};
-
-/* corgi audio subsystem */
-static struct snd_soc_device corgi_snd_devdata = {
-	.machine = &snd_soc_corgi,
-	.platform = &pxa2xx_soc_platform,
-	.codec_dev = &soc_codec_dev_wm8731,
-	.codec_data = &corgi_wm8731_setup,
-};
-
-
 Machine Power Map
 -----------------
 

trunk/Documentation/sound/alsa/soc/platform.txt

@@ -20,9 +20,10 @@ struct snd_soc_ops {
 	int (*trigger)(struct snd_pcm_substream *, int);
 };
 
-The platform driver exports its DMA functionality via struct snd_soc_platform:-
+The platform driver exports its DMA functionality via struct
+snd_soc_platform_driver:-
 
-struct snd_soc_platform {
+struct snd_soc_platform_driver {
 	char *name;
 
 	int (*probe)(struct platform_device *pdev);
@@ -34,6 +35,13 @@ struct snd_soc_platform {
 	int (*pcm_new)(struct snd_card *, struct snd_soc_codec_dai *, struct snd_pcm *);
 	void (*pcm_free)(struct snd_pcm *);
 
+	/*
+	 * For platform caused delay reporting.
+	 * Optional.
+	 */
+	snd_pcm_sframes_t (*delay)(struct snd_pcm_substream *,
+		struct snd_soc_dai *);
+
 	/* platform stream ops */
 	struct snd_pcm_ops *pcm_ops;
 };

trunk/MAINTAINERS

@@ -3150,7 +3150,7 @@ S:	Orphan
 F:	drivers/video/imsttfb.c
 
 INFINIBAND SUBSYSTEM
-M:	Roland Dreier <rolandd@cisco.com>
+M:	Roland Dreier <roland@kernel.org>
 M:	Sean Hefty <sean.hefty@intel.com>
 M:	Hal Rosenstock <hal.rosenstock@gmail.com>
 L:	linux-rdma@vger.kernel.org

trunk/arch/powerpc/boot/Makefile

@@ -368,7 +368,7 @@ INSTALL := install
 extra-installed		:= $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y))
 hostprogs-installed	:= $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs-y))
 wrapper-installed	:= $(DESTDIR)$(WRAPPER_BINDIR)/wrapper
-dts-installed		:= $(patsubst $(obj)/dts/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(obj)/dts/*.dts))
+dts-installed		:= $(patsubst $(dtstree)/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(dtstree)/*.dts))
 
 all-installed		:= $(extra-installed) $(hostprogs-installed) $(wrapper-installed) $(dts-installed)
 

trunk/arch/powerpc/boot/dts/mpc8308rdb.dts

@@ -109,7 +109,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		compatible = "fsl,mpc8315-immr", "simple-bus";
+		compatible = "fsl,mpc8308-immr", "simple-bus";
 		ranges = <0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;

trunk/arch/powerpc/boot/dts/p1022ds.dts

@@ -291,13 +291,13 @@
 			ranges = <0x0 0xc100 0x200>;
 			cell-index = <1>;
 			dma00: dma-channel@0 {
-				compatible = "fsl,eloplus-dma-channel";
+				compatible = "fsl,ssi-dma-channel";
 				reg = <0x0 0x80>;
 				cell-index = <0>;
 				interrupts = <76 2>;
 			};
 			dma01: dma-channel@80 {
-				compatible = "fsl,eloplus-dma-channel";
+				compatible = "fsl,ssi-dma-channel";
 				reg = <0x80 0x80>;
 				cell-index = <1>;
 				interrupts = <77 2>;

trunk/arch/powerpc/configs/pseries_defconfig

@@ -2,7 +2,7 @@ CONFIG_PPC64=y
 CONFIG_ALTIVEC=y
 CONFIG_VSX=y
 CONFIG_SMP=y
-CONFIG_NR_CPUS=128
+CONFIG_NR_CPUS=1024
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -45,6 +45,8 @@ CONFIG_KEXEC=y
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTREMOVE=y
+CONFIG_PPC_64K_PAGES=y
+CONFIG_PPC_SUBPAGE_PROT=y
 CONFIG_SCHED_SMT=y
 CONFIG_HOTPLUG_PCI=m
 CONFIG_HOTPLUG_PCI_RPA=m
@@ -184,6 +186,7 @@ CONFIG_ACENIC_OMIT_TIGON_I=y
 CONFIG_E1000=y
 CONFIG_E1000E=y
 CONFIG_TIGON3=y
+CONFIG_BNX2=m
 CONFIG_CHELSIO_T1=m
 CONFIG_CHELSIO_T3=m
 CONFIG_EHEA=y
@@ -311,9 +314,7 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_LATENCYTOP=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_IRQSOFF_TRACER=y
 CONFIG_SCHED_TRACER=y
-CONFIG_STACK_TRACER=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y

trunk/arch/powerpc/include/asm/feature-fixups.h

@@ -37,18 +37,21 @@ label##2:						\
 	.align 2;					\
 label##3:
 
-#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect)	\
-label##4:						\
-	.popsection;					\
-	.pushsection sect,"a";				\
-	.align 3;					\
-label##5:					       	\
-	FTR_ENTRY_LONG msk;				\
-	FTR_ENTRY_LONG val;				\
-	FTR_ENTRY_OFFSET label##1b-label##5b;		\
-	FTR_ENTRY_OFFSET label##2b-label##5b;	 	\
-	FTR_ENTRY_OFFSET label##3b-label##5b;		\
-	FTR_ENTRY_OFFSET label##4b-label##5b;	 	\
+#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect)		\
+label##4:							\
+	.popsection;						\
+	.pushsection sect,"a";					\
+	.align 3;						\
+label##5:							\
+	FTR_ENTRY_LONG msk;					\
+	FTR_ENTRY_LONG val;					\
+	FTR_ENTRY_OFFSET label##1b-label##5b;			\
+	FTR_ENTRY_OFFSET label##2b-label##5b;			\
+	FTR_ENTRY_OFFSET label##3b-label##5b;			\
+	FTR_ENTRY_OFFSET label##4b-label##5b;			\
+	.ifgt (label##4b-label##3b)-(label##2b-label##1b);	\
+	.error "Feature section else case larger than body";	\
+	.endif;							\
 	.popsection;
 
 

trunk/arch/powerpc/include/asm/immap_qe.h

@@ -467,13 +467,22 @@ struct qe_immap {
 extern struct qe_immap __iomem *qe_immr;
 extern phys_addr_t get_qe_base(void);
 
-static inline unsigned long immrbar_virt_to_phys(void *address)
+/*
+ * Returns the offset within the QE address space of the given pointer.
+ *
+ * Note that the QE does not support 36-bit physical addresses, so if
+ * get_qe_base() returns a number above 4GB, the caller will probably fail.
+ */
+static inline phys_addr_t immrbar_virt_to_phys(void *address)
 {
-	if ( ((u32)address >= (u32)qe_immr) &&
-			((u32)address < ((u32)qe_immr + QE_IMMAP_SIZE)) )
-		return (unsigned long)(address - (u32)qe_immr +
-				(u32)get_qe_base());
-	return (unsigned long)virt_to_phys(address);
+	void *q = (void *)qe_immr;
+
+	/* Is it a MURAM address? */
+	if ((address >= q) && (address < (q + QE_IMMAP_SIZE)))
+		return get_qe_base() + (address - q);
+
+	/* It's an address returned by kmalloc */
+	return virt_to_phys(address);
 }
 
 #endif /* __KERNEL__ */

trunk/arch/powerpc/include/asm/irqflags.h

@@ -12,24 +12,44 @@
 
 #else
 #ifdef CONFIG_TRACE_IRQFLAGS
+#ifdef CONFIG_IRQSOFF_TRACER
+/*
+ * Since the ftrace irqsoff latency trace checks CALLER_ADDR1,
+ * which is the stack frame here, we need to force a stack frame
+ * in case we came from user space.
+ */
+#define TRACE_WITH_FRAME_BUFFER(func)		\
+	mflr	r0;				\
+	stdu	r1, -32(r1);			\
+	std	r0, 16(r1);			\
+	stdu	r1, -32(r1);			\
+	bl func;				\
+	ld	r1, 0(r1);			\
+	ld	r1, 0(r1);
+#else
+#define TRACE_WITH_FRAME_BUFFER(func)		\
+	bl func;
+#endif
+
 /*
  * Most of the CPU's IRQ-state tracing is done from assembly code; we
  * have to call a C function so call a wrapper that saves all the
  * C-clobbered registers.
  */
-#define TRACE_ENABLE_INTS	bl .trace_hardirqs_on
-#define TRACE_DISABLE_INTS	bl .trace_hardirqs_off
-#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip)	\
-	cmpdi	en,0;				\
-	bne	95f;				\
-	stb	en,PACASOFTIRQEN(r13);		\
-	bl	.trace_hardirqs_off;		\
-	b	skip;				\
-95:	bl	.trace_hardirqs_on;		\
+#define TRACE_ENABLE_INTS	TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_on)
+#define TRACE_DISABLE_INTS	TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_off)
+
+#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip)		\
+	cmpdi	en,0;					\
+	bne	95f;					\
+	stb	en,PACASOFTIRQEN(r13);			\
+	TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_off)	\
+	b	skip;					\
+95:	TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_on)	\
 	li	en,1;
 #define TRACE_AND_RESTORE_IRQ(en)		\
 	TRACE_AND_RESTORE_IRQ_PARTIAL(en,96f);	\
-	stb	en,PACASOFTIRQEN(r13);	        \
+	stb	en,PACASOFTIRQEN(r13);		\
 96:
 #else
 #define TRACE_ENABLE_INTS