Merge remote-tracking branch 'tip/core/rcu' into next.2012.09.25b

Resolved conflict in kernel/sched/core.c using Peter Zijlstra's
approach from https://lkml.org/lkml/2012/9/5/585.

Documentation/i2c/busses/i2c-i801

@@ -21,6 +21,7 @@ Supported adapters:
   * Intel DH89xxCC (PCH)
   * Intel Panther Point (PCH)
   * Intel Lynx Point (PCH)
+  * Intel Lynx Point-LP (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller

MAINTAINERS

@@ -3388,7 +3388,7 @@ M:	"Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
 L:	linux-i2c@vger.kernel.org
 W:	http://i2c.wiki.kernel.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
-T:	git git://git.fluff.org/bjdooks/linux.git
+T:	git git://git.pengutronix.de/git/wsa/linux.git
 S:	Maintained
 F:	Documentation/i2c/
 F:	drivers/i2c/
@@ -3666,11 +3666,12 @@ F:	Documentation/networking/README.ipw2200
 F:	drivers/net/wireless/ipw2x00/
 
 INTEL(R) TRUSTED EXECUTION TECHNOLOGY (TXT)
-M:	Joseph Cihula <joseph.cihula@intel.com>
+M:	Richard L Maliszewski <richard.l.maliszewski@intel.com>
+M:	Gang Wei <gang.wei@intel.com>
 M:	Shane Wang <shane.wang@intel.com>
 L:	tboot-devel@lists.sourceforge.net
 W:	http://tboot.sourceforge.net
-T:	Mercurial http://www.bughost.org/repos.hg/tboot.hg
+T:	hg http://tboot.hg.sourceforge.net:8000/hgroot/tboot/tboot
 S:	Supported
 F:	Documentation/intel_txt.txt
 F:	include/linux/tboot.h

Makefile

@@ -1,8 +1,8 @@
 VERSION = 3
 PATCHLEVEL = 6
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
-NAME = Saber-toothed Squirrel
+EXTRAVERSION = -rc7
+NAME = Terrified Chipmunk
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"

arch/arm/Kconfig.debug

@@ -356,15 +356,15 @@ choice
 		  is nothing connected to read from the DCC.
 
 	config DEBUG_SEMIHOSTING
-		bool "Kernel low-level debug output via semihosting I"
+		bool "Kernel low-level debug output via semihosting I/O"
 		help
 		  Semihosting enables code running on an ARM target to use
 		  the I/O facilities on a host debugger/emulator through a
-		  simple SVC calls. The host debugger or emulator must have
+		  simple SVC call. The host debugger or emulator must have
 		  semihosting enabled for the special svc call to be trapped
 		  otherwise the kernel will crash.
 
-		  This is known to work with OpenOCD, as wellas
+		  This is known to work with OpenOCD, as well as
 		  ARM's Fast Models, or any other controlling environment
 		  that implements semihosting.
 

arch/arm/Makefile

@@ -284,10 +284,10 @@ zImage Image xipImage bootpImage uImage: vmlinux
 zinstall uinstall install: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
 
-%.dtb:
+%.dtb: scripts
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
-dtbs:
+dtbs: scripts
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
 
 # We use MRPROPER_FILES and CLEAN_FILES now

arch/arm/boot/compressed/head.S

@@ -653,16 +653,21 @@ __armv7_mmu_cache_on:
 		mcrne	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
 #endif
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
+		bic	r0, r0, #1 << 28	@ clear SCTLR.TRE
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x003c		@ write buffer
 #ifdef CONFIG_MMU
 #ifdef CONFIG_CPU_ENDIAN_BE8
 		orr	r0, r0, #1 << 25	@ big-endian page tables
 #endif
+		mrcne   p15, 0, r6, c2, c0, 2   @ read ttb control reg
 		orrne	r0, r0, #1		@ MMU enabled
 		movne	r1, #0xfffffffd		@ domain 0 = client
+		bic     r6, r6, #1 << 31        @ 32-bit translation system
+		bic     r6, r6, #3 << 0         @ use only ttbr0
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
+		mcrne   p15, 0, r6, c2, c0, 2   @ load ttb control
 #endif
 		mcr	p15, 0, r0, c7, c5, 4	@ ISB
 		mcr	p15, 0, r0, c1, c0, 0	@ load control register

arch/arm/boot/dts/at91sam9260.dtsi

@@ -104,6 +104,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioB: gpio@fffff600 {
@@ -113,6 +114,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioC: gpio@fffff800 {
@@ -122,6 +124,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			dbgu: serial@fffff200 {

arch/arm/boot/dts/at91sam9263.dtsi

@@ -95,6 +95,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioB: gpio@fffff400 {
@@ -104,6 +105,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioC: gpio@fffff600 {
@@ -113,6 +115,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioD: gpio@fffff800 {
@@ -122,6 +125,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioE: gpio@fffffa00 {
@@ -131,6 +135,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			dbgu: serial@ffffee00 {

arch/arm/boot/dts/at91sam9g45.dtsi

@@ -113,6 +113,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioB: gpio@fffff400 {
@@ -122,6 +123,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioC: gpio@fffff600 {
@@ -131,6 +133,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioD: gpio@fffff800 {
@@ -140,6 +143,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioE: gpio@fffffa00 {
@@ -149,6 +153,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			dbgu: serial@ffffee00 {

arch/arm/boot/dts/at91sam9n12.dtsi

@@ -107,6 +107,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioB: gpio@fffff600 {
@@ -116,6 +117,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioC: gpio@fffff800 {
@@ -125,6 +127,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioD: gpio@fffffa00 {
@@ -134,6 +137,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			dbgu: serial@fffff200 {

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -115,6 +115,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioB: gpio@fffff600 {
@@ -124,6 +125,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioC: gpio@fffff800 {
@@ -133,6 +135,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			pioD: gpio@fffffa00 {
@@ -142,6 +145,7 @@
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
+				#interrupt-cells = <2>;
 			};
 
 			dbgu: serial@fffff200 {

arch/arm/include/asm/assembler.h

@@ -320,4 +320,12 @@
 	.size \name , . - \name
 	.endm
 
+	.macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req
+#ifndef CONFIG_CPU_USE_DOMAINS
+	adds	\tmp, \addr, #\size - 1
+	sbcccs	\tmp, \tmp, \limit
+	bcs	\bad
+#endif
+	.endm
+
 #endif /* __ASM_ASSEMBLER_H__ */

arch/arm/include/asm/memory.h

@@ -187,6 +187,7 @@ static inline unsigned long __phys_to_virt(unsigned long x)
 #define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
 #endif
 #endif
+#endif /* __ASSEMBLY__ */
 
 #ifndef PHYS_OFFSET
 #ifdef PLAT_PHYS_OFFSET
@@ -196,6 +197,8 @@ static inline unsigned long __phys_to_virt(unsigned long x)
 #endif
 #endif
 
+#ifndef __ASSEMBLY__
+
 /*
  * PFNs are used to describe any physical page; this means
  * PFN 0 == physical address 0.

arch/arm/include/asm/tlb.h

@@ -199,13 +199,17 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
 {
 	pgtable_page_dtor(pte);
 
+#ifdef CONFIG_ARM_LPAE
+	tlb_add_flush(tlb, addr);
+#else
 	/*
 	 * With the classic ARM MMU, a pte page has two corresponding pmd
 	 * entries, each covering 1MB.
 	 */
 	addr &= PMD_MASK;
 	tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE);
 	tlb_add_flush(tlb, addr + SZ_1M);
+#endif
 
 	tlb_remove_page(tlb, pte);
 }