---

yaml
---
r: 17272
b: refs/heads/master
c: f49cc15
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: eb3daf3c5acfa737bdf2bd9d1f93c3393dde5067
+refs/heads/master: f49cc15bbe37b767286fdd7abe65810e750cf70a

trunk/drivers/media/dvb/ttpci/budget-core.c

@@ -404,9 +404,7 @@ int ttpci_budget_init(struct budget *budget, struct saa7146_dev *dev,
 	tasklet_init(&budget->vpe_tasklet, vpeirq, (unsigned long) budget);
 
 	/* frontend power on */
-	if (bi->type == BUDGET_FS_ACTIVY)
-		saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI);
-	else
+	if (bi->type != BUDGET_FS_ACTIVY)
 		saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI);
 
 	if (budget_register(budget) == 0) {

trunk/drivers/media/dvb/ttpci/budget.c

@@ -112,6 +112,7 @@ static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long
  *   Routines for the Fujitsu Siemens Activy budget card
  *   22 kHz tone and DiSEqC are handled by the frontend.
  *   Voltage must be set here.
+ *   GPIO 1: LNBP EN, GPIO 2: LNBP VSEL
  */
 static int SetVoltage_Activy (struct budget *budget, fe_sec_voltage_t voltage)
 {
@@ -121,11 +122,16 @@ static int SetVoltage_Activy (struct budget *budget, fe_sec_voltage_t voltage)
 
 	switch (voltage) {
 		case SEC_VOLTAGE_13:
+			saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI);
 			saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTLO);
 			break;
 		case SEC_VOLTAGE_18:
+			saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI);
 			saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI);
 			break;
+		case SEC_VOLTAGE_OFF:
+			saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTLO);
+			break;
 		default:
 			return -EINVAL;
 	}
@@ -580,6 +586,7 @@ static void frontend_init(struct budget *budget)
 		if (budget->dvb_frontend) {
 			budget->dvb_frontend->ops->set_voltage = lnbp21_set_voltage;
 			budget->dvb_frontend->ops->enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage;
+			budget->dvb_frontend->ops->dishnetwork_send_legacy_command = NULL;
 			if (lnbp21_init(budget)) {
 				printk("%s: No LNBP21 found!\n", __FUNCTION__);
 				goto error_out;
@@ -624,15 +631,15 @@ static void frontend_init(struct budget *budget)
 		budget->dvb_frontend = stv0299_attach(&alps_bsru6_config, &budget->i2c_adap);
 		if (budget->dvb_frontend) {
 			budget->dvb_frontend->ops->set_voltage = siemens_budget_set_voltage;
-			break;
+			budget->dvb_frontend->ops->dishnetwork_send_legacy_command = NULL;
 		}
 		break;
 
 	case 0x4f61: // Fujitsu Siemens Activy Budget-S PCI rev GR (tda8083/Grundig 29504-451(tsa5522))
 		budget->dvb_frontend = tda8083_attach(&grundig_29504_451_config, &budget->i2c_adap);
 		if (budget->dvb_frontend) {
 			budget->dvb_frontend->ops->set_voltage = siemens_budget_set_voltage;
-			break;
+			budget->dvb_frontend->ops->dishnetwork_send_legacy_command = NULL;
 		}
 		break;