---

yaml
---
r: 28095
b: refs/heads/master
c: 466e622
h: refs/heads/master
i:
  28093: 1066a16
  28091: 83e0186
  28087: 26a4b43
  28079: 533f65b
  28063: af8f685
  28031: 6df91db
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 82c583e3ae31ffa76d1280197274cc1e1cde3179
+refs/heads/master: 466e6227e6a54d9b94b50972612fe8bf0450f786

trunk/arch/arm/mach-at91rm9200/board-csb337.c

@@ -24,6 +24,7 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/spi/spi.h>
 
 #include <asm/hardware.h>
 #include <asm/setup.h>
@@ -35,8 +36,8 @@
 #include <asm/mach/irq.h>
 
 #include <asm/arch/hardware.h>
-#include <asm/mach/serial_at91rm9200.h>
 #include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
 
 #include "generic.h"
 
@@ -54,32 +55,24 @@ static void __init csb337_init_irq(void)
  *    0 .. 3 = USART0 .. USART3
  *    4      = DBGU
  */
-#define CSB337_UART_MAP		{ 4, 1, -1, -1, -1 }	/* ttyS0, ..., ttyS4 */
-#define CSB337_SERIAL_CONSOLE	0			/* ttyS0 */
+static struct at91_uart_config __initdata csb337_uart_config = {
+	.console_tty	= 0,				/* ttyS0 */
+	.nr_tty		= 2,
+	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
+};
 
 static void __init csb337_map_io(void)
 {
-	int serial[AT91_NR_UART] = CSB337_UART_MAP;
-	int i;
-
 	at91rm9200_map_io();
 
 	/* Initialize clocks: 3.6864 MHz crystal */
 	at91_clock_init(3686400);
 
 	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-
-#ifdef CONFIG_SERIAL_AT91
-	at91_console_port = CSB337_SERIAL_CONSOLE;
-	memcpy(at91_serial_map, serial, sizeof(serial));
-
-	/* Register UARTs */
-	for (i = 0; i < AT91_NR_UART; i++) {
-		if (serial[i] >= 0)
-			at91_register_uart(i, serial[i]);
-	}
-#endif
+	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
+
+	/* Setup the serial ports and console */
+	at91_init_serial(&csb337_uart_config);
 }
 
 static struct at91_eth_data __initdata csb337_eth_data = {
@@ -118,17 +111,31 @@ static struct at91_mmc_data __initdata csb337_mmc_data = {
 	.wp_pin		= AT91_PIN_PD6,
 };
 
+static struct spi_board_info csb337_spi_devices[] = {
+	{	/* CAN controller */
+		.modalias	= "sak82c900",
+		.chip_select	= 0,
+		.max_speed_hz	= 6 * 1000 * 1000,
+	},
+};
+
 static void __init csb337_board_init(void)
 {
+	/* Serial */
+	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&csb337_eth_data);
 	/* USB Host */
 	at91_add_device_usbh(&csb337_usbh_data);
 	/* USB Device */
 	at91_add_device_udc(&csb337_udc_data);
+	/* I2C */
+	at91_add_device_i2c();
 	/* Compact Flash */
 	at91_set_gpio_input(AT91_PIN_PB22, 1);		/* IOIS16 */
 	at91_add_device_cf(&csb337_cf_data);
+	/* SPI */
+	at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
 	/* MMC */
 	at91_add_device_mmc(&csb337_mmc_data);
 }

trunk/arch/arm/mach-at91rm9200/board-csb637.c

@@ -35,8 +35,8 @@
 #include <asm/mach/irq.h>
 
 #include <asm/arch/hardware.h>
-#include <asm/mach/serial_at91rm9200.h>
 #include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
 
 #include "generic.h"
 
@@ -54,14 +54,14 @@ static void __init csb637_init_irq(void)
  *    0 .. 3 = USART0 .. USART3
  *    4      = DBGU
  */
-#define CSB637_UART_MAP		{ 4, 1, -1, -1, -1 }	/* ttyS0, ..., ttyS4 */
-#define CSB637_SERIAL_CONSOLE	0			/* ttyS0 */
+static struct at91_uart_config __initdata csb637_uart_config = {
+	.console_tty	= 0,				/* ttyS0 */
+	.nr_tty		= 2,
+	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
+};
 
 static void __init csb637_map_io(void)
 {
-	int serial[AT91_NR_UART] = CSB637_UART_MAP;
-	int i;
-
 	at91rm9200_map_io();
 
 	/* Initialize clocks: 3.6864 MHz crystal */
@@ -70,16 +70,8 @@ static void __init csb637_map_io(void)
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
 
-#ifdef CONFIG_SERIAL_AT91
-	at91_console_port = CSB637_SERIAL_CONSOLE;
-	memcpy(at91_serial_map, serial, sizeof(serial));
-
-	/* Register UARTs */
-	for (i = 0; i < AT91_NR_UART; i++) {
-		if (serial[i] >= 0)
-			at91_register_uart(i, serial[i]);
-	}
-#endif
+	/* Setup the serial ports and console */
+	at91_init_serial(&csb637_uart_config);
 }
 
 static struct at91_eth_data __initdata csb637_eth_data = {
@@ -98,12 +90,18 @@ static struct at91_udc_data __initdata csb637_udc_data = {
 
 static void __init csb637_board_init(void)
 {
+	/* Serial */
+	at91_add_device_serial();
 	/* Ethernet */
 	at91_add_device_eth(&csb637_eth_data);
 	/* USB Host */
 	at91_add_device_usbh(&csb637_usbh_data);
 	/* USB Device */
 	at91_add_device_udc(&csb637_udc_data);
+	/* I2C */
+	at91_add_device_i2c();
+	/* SPI */
+	at91_add_device_spi(NULL, 0);
 }
 
 MACHINE_START(CSB637, "Cogent CSB637")