PM: Optional beeping during resume from suspend to RAM

Add a feature allowing the user to make the system beep during a resume from
suspend to RAM, on x86_64 and i386.

This is useful for the users with broken resume from RAM, so that they can
verify if the control reaches the kernel after a wake-up event.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/i386/kernel/acpi/wakeup.S

@@ -13,6 +13,21 @@
 # cs = 0x1234, eip = 0x05
 # 
 
+#define BEEP \
+	inb	$97, %al; 	\
+	outb	%al, $0x80; 	\
+	movb	$3, %al; 	\
+	outb	%al, $97; 	\
+	outb	%al, $0x80; 	\
+	movb	$-74, %al; 	\
+	outb	%al, $67; 	\
+	outb	%al, $0x80; 	\
+	movb	$-119, %al; 	\
+	outb	%al, $66; 	\
+	outb	%al, $0x80; 	\
+	movb	$15, %al; 	\
+	outb	%al, $66;
+
 ALIGN
 	.align	4096
 ENTRY(wakeup_start)
@@ -31,6 +46,11 @@ wakeup_code:
 	movw	%cs, %ax
 	movw	%ax, %ds					# Make ds:0 point to wakeup_start
 	movw	%ax, %ss
+
+	testl   $1, beep_flags - wakeup_code
+	jz      1f
+	BEEP
+1:
 	mov	$(wakeup_stack - wakeup_code), %sp		# Private stack is needed for ASUS board
 	movw	$0x0e00 + 'S', %fs:(0x12)
 
@@ -88,6 +108,10 @@ wakeup_code:
 	cmpl	$0x12345678, %eax
 	jne	bogus_real_magic
 
+	testl   $2, beep_flags - wakeup_code
+	jz      1f
+	BEEP
+1:
 	ljmpl	$__KERNEL_CS,$wakeup_pmode_return
 
 real_save_gdt:	.word 0
@@ -98,6 +122,7 @@ real_save_cr4:	.long 0
 real_magic:	.long 0
 video_mode:	.long 0
 video_flags:	.long 0
+beep_flags:	.long 0
 real_efer_save_restore:	.long 0
 real_save_efer_edx: 	.long 0
 real_save_efer_eax: 	.long 0
@@ -262,6 +287,8 @@ ENTRY(acpi_copy_wakeup_routine)
 	movl	%edx, video_mode - wakeup_start (%eax)
 	movl	acpi_video_flags, %edx
 	movl	%edx, video_flags - wakeup_start (%eax)
+	movl	s2ram_beep, %edx
+	movl	%edx, beep_flags - wakeup_start (%eax)
 	movl	$0x12345678, real_magic - wakeup_start (%eax)
 	movl	$0x12345678, saved_magic
 	popl	%ebx

arch/x86_64/kernel/acpi/wakeup.S

@@ -16,6 +16,21 @@
 # cs = 0x1234, eip = 0x05
 #
 
+#define BEEP \
+	inb	$97, %al; 	\
+	outb	%al, $0x80; 	\
+	movb	$3, %al; 	\
+	outb	%al, $97; 	\
+	outb	%al, $0x80; 	\
+	movb	$-74, %al; 	\
+	outb	%al, $67; 	\
+	outb	%al, $0x80; 	\
+	movb	$-119, %al; 	\
+	outb	%al, $66; 	\
+	outb	%al, $0x80; 	\
+	movb	$15, %al; 	\
+	outb	%al, $66;
+
 
 ALIGN
 	.align	16
@@ -33,6 +48,13 @@ wakeup_code:
 	movw	%cs, %ax
 	movw	%ax, %ds		# Make ds:0 point to wakeup_start
 	movw	%ax, %ss
+
+	# Data segment must be set up before we can see whether to beep.
+	testl   $1, beep_flags - wakeup_code
+	jz      1f
+	BEEP
+1:
+
 					# Private stack is needed for ASUS board
 	mov	$(wakeup_stack - wakeup_code), %sp
 
@@ -229,6 +251,7 @@ gdt_48a:
 	.long   gdta - wakeup_code              # gdt base (relocated in later)
 
 real_magic:	.quad 0
+beep_flags:	.quad 0
 video_mode:	.quad 0
 video_flags:	.quad 0
 
@@ -344,6 +367,8 @@ ENTRY(acpi_copy_wakeup_routine)
 	pushq	%rax
 	pushq	%rdx
 
+	movl	s2ram_beep, %edx
+	movl	%edx, beep_flags - wakeup_start (,%rdi)
 	movl	saved_video_mode, %edx
 	movl	%edx, video_mode - wakeup_start (,%rdi)
 	movl	acpi_video_flags, %edx

include/linux/acpi.h

@@ -123,6 +123,7 @@ extern int pci_mmcfg_config_num;
 
 extern int sbf_port;
 extern unsigned long acpi_video_flags;
+extern unsigned long s2ram_beep;
 
 #else	/* !CONFIG_ACPI */
 

kernel/power/main.c

@@ -332,6 +332,27 @@ static ssize_t state_store(struct kset *kset, const char *buf, size_t n)
 
 power_attr(state);
 
+unsigned long s2ram_beep = 0;
+
+static ssize_t s2ram_beep_show(struct kset *kset, char *buf)
+{
+	return sprintf(buf, "%d\n", s2ram_beep);
+}
+
+static ssize_t
+s2ram_beep_store(struct kset *kset, const char *buf, size_t n)
+{
+	int val;
+
+	if (sscanf(buf, "%d", &val) > 0) {
+		s2ram_beep = val;
+		return n;
+	}
+	return -EINVAL;
+}
+
+power_attr(s2ram_beep);
+
 #ifdef CONFIG_PM_TRACE
 int pm_trace_enabled;
 
@@ -357,11 +378,13 @@ power_attr(pm_trace);
 static struct attribute * g[] = {
 	&state_attr.attr,
 	&pm_trace_attr.attr,
+	&s2ram_beep_attr.attr,
 	NULL,
 };
 #else
 static struct attribute * g[] = {
 	&state_attr.attr,
+	&s2ram_beep_attr.attr,
 	NULL,
 };
 #endif /* CONFIG_PM_TRACE */