---

yaml
---
r: 284597
b: refs/heads/master
c: 0e11331
h: refs/heads/master
i:
  284595: fc16531
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 21ebd6c68b5511b55f4f456e4ba17c2d711e3617
+refs/heads/master: 0e1133157986340e80a1c65ebf3bd20b74eb8075

trunk/Documentation/filesystems/ceph.txt

@@ -119,20 +119,12 @@ Mount Options
 	must rely on TCP's error correction to detect data corruption
 	in the data payload.
 
-  dcache
-        Use the dcache contents to perform negative lookups and
-        readdir when the client has the entire directory contents in
-        its cache.  (This does not change correctness; the client uses
-        cached metadata only when a lease or capability ensures it is
-        valid.)
-
-  nodcache
-        Do not use the dcache as above.  This avoids a significant amount of
-        complex code, sacrificing performance without affecting correctness,
-        and is useful for tracking down bugs.
-
   noasyncreaddir
-	Do not use the dcache as above for readdir.
+	Disable client's use its local cache to satisfy	readdir
+	requests.  (This does not change correctness; the client uses
+	cached metadata only when a lease or capability ensures it is
+	valid.)
+
 
 More Information
 ================

trunk/Documentation/filesystems/squashfs.txt

@@ -93,8 +93,8 @@ byte alignment:
 
 Compressed data blocks are written to the filesystem as files are read from
 the source directory, and checked for duplicates.  Once all file data has been
-written the completed inode, directory, fragment, export, uid/gid lookup and
-xattr tables are written.
+written the completed inode, directory, fragment, export and uid/gid lookup
+tables are written.
 
 3.1 Compression options
 -----------------------
@@ -151,7 +151,7 @@ in each metadata block.  Directories are sorted in alphabetical order,
 and at lookup the index is scanned linearly looking for the first filename
 alphabetically larger than the filename being looked up.  At this point the
 location of the metadata block the filename is in has been found.
-The general idea of the index is to ensure only one metadata block needs to be
+The general idea of the index is ensure only one metadata block needs to be
 decompressed to do a lookup irrespective of the length of the directory.
 This scheme has the advantage that it doesn't require extra memory overhead
 and doesn't require much extra storage on disk.

trunk/Documentation/mmc/mmc-dev-attrs.txt

@@ -64,13 +64,3 @@ Note on Erase Size and Preferred Erase Size:
 	size specified by the card.
 
 	"preferred_erase_size" is in bytes.
-
-SD/MMC/SDIO Clock Gating Attribute
-==================================
-
-Read and write access is provided to following attribute.
-This attribute appears only if CONFIG_MMC_CLKGATE is enabled.
-
-	clkgate_delay	Tune the clock gating delay with desired value in milliseconds.
-
-echo <desired delay> > /sys/class/mmc_host/mmcX/clkgate_delay

trunk/Documentation/mmc/mmc-dev-parts.txt

@@ -25,16 +25,3 @@ echo 0 > /sys/block/mmcblkXbootY/force_ro
 To re-enable read-only access:
 
 echo 1 > /sys/block/mmcblkXbootY/force_ro
-
-The boot partitions can also be locked read only until the next power on,
-with:
-
-echo 1 > /sys/block/mmcblkXbootY/ro_lock_until_next_power_on
-
-This is a feature of the card and not of the kernel. If the card does
-not support boot partition locking, the file will not exist. If the
-feature has been disabled on the card, the file will be read-only.
-
-The boot partitions can also be locked permanently, but this feature is
-not accessible through sysfs in order to avoid accidental or malicious
-bricking.

trunk/arch/arm/mach-sa1100/assabet.c

@@ -202,7 +202,6 @@ static struct irda_platform_data assabet_irda_data = {
 static struct mcp_plat_data assabet_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
-	.codec		= "ucb1x00",
 };
 
 static void __init assabet_init(void)
@@ -253,17 +252,6 @@ static void __init assabet_init(void)
 	sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources,
 			    ARRAY_SIZE(assabet_flash_resources));
 	sa11x0_register_irda(&assabet_irda_data);
-
-	/*
-	 * Setup the PPC unit correctly.
-	 */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
-	ASSABET_BCR_set(ASSABET_BCR_CODEC_RST);
 	sa11x0_register_mcp(&assabet_mcp_data);
 }
 

trunk/arch/arm/mach-sa1100/cerf.c

@@ -124,23 +124,12 @@ static void __init cerf_map_io(void)
 static struct mcp_plat_data cerf_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
-	.codec		= "ucb1x00",
 };
 
 static void __init cerf_init(void)
 {
 	platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices));
 	sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1);
-
-	/*
-	 * Setup the PPC unit correctly.
-	 */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
 	sa11x0_register_mcp(&cerf_mcp_data);
 }
 

trunk/arch/arm/mach-sa1100/collie.c

@@ -27,7 +27,6 @@
 #include <linux/timer.h>
 #include <linux/gpio.h>
 #include <linux/pda_power.h>
-#include <linux/mfd/ucb1x00.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -86,15 +85,10 @@ static struct scoop_pcmcia_config collie_pcmcia_config = {
 	.num_devs	= 1,
 };
 
-static struct ucb1x00_plat_data collie_ucb1x00_data = {
-	.gpio_base	= COLLIE_TC35143_GPIO_BASE,
-};
-
 static struct mcp_plat_data collie_mcp_data = {
 	.mccr0		= MCCR0_ADM | MCCR0_ExtClk,
 	.sclk_rate	= 9216000,
-	.codec		= "ucb1x00",
-	.codec_pdata	= &collie_ucb1x00_data,
+	.gpio_base	= COLLIE_TC35143_GPIO_BASE,
 };
 
 /*
@@ -357,16 +351,6 @@ static void __init collie_init(void)
 
 	sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
 			    ARRAY_SIZE(collie_flash_resources));
-
-	/*
-	 * Setup the PPC unit correctly.
-	 */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
 	sa11x0_register_mcp(&collie_mcp_data);
 
 	sharpsl_save_param();

trunk/arch/arm/mach-sa1100/generic.c

@@ -217,15 +217,10 @@ static struct platform_device sa11x0uart3_device = {
 static struct resource sa11x0mcp_resources[] = {
 	[0] = {
 		.start	= __PREG(Ser4MCCR0),
-		.end	= __PREG(Ser4MCCR0) + 0x1C - 1,
+		.end	= __PREG(Ser4MCCR0) + 0xffff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= __PREG(Ser4MCCR1),
-		.end	= __PREG(Ser4MCCR1) + 0x4 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
 		.start	= IRQ_Ser4MCP,
 		.end	= IRQ_Ser4MCP,
 		.flags	= IORESOURCE_IRQ,

trunk/arch/arm/mach-sa1100/include/mach/mcp.h

@@ -17,8 +17,6 @@ struct mcp_plat_data {
 	u32 mccr1;
 	unsigned int sclk_rate;
 	int gpio_base;
-	const char *codec;
-	void *codec_pdata;
 };
 
 #endif

trunk/arch/arm/mach-sa1100/lart.c

@@ -24,20 +24,10 @@
 static struct mcp_plat_data lart_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
-	.codec		= "ucb1x00",
 };
 
 static void __init lart_init(void)
 {
-	/*
-	 * Setup the PPC unit correctly.
-	 */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
 	sa11x0_register_mcp(&lart_mcp_data);
 }
 

trunk/arch/arm/mach-sa1100/shannon.c

@@ -55,22 +55,11 @@ static struct resource shannon_flash_resource = {
 static struct mcp_plat_data shannon_mcp_data = {
 	.mccr0		= MCCR0_ADM,
 	.sclk_rate	= 11981000,
-	.codec		= "ucb1x00",
 };
 
 static void __init shannon_init(void)
 {
 	sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1);
-
-	/*
-	 * Setup the PPC unit correctly.
-	 */
-	PPDR &= ~PPC_RXD4;
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PSDR |= PPC_RXD4;
-	PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
 	sa11x0_register_mcp(&shannon_mcp_data);
 }