x86: mce: Remove old i386 machine check code

As announced in feature-remove-schedule.txt remove CONFIG_X86_OLD_MCE

This patch only removes code.

The ancient machine check code for very old systems that are not supported
by CONFIG_X86_NEW_MCE is still kept.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Documentation/feature-removal-schedule.txt

@@ -444,13 +444,3 @@ What:	CONFIG_RFKILL_INPUT
 When:	2.6.33
 Why:	Should be implemented in userspace, policy daemon.
 Who:	Johannes Berg <johannes@sipsolutions.net>
-
-----------------------------
-
-What:	CONFIG_X86_OLD_MCE
-When:	2.6.32
-Why:	Remove the old legacy 32bit machine check code. This has been
-	superseded by the newer machine check code from the 64bit port,
-	but the old version has been kept around for easier testing. Note this
-	doesn't impact the old P5 and WinChip machine check handlers.
-Who:	Andi Kleen <andi@firstfloor.org>

arch/x86/Kconfig

@@ -781,21 +781,10 @@ config X86_MCE
 	  The action the kernel takes depends on the severity of the problem,
 	  ranging from warning messages to halting the machine.
 
-config X86_OLD_MCE
-	depends on X86_32 && X86_MCE
-	bool "Use legacy machine check code (will go away)"
-	default n
-	select X86_ANCIENT_MCE
-	---help---
-	  Use the old i386 machine check code. This is merely intended for
-	  testing in a transition period. Try this if you run into any machine
-	  check related software problems, but report the problem to
-	  linux-kernel.  When in doubt say no.
-
 config X86_NEW_MCE
 	depends on X86_MCE
 	bool
-	default y if (!X86_OLD_MCE && X86_32) || X86_64
+	default y
 
 config X86_MCE_INTEL
 	def_bool y
@@ -835,29 +824,9 @@ config X86_MCE_INJECT
 	  If you don't know what a machine check is and you don't do kernel
 	  QA it is safe to say n.
 
-config X86_MCE_NONFATAL
-	tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
-	depends on X86_OLD_MCE
-	---help---
-	  Enabling this feature starts a timer that triggers every 5 seconds which
-	  will look at the machine check registers to see if anything happened.
-	  Non-fatal problems automatically get corrected (but still logged).
-	  Disable this if you don't want to see these messages.
-	  Seeing the messages this option prints out may be indicative of dying
-	  or out-of-spec (ie, overclocked) hardware.
-	  This option only does something on certain CPUs.
-	  (AMD Athlon/Duron and Intel Pentium 4)
-
-config X86_MCE_P4THERMAL
-	bool "check for P4 thermal throttling interrupt."
-	depends on X86_OLD_MCE && X86_MCE && (X86_UP_APIC || SMP)
-	---help---
-	  Enabling this feature will cause a message to be printed when the P4
-	  enters thermal throttling.
-
 config X86_THERMAL_VECTOR
 	def_bool y
-	depends on X86_MCE_P4THERMAL || X86_MCE_INTEL
+	depends on X86_MCE_INTEL
 
 config VM86
 	bool "Enable VM86 support" if EMBEDDED

arch/x86/include/asm/mce.h

@@ -115,13 +115,6 @@ void mcheck_init(struct cpuinfo_x86 *c);
 static inline void mcheck_init(struct cpuinfo_x86 *c) {}
 #endif
 
-#ifdef CONFIG_X86_OLD_MCE
-extern int nr_mce_banks;
-void amd_mcheck_init(struct cpuinfo_x86 *c);
-void intel_p4_mcheck_init(struct cpuinfo_x86 *c);
-void intel_p6_mcheck_init(struct cpuinfo_x86 *c);
-#endif
-
 #ifdef CONFIG_X86_ANCIENT_MCE
 void intel_p5_mcheck_init(struct cpuinfo_x86 *c);
 void winchip_mcheck_init(struct cpuinfo_x86 *c);
@@ -208,11 +201,7 @@ extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
 
 void intel_init_thermal(struct cpuinfo_x86 *c);
 
-#ifdef CONFIG_X86_NEW_MCE
 void mce_log_therm_throt_event(__u64 status);
-#else
-static inline void mce_log_therm_throt_event(__u64 status) {}
-#endif
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_X86_MCE_H */

arch/x86/kernel/cpu/mcheck/Makefile

@@ -1,11 +1,9 @@
 obj-y				=  mce.o
 
 obj-$(CONFIG_X86_NEW_MCE)	+= mce-severity.o
-obj-$(CONFIG_X86_OLD_MCE)	+= k7.o p4.o p6.o
 obj-$(CONFIG_X86_ANCIENT_MCE)	+= winchip.o p5.o
 obj-$(CONFIG_X86_MCE_INTEL)	+= mce_intel.o
 obj-$(CONFIG_X86_MCE_AMD)	+= mce_amd.o
-obj-$(CONFIG_X86_MCE_NONFATAL)	+= non-fatal.o
 obj-$(CONFIG_X86_MCE_THRESHOLD) += threshold.o
 obj-$(CONFIG_X86_MCE_INJECT)	+= mce-inject.o
 

arch/x86/kernel/cpu/mcheck/mce.c

@@ -58,8 +58,6 @@ void (*machine_check_vector)(struct pt_regs *, long error_code) =
 
 int mce_disabled __read_mostly;
 
-#ifdef CONFIG_X86_NEW_MCE
-
 #define MISC_MCELOG_MINOR	227
 
 #define SPINUNIT 100	/* 100ns */
@@ -1993,51 +1991,6 @@ static __init int mce_init_device(void)
 
 device_initcall(mce_init_device);
 
-#else /* CONFIG_X86_OLD_MCE: */
-
-int nr_mce_banks;
-EXPORT_SYMBOL_GPL(nr_mce_banks);	/* non-fatal.o */
-
-/* This has to be run for each processor */
-void mcheck_init(struct cpuinfo_x86 *c)
-{
-	if (mce_disabled)
-		return;
-
-	switch (c->x86_vendor) {
-	case X86_VENDOR_AMD:
-		amd_mcheck_init(c);
-		break;
-
-	case X86_VENDOR_INTEL:
-		if (c->x86 == 5)
-			intel_p5_mcheck_init(c);
-		if (c->x86 == 6)
-			intel_p6_mcheck_init(c);
-		if (c->x86 == 15)
-			intel_p4_mcheck_init(c);
-		break;
-
-	case X86_VENDOR_CENTAUR:
-		if (c->x86 == 5)
-			winchip_mcheck_init(c);
-		break;
-
-	default:
-		break;
-	}
-	printk(KERN_INFO "mce: CPU supports %d MCE banks\n", nr_mce_banks);
-}
-
-static int __init mcheck_enable(char *str)
-{
-	mce_p5_enabled = 1;
-	return 1;
-}
-__setup("mce", mcheck_enable);
-
-#endif /* CONFIG_X86_OLD_MCE */
-
 /*
  * Old style boot options parsing. Only for compatibility.
  */