---

yaml
---
r: 300354
b: refs/heads/master
c: 5d12045
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 24ab82bd9bf18f3efc69a131d73577940941e1b7
+refs/heads/master: 5d1204582e7bc0682fb019e5666bd62cc27260b4

trunk/Documentation/feature-removal-schedule.txt

@@ -539,3 +539,13 @@ When:	3.6
 Why:	setitimer is not returning -EFAULT if user pointer is NULL. This
 	violates the spec.
 Who:	Sasikantha Babu <sasikanth.v19@gmail.com>
+
+----------------------------
+
+What:	V4L2_CID_HCENTER, V4L2_CID_VCENTER V4L2 controls
+When:	3.7
+Why:	The V4L2_CID_VCENTER, V4L2_CID_HCENTER controls have been deprecated
+	for about 4 years and they are not used by any mainline driver.
+	There are newer controls (V4L2_CID_PAN*, V4L2_CID_TILT*) that provide
+	similar	functionality.
+Who:	Sylwester Nawrocki <sylvester.nawrocki@gmail.com>

trunk/arch/arm/mach-prima2/irq.c

@@ -42,7 +42,8 @@ sirfsoc_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
 static __init void sirfsoc_irq_init(void)
 {
 	sirfsoc_alloc_gc(sirfsoc_intc_base, 0, 32);
-	sirfsoc_alloc_gc(sirfsoc_intc_base + 4, 32, SIRFSOC_INTENAL_IRQ_END - 32);
+	sirfsoc_alloc_gc(sirfsoc_intc_base + 4, 32,
+			SIRFSOC_INTENAL_IRQ_END + 1 - 32);
 
 	writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0);
 	writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1);
@@ -68,7 +69,8 @@ void __init sirfsoc_of_irq_init(void)
 	if (!sirfsoc_intc_base)
 		panic("unable to map intc cpu registers\n");
 
-	irq_domain_add_legacy(np, 32, 0, 0, &irq_domain_simple_ops, NULL);
+	irq_domain_add_legacy(np, SIRFSOC_INTENAL_IRQ_END + 1, 0, 0,
+		&irq_domain_simple_ops, NULL);
 
 	of_node_put(np);
 

trunk/arch/arm/mach-tegra/flowctrl.c

@@ -53,10 +53,10 @@ static void flowctrl_update(u8 offset, u32 value)
 
 void flowctrl_write_cpu_csr(unsigned int cpuid, u32 value)
 {
-	return flowctrl_update(flowctrl_offset_halt_cpu[cpuid], value);
+	return flowctrl_update(flowctrl_offset_cpu_csr[cpuid], value);
 }
 
 void flowctrl_write_cpu_halt(unsigned int cpuid, u32 value)
 {
-	return flowctrl_update(flowctrl_offset_cpu_csr[cpuid], value);
+	return flowctrl_update(flowctrl_offset_halt_cpu[cpuid], value);
 }

trunk/arch/arm/mm/fault.c

@@ -247,7 +247,9 @@ __do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
 	return handle_mm_fault(mm, vma, addr & PAGE_MASK, flags);
 
 check_stack:
-	if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr))
+	/* Don't allow expansion below FIRST_USER_ADDRESS */
+	if (vma->vm_flags & VM_GROWSDOWN &&
+	    addr >= FIRST_USER_ADDRESS && !expand_stack(vma, addr))
 		goto good_area;
 out:
 	return fault;

trunk/arch/arm/mm/mmu.c

@@ -489,7 +489,8 @@ static void __init build_mem_type_table(void)
 	 */
 	for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
 		mem_types[i].prot_pte |= PTE_EXT_AF;
-		mem_types[i].prot_sect |= PMD_SECT_AF;
+		if (mem_types[i].prot_sect)
+			mem_types[i].prot_sect |= PMD_SECT_AF;
 	}
 	kern_pgprot |= PTE_EXT_AF;
 	vecs_pgprot |= PTE_EXT_AF;

trunk/arch/arm/vfp/vfpmodule.c

@@ -11,6 +11,7 @@
 #include <linux/types.h>
 #include <linux/cpu.h>
 #include <linux/cpu_pm.h>
+#include <linux/hardirq.h>
 #include <linux/kernel.h>
 #include <linux/notifier.h>
 #include <linux/signal.h>
@@ -432,7 +433,10 @@ void VFP_bounce(u32 trigger, u32 fpexc, struct pt_regs *regs)
 
 static void vfp_enable(void *unused)
 {
-	u32 access = get_copro_access();
+	u32 access;
+
+	BUG_ON(preemptible());
+	access = get_copro_access();
 
 	/*
 	 * Enable full access to VFP (cp10 and cp11)
@@ -573,12 +577,6 @@ int vfp_preserve_user_clear_hwstate(struct user_vfp __user *ufp,
 	 * entry.
 	 */
 	hwstate->fpscr &= ~(FPSCR_LENGTH_MASK | FPSCR_STRIDE_MASK);
-
-	/*
-	 * Disable VFP in the hwstate so that we can detect if it gets
-	 * used.
-	 */
-	hwstate->fpexc &= ~FPEXC_EN;
 	return 0;
 }
 
@@ -591,12 +589,8 @@ int vfp_restore_user_hwstate(struct user_vfp __user *ufp,
 	unsigned long fpexc;
 	int err = 0;
 
-	/*
-	 * If VFP has been used, then disable it to avoid corrupting
-	 * the new thread state.
-	 */
-	if (hwstate->fpexc & FPEXC_EN)
-		vfp_flush_hwstate(thread);
+	/* Disable VFP to avoid corrupting the new thread state. */
+	vfp_flush_hwstate(thread);
 
 	/*
 	 * Copy the floating point registers. There can be unused
@@ -657,7 +651,7 @@ static int __init vfp_init(void)
 	unsigned int cpu_arch = cpu_architecture();
 
 	if (cpu_arch >= CPU_ARCH_ARMv6)
-		vfp_enable(NULL);
+		on_each_cpu(vfp_enable, NULL, 1);
 
 	/*
 	 * First check that there is a VFP that we can use.
@@ -678,8 +672,6 @@ static int __init vfp_init(void)
 	} else {
 		hotcpu_notifier(vfp_hotplug, 0);
 
-		smp_call_function(vfp_enable, NULL, 1);
-
 		VFP_arch = (vfpsid & FPSID_ARCH_MASK) >> FPSID_ARCH_BIT;  /* Extract the architecture version */
 		printk("implementor %02x architecture %d part %02x variant %x rev %x\n",
 			(vfpsid & FPSID_IMPLEMENTER_MASK) >> FPSID_IMPLEMENTER_BIT,

trunk/arch/frv/include/asm/processor.h

@@ -135,10 +135,6 @@ unsigned long get_wchan(struct task_struct *p);
 #define	KSTK_EIP(tsk)	((tsk)->thread.frame0->pc)
 #define	KSTK_ESP(tsk)	((tsk)->thread.frame0->sp)
 
-/* Allocation and freeing of basic task resources. */
-extern struct task_struct *alloc_task_struct_node(int node);
-extern void free_task_struct(struct task_struct *p);
-
 #define cpu_relax()    barrier()
 
 /* data cache prefetch */

trunk/arch/mn10300/kernel/smp.c

@@ -24,6 +24,7 @@
 #include <linux/sched.h>
 #include <linux/profile.h>
 #include <linux/smp.h>
+#include <linux/cpu.h>
 #include <asm/tlbflush.h>
 #include <asm/bitops.h>
 #include <asm/processor.h>
@@ -38,7 +39,6 @@
 #include "internal.h"
 
 #ifdef CONFIG_HOTPLUG_CPU
-#include <linux/cpu.h>
 #include <asm/cacheflush.h>
 
 static unsigned long sleep_mode[NR_CPUS];
@@ -874,10 +874,13 @@ static void __init smp_online(void)
 
 	cpu = smp_processor_id();
 
-	local_irq_enable();
+	notify_cpu_starting(cpu);
 
+	ipi_call_lock();
 	set_cpu_online(cpu, true);
-	smp_wmb();
+	ipi_call_unlock();
+
+	local_irq_enable();
 }
 
 /**

trunk/arch/parisc/kernel/smp.c

@@ -31,6 +31,7 @@
 #include <linux/delay.h>
 #include <linux/bitops.h>
 #include <linux/ftrace.h>
+#include <linux/cpu.h>
 
 #include <linux/atomic.h>
 #include <asm/current.h>
@@ -295,8 +296,13 @@ smp_cpu_init(int cpunum)
 
 		printk(KERN_CRIT "CPU#%d already initialized!\n", cpunum);
 		machine_halt();
-	}  
+	}
+
+	notify_cpu_starting(cpunum);
+
+	ipi_call_lock();
 	set_cpu_online(cpunum, true);
+	ipi_call_unlock();
 
 	/* Initialise the idle task for this CPU */
 	atomic_inc(&init_mm.mm_count);

trunk/arch/powerpc/include/asm/kvm_book3s.h

@@ -81,12 +81,13 @@ struct kvmppc_vcpu_book3s {
 	u64 sdr1;
 	u64 hior;
 	u64 msr_mask;
-	u64 vsid_next;
 #ifdef CONFIG_PPC_BOOK3S_32
 	u32 vsid_pool[VSID_POOL_SIZE];
+	u32 vsid_next;
 #else
-	u64 vsid_first;
-	u64 vsid_max;
+	u64 proto_vsid_first;
+	u64 proto_vsid_max;
+	u64 proto_vsid_next;
 #endif
 	int context_id[SID_CONTEXTS];
 

trunk/arch/powerpc/kvm/book3s_64_mmu_host.c

@@ -194,14 +194,14 @@ static struct kvmppc_sid_map *create_sid_map(struct kvm_vcpu *vcpu, u64 gvsid)
 	backwards_map = !backwards_map;
 
 	/* Uh-oh ... out of mappings. Let's flush! */
-	if (vcpu_book3s->vsid_next == vcpu_book3s->vsid_max) {
-		vcpu_book3s->vsid_next = vcpu_book3s->vsid_first;
+	if (vcpu_book3s->proto_vsid_next == vcpu_book3s->proto_vsid_max) {
+		vcpu_book3s->proto_vsid_next = vcpu_book3s->proto_vsid_first;
 		memset(vcpu_book3s->sid_map, 0,
 		       sizeof(struct kvmppc_sid_map) * SID_MAP_NUM);
 		kvmppc_mmu_pte_flush(vcpu, 0, 0);
 		kvmppc_mmu_flush_segments(vcpu);
 	}
-	map->host_vsid = vcpu_book3s->vsid_next++;
+	map->host_vsid = vsid_scramble(vcpu_book3s->proto_vsid_next++, 256M);
 
 	map->guest_vsid = gvsid;
 	map->valid = true;
@@ -319,9 +319,10 @@ int kvmppc_mmu_init(struct kvm_vcpu *vcpu)
 		return -1;
 	vcpu3s->context_id[0] = err;
 
-	vcpu3s->vsid_max = ((vcpu3s->context_id[0] + 1) << USER_ESID_BITS) - 1;
-	vcpu3s->vsid_first = vcpu3s->context_id[0] << USER_ESID_BITS;
-	vcpu3s->vsid_next = vcpu3s->vsid_first;
+	vcpu3s->proto_vsid_max = ((vcpu3s->context_id[0] + 1)
+				  << USER_ESID_BITS) - 1;
+	vcpu3s->proto_vsid_first = vcpu3s->context_id[0] << USER_ESID_BITS;
+	vcpu3s->proto_vsid_next = vcpu3s->proto_vsid_first;
 
 	kvmppc_mmu_hpte_init(vcpu);
 

trunk/arch/powerpc/kvm/book3s_hv_rm_mmu.c

@@ -463,6 +463,7 @@ long kvmppc_h_bulk_remove(struct kvm_vcpu *vcpu)
 				/* insert R and C bits from PTE */
 				rcbits = rev->guest_rpte & (HPTE_R_R|HPTE_R_C);
 				args[j] |= rcbits << (56 - 5);
+				hp[0] = 0;
 				continue;
 			}
 

trunk/arch/powerpc/kvm/book3s_segment.S

@@ -197,7 +197,8 @@ kvmppc_interrupt:
 	/* Save guest PC and MSR */
 #ifdef CONFIG_PPC64
 BEGIN_FTR_SECTION
-	andi.	r0,r12,0x2
+	andi.	r0, r12, 0x2
+	cmpwi	cr1, r0, 0
 	beq	1f
 	mfspr	r3,SPRN_HSRR0
 	mfspr	r4,SPRN_HSRR1
@@ -250,6 +251,12 @@ END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
 	beq	ld_last_prev_inst
 	cmpwi	r12, BOOK3S_INTERRUPT_ALIGNMENT
 	beq-	ld_last_inst
+#ifdef CONFIG_PPC64
+BEGIN_FTR_SECTION
+	cmpwi	r12, BOOK3S_INTERRUPT_H_EMUL_ASSIST
+	beq-	ld_last_inst
+END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
+#endif
 
 	b	no_ld_last_inst
 
@@ -316,23 +323,17 @@ no_dcbz32_off:
 	 * Having set up SRR0/1 with the address where we want
 	 * to continue with relocation on (potentially in module
 	 * space), we either just go straight there with rfi[d],
-	 * or we jump to an interrupt handler with bctr if there
-	 * is an interrupt to be handled first.  In the latter
-	 * case, the rfi[d] at the end of the interrupt handler
-	 * will get us back to where we want to continue.
+	 * or we jump to an interrupt handler if there is an
+	 * interrupt to be handled first.  In the latter case,
+	 * the rfi[d] at the end of the interrupt handler will
+	 * get us back to where we want to continue.
 	 */
 
-	cmpwi	r12, BOOK3S_INTERRUPT_EXTERNAL
-	beq	1f
-	cmpwi	r12, BOOK3S_INTERRUPT_DECREMENTER
-	beq	1f
-	cmpwi	r12, BOOK3S_INTERRUPT_PERFMON
-1:	mtctr	r12
-
 	/* Register usage at this point:
 	 *
 	 * R1       = host R1
 	 * R2       = host R2
+	 * R10      = raw exit handler id
 	 * R12      = exit handler id
 	 * R13      = shadow vcpu (32-bit) or PACA (64-bit)
 	 * SVCPU.*  = guest *
@@ -342,12 +343,25 @@ no_dcbz32_off:
 	PPC_LL	r6, HSTATE_HOST_MSR(r13)
 	PPC_LL	r8, HSTATE_VMHANDLER(r13)
 
-	/* Restore host msr -> SRR1 */
+#ifdef CONFIG_PPC64
+BEGIN_FTR_SECTION
+	beq	cr1, 1f
+	mtspr	SPRN_HSRR1, r6
+	mtspr	SPRN_HSRR0, r8
+END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
+#endif
+1:	/* Restore host msr -> SRR1 */
 	mtsrr1	r6
 	/* Load highmem handler address */
 	mtsrr0	r8
 
 	/* RFI into the highmem handler, or jump to interrupt handler */
-	beqctr
+	cmpwi	r12, BOOK3S_INTERRUPT_EXTERNAL
+	beqa	BOOK3S_INTERRUPT_EXTERNAL
+	cmpwi	r12, BOOK3S_INTERRUPT_DECREMENTER
+	beqa	BOOK3S_INTERRUPT_DECREMENTER
+	cmpwi	r12, BOOK3S_INTERRUPT_PERFMON
+	beqa	BOOK3S_INTERRUPT_PERFMON
+
 	RFI
 kvmppc_handler_trampoline_exit_end:

trunk/arch/tile/Kconfig

@@ -11,6 +11,7 @@ config TILE
 	select GENERIC_IRQ_PROBE
 	select GENERIC_PENDING_IRQ if SMP
 	select GENERIC_IRQ_SHOW
+	select HAVE_SYSCALL_WRAPPERS if TILEGX
 	select SYS_HYPERVISOR
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 

trunk/arch/tile/include/asm/thread_info.h

@@ -100,9 +100,14 @@ extern void cpu_idle_on_new_stack(struct thread_info *old_ti,
 
 #else /* __ASSEMBLY__ */
 
-/* how to get the thread information struct from ASM */
+/*
+ * How to get the thread information struct from assembly.
+ * Note that we use different macros since different architectures
+ * have different semantics in their "mm" instruction and we would
+ * like to guarantee that the macro expands to exactly one instruction.
+ */
 #ifdef __tilegx__
-#define GET_THREAD_INFO(reg) move reg, sp; mm reg, zero, LOG2_THREAD_SIZE, 63
+#define EXTRACT_THREAD_INFO(reg) mm reg, zero, LOG2_THREAD_SIZE, 63
 #else
 #define GET_THREAD_INFO(reg) mm reg, sp, zero, LOG2_THREAD_SIZE, 31
 #endif

trunk/arch/tile/kernel/compat_signal.c

@@ -403,19 +403,17 @@ int compat_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	 * Set up registers for signal handler.
 	 * Registers that we don't modify keep the value they had from
 	 * user-space at the time we took the signal.
+	 * We always pass siginfo and mcontext, regardless of SA_SIGINFO,
+	 * since some things rely on this (e.g. glibc's debug/segfault.c).
 	 */
 	regs->pc = ptr_to_compat_reg(ka->sa.sa_handler);
 	regs->ex1 = PL_ICS_EX1(USER_PL, 1); /* set crit sec in handler */
 	regs->sp = ptr_to_compat_reg(frame);
 	regs->lr = restorer;
 	regs->regs[0] = (unsigned long) usig;
-
-	if (ka->sa.sa_flags & SA_SIGINFO) {
-		/* Need extra arguments, so mark to restore caller-saves. */
-		regs->regs[1] = ptr_to_compat_reg(&frame->info);
-		regs->regs[2] = ptr_to_compat_reg(&frame->uc);
-		regs->flags |= PT_FLAGS_CALLER_SAVES;
-	}
+	regs->regs[1] = ptr_to_compat_reg(&frame->info);
+	regs->regs[2] = ptr_to_compat_reg(&frame->uc);
+	regs->flags |= PT_FLAGS_CALLER_SAVES;
 
 	/*
 	 * Notify any tracer that was single-stepping it.