---

yaml
---
r: 374007
b: refs/heads/master
c: 56fecc7
h: refs/heads/master
i:
  374005: b1da393
  374003: 137bc3f
  373999: 57b115e
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 535409d9b37292257e22654e7b5246b913e51985
+refs/heads/master: 56fecc7de9cfeb804d8ff51c481154bf3f6ccb6a

trunk/arch/arm/mach-omap1/Kconfig

@@ -55,12 +55,6 @@ config MACH_OMAP_H3
 	  TI OMAP 1710 H3 board support. Say Y here if you have such
 	  a board.
 
-config MACH_OMAP_HTCWIZARD
-	bool "HTC Wizard"
-	depends on ARCH_OMAP850
-	help
-	  HTC Wizard smartphone support (AKA QTEK 9100, ...)
-
 config MACH_HERALD
 	bool "HTC Herald"
 	depends on ARCH_OMAP850

trunk/arch/arm/mach-omap2/Kconfig

@@ -408,7 +408,7 @@ config OMAP3_SDRC_AC_TIMING
 
 config OMAP4_ERRATA_I688
 	bool "OMAP4 errata: Async Bridge Corruption"
-	depends on ARCH_OMAP4 && !ARCH_MULTIPLATFORM
+	depends on (ARCH_OMAP4 || SOC_OMAP5) && !ARCH_MULTIPLATFORM
 	select ARCH_HAS_BARRIERS
 	help
 	  If a data is stalled inside asynchronous bridge because of back

trunk/arch/arm/mach-omap2/board-2430sdp.c

@@ -166,7 +166,7 @@ static void __init sdp2430_display_init(void)
 	omap_display_init(&sdp2430_dss_data);
 }
 
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 
 static struct omap_smc91x_platform_data board_smc91x_data = {
 	.cs		= 5,

trunk/arch/arm/mach-omap2/board-h4.c

@@ -246,7 +246,7 @@ static u32 is_gpmc_muxed(void)
 		return 0;
 }
 
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
+#if IS_ENABLED(CONFIG_SMC91X)
 
 static struct omap_smc91x_platform_data board_smc91x_data = {
 	.cs		= 1,

trunk/arch/arm/mach-omap2/cclock33xx_data.c

@@ -958,6 +958,14 @@ int __init am33xx_clk_init(void)
 
 	clk_set_parent(&timer3_fck, &sys_clkin_ck);
 	clk_set_parent(&timer6_fck, &sys_clkin_ck);
+	/*
+	 * The On-Chip 32K RC Osc clock is not an accurate clock-source as per
+	 * the design/spec, so as a result, for example, timer which supposed
+	 * to get expired @60Sec, but will expire somewhere ~@40Sec, which is
+	 * not expected by any use-case, so change WDT1 clock source to PRCM
+	 * 32KHz clock.
+	 */
+	clk_set_parent(&wdt1_fck, &clkdiv32k_ick);
 
 	return 0;
 }

trunk/arch/arm/mach-omap2/dpll3xxx.c

@@ -307,10 +307,10 @@ static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel)
 	_omap3_noncore_dpll_bypass(clk);
 
 	/*
-	 * Set jitter correction. No jitter correction for OMAP4 and 3630
-	 * since freqsel field is no longer present
+	 * Set jitter correction. Jitter correction applicable for OMAP343X
+	 * only since freqsel field is no longer present on other devices.
 	 */
-	if (!soc_is_am33xx() && !cpu_is_omap44xx() && !cpu_is_omap3630()) {
+	if (cpu_is_omap343x()) {
 		v = __raw_readl(dd->control_reg);
 		v &= ~dd->freqsel_mask;
 		v |= freqsel << __ffs(dd->freqsel_mask);
@@ -480,29 +480,30 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (!dd)
 		return -EINVAL;
 
-	__clk_prepare(dd->clk_bypass);
-	clk_enable(dd->clk_bypass);
-	__clk_prepare(dd->clk_ref);
-	clk_enable(dd->clk_ref);
-
 	if (__clk_get_rate(dd->clk_bypass) == rate &&
 	    (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
 		pr_debug("%s: %s: set rate: entering bypass.\n",
 			 __func__, __clk_get_name(hw->clk));
 
+		__clk_prepare(dd->clk_bypass);
+		clk_enable(dd->clk_bypass);
 		ret = _omap3_noncore_dpll_bypass(clk);
 		if (!ret)
 			new_parent = dd->clk_bypass;
+		clk_disable(dd->clk_bypass);
+		__clk_unprepare(dd->clk_bypass);
 	} else {
+		__clk_prepare(dd->clk_ref);
+		clk_enable(dd->clk_ref);
+
 		if (dd->last_rounded_rate != rate)
 			rate = __clk_round_rate(hw->clk, rate);
 
 		if (dd->last_rounded_rate == 0)
 			return -EINVAL;
 
-		/* No freqsel on AM335x, OMAP4 and OMAP3630 */
-		if (!soc_is_am33xx() && !cpu_is_omap44xx() &&
-		    !cpu_is_omap3630()) {
+		/* Freqsel is available only on OMAP343X devices */
+		if (cpu_is_omap343x()) {
 			freqsel = _omap3_dpll_compute_freqsel(clk,
 						dd->last_rounded_n);
 			WARN_ON(!freqsel);
@@ -514,6 +515,8 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
 		ret = omap3_noncore_dpll_program(clk, freqsel);
 		if (!ret)
 			new_parent = dd->clk_ref;
+		clk_disable(dd->clk_ref);
+		__clk_unprepare(dd->clk_ref);
 	}
 	/*
 	* FIXME - this is all wrong.  common code handles reparenting and
@@ -525,11 +528,6 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (!ret)
 		__clk_reparent(hw->clk, new_parent);
 
-	clk_disable(dd->clk_ref);
-	__clk_unprepare(dd->clk_ref);
-	clk_disable(dd->clk_bypass);
-	__clk_unprepare(dd->clk_bypass);
-
 	return 0;
 }
 

trunk/arch/arm/mach-omap2/dsp.c

@@ -26,7 +26,7 @@
 #include "control.h"
 #include "cm2xxx_3xxx.h"
 #include "prm2xxx_3xxx.h"
-#ifdef CONFIG_BRIDGE_DVFS
+#ifdef CONFIG_TIDSPBRIDGE_DVFS
 #include "omap-pm.h"
 #endif
 
@@ -35,7 +35,7 @@
 static struct platform_device *omap_dsp_pdev;
 
 static struct omap_dsp_platform_data omap_dsp_pdata __initdata = {
-#ifdef CONFIG_BRIDGE_DVFS
+#ifdef CONFIG_TIDSPBRIDGE_DVFS
 	.dsp_set_min_opp = omap_pm_dsp_set_min_opp,
 	.dsp_get_opp = omap_pm_dsp_get_opp,
 	.cpu_set_freq = omap_pm_cpu_set_freq,

trunk/arch/arm/mach-omap2/id.c

@@ -529,22 +529,28 @@ void __init omap5xxx_check_revision(void)
 	case 0xb942:
 		switch (rev) {
 		case 0:
-		default:
 			omap_revision = OMAP5430_REV_ES1_0;
+			break;
+		case 1:
+		default:
+			omap_revision = OMAP5430_REV_ES2_0;
 		}
 		break;
 
 	case 0xb998:
 		switch (rev) {
 		case 0:
-		default:
 			omap_revision = OMAP5432_REV_ES1_0;
+			break;
+		case 1:
+		default:
+			omap_revision = OMAP5432_REV_ES2_0;
 		}
 		break;
 
 	default:
 		/* Unknown default to latest silicon rev as default*/
-		omap_revision = OMAP5430_REV_ES1_0;
+		omap_revision = OMAP5430_REV_ES2_0;
 	}
 
 	pr_info("OMAP%04x ES%d.0\n",

trunk/arch/arm/mach-omap2/io.c

@@ -271,6 +271,14 @@ static struct map_desc omap54xx_io_desc[] __initdata = {
 		.length		= L4_PER_54XX_SIZE,
 		.type		= MT_DEVICE,
 	},
+#ifdef CONFIG_OMAP4_ERRATA_I688
+	{
+		.virtual	= OMAP4_SRAM_VA,
+		.pfn		= __phys_to_pfn(OMAP4_SRAM_PA),
+		.length		= PAGE_SIZE,
+		.type		= MT_MEMORY_SO,
+	},
+#endif
 };
 #endif
 
@@ -323,6 +331,7 @@ void __init omap4_map_io(void)
 void __init omap5_map_io(void)
 {
 	iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc));
+	omap_barriers_init();
 }
 #endif
 /*

trunk/arch/arm/mach-omap2/omap4-common.c

@@ -240,15 +240,21 @@ void __iomem *omap4_get_sar_ram_base(void)
  */
 static int __init omap4_sar_ram_init(void)
 {
+	unsigned long sar_base;
+
 	/*
 	 * To avoid code running on other OMAPs in
 	 * multi-omap builds
 	 */
-	if (!cpu_is_omap44xx())
+	if (cpu_is_omap44xx())
+		sar_base = OMAP44XX_SAR_RAM_BASE;
+	else if (soc_is_omap54xx())
+		sar_base = OMAP54XX_SAR_RAM_BASE;
+	else
 		return -ENOMEM;
 
 	/* Static mapping, never released */
-	sar_ram_base = ioremap(OMAP44XX_SAR_RAM_BASE, SZ_16K);
+	sar_ram_base = ioremap(sar_base, SZ_16K);
 	if (WARN_ON(!sar_ram_base))
 		return -ENOMEM;
 

trunk/arch/arm/mach-omap2/omap4-sar-layout.h

@@ -48,13 +48,13 @@
 #define SAR_BACKUP_STATUS_WAKEUPGEN		0x10
 
 /* WakeUpGen save restore offset from OMAP54XX_SAR_RAM_BASE */
-#define OMAP5_WAKEUPGENENB_OFFSET_CPU0		(SAR_BANK3_OFFSET + 0x8d4)
-#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0	(SAR_BANK3_OFFSET + 0x8e8)
-#define OMAP5_WAKEUPGENENB_OFFSET_CPU1		(SAR_BANK3_OFFSET + 0x8fc)
-#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1	(SAR_BANK3_OFFSET + 0x910)
-#define OMAP5_AUXCOREBOOT0_OFFSET		(SAR_BANK3_OFFSET + 0x924)
-#define OMAP5_AUXCOREBOOT1_OFFSET		(SAR_BANK3_OFFSET + 0x928)
-#define OMAP5_AMBA_IF_MODE_OFFSET		(SAR_BANK3_OFFSET + 0x92c)
+#define OMAP5_WAKEUPGENENB_OFFSET_CPU0		(SAR_BANK3_OFFSET + 0x9dc)
+#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0	(SAR_BANK3_OFFSET + 0x9f0)
+#define OMAP5_WAKEUPGENENB_OFFSET_CPU1		(SAR_BANK3_OFFSET + 0xa04)
+#define OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1	(SAR_BANK3_OFFSET + 0xa18)
+#define OMAP5_AUXCOREBOOT0_OFFSET		(SAR_BANK3_OFFSET + 0xa2c)
+#define OMAP5_AUXCOREBOOT1_OFFSET		(SAR_BANK3_OFFSET + 0x930)
+#define OMAP5_AMBA_IF_MODE_OFFSET		(SAR_BANK3_OFFSET + 0xa34)
 #define OMAP5_SAR_BACKUP_STATUS_OFFSET		(SAR_BANK3_OFFSET + 0x800)
 
 #endif

trunk/arch/arm/mach-omap2/omap54xx.h

@@ -28,5 +28,6 @@
 #define OMAP54XX_PRCM_MPU_BASE		0x48243000
 #define OMAP54XX_SCM_BASE		0x4a002000
 #define OMAP54XX_CTRL_BASE		0x4a002800
+#define OMAP54XX_SAR_RAM_BASE		0x4ae26000
 
 #endif /* __ASM_SOC_OMAP555554XX_H */

trunk/arch/arm/mach-omap2/omap_hwmod.c

@@ -610,8 +610,6 @@ static int _enable_wakeup(struct omap_hwmod *oh, u32 *v)
 
 	/* XXX test pwrdm_get_wken for this hwmod's subsystem */
 
-	oh->_int_flags |= _HWMOD_WAKEUP_ENABLED;
-
 	return 0;
 }
 
@@ -645,8 +643,6 @@ static int _disable_wakeup(struct omap_hwmod *oh, u32 *v)
 
 	/* XXX test pwrdm_get_wken for this hwmod's subsystem */
 
-	oh->_int_flags &= ~_HWMOD_WAKEUP_ENABLED;
-
 	return 0;
 }
 

trunk/arch/arm/mach-omap2/omap_hwmod.h

@@ -477,15 +477,13 @@ struct omap_hwmod_omap4_prcm {
  * These are for internal use only and are managed by the omap_hwmod code.
  *
  * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module
- * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP
  * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached
  * _HWMOD_SKIP_ENABLE: set if hwmod enabled during init (HWMOD_INIT_NO_IDLE) -
  *     causes the first call to _enable() to only update the pinmux
  */
 #define _HWMOD_NO_MPU_PORT			(1 << 0)
-#define _HWMOD_WAKEUP_ENABLED			(1 << 1)
-#define _HWMOD_SYSCONFIG_LOADED			(1 << 2)
-#define _HWMOD_SKIP_ENABLE			(1 << 3)
+#define _HWMOD_SYSCONFIG_LOADED			(1 << 1)
+#define _HWMOD_SKIP_ENABLE			(1 << 2)
 
 /*
  * omap_hwmod._state definitions

trunk/arch/arm/mach-omap2/omap_hwmod_33xx_data.c

@@ -28,6 +28,7 @@
 #include "prm-regbits-33xx.h"
 #include "i2c.h"
 #include "mmc.h"
+#include "wd_timer.h"
 
 /*
  * IP blocks
@@ -2087,8 +2088,21 @@ static struct omap_hwmod am33xx_uart6_hwmod = {
 };
 
 /* 'wd_timer' class */
+static struct omap_hwmod_class_sysconfig wdt_sysc = {
+	.rev_offs	= 0x0,
+	.sysc_offs	= 0x10,
+	.syss_offs	= 0x14,
+	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE |
+			SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
 static struct omap_hwmod_class am33xx_wd_timer_hwmod_class = {
 	.name		= "wd_timer",
+	.sysc		= &wdt_sysc,
+	.pre_shutdown	= &omap2_wd_timer_disable,
 };
 
 /*
@@ -2099,6 +2113,7 @@ static struct omap_hwmod am33xx_wd_timer1_hwmod = {
 	.name		= "wd_timer2",
 	.class		= &am33xx_wd_timer_hwmod_class,
 	.clkdm_name	= "l4_wkup_clkdm",
+	.flags		= HWMOD_SWSUP_SIDLE,
 	.main_clk	= "wdt1_fck",
 	.prcm		= {
 		.omap4	= {

trunk/arch/arm/mach-omap2/powerdomain.c

@@ -52,7 +52,6 @@ enum {
 #define ALREADYACTIVE_SWITCH		0
 #define FORCEWAKEUP_SWITCH		1
 #define LOWPOWERSTATE_SWITCH		2
-#define ERROR_SWITCH			3
 
 /* pwrdm_list contains all registered struct powerdomains */
 static LIST_HEAD(pwrdm_list);
@@ -233,10 +232,7 @@ static u8 _pwrdm_save_clkdm_state_and_activate(struct powerdomain *pwrdm,
 {
 	u8 sleep_switch;
 
-	if (curr_pwrst < 0) {
-		WARN_ON(1);
-		sleep_switch = ERROR_SWITCH;
-	} else if (curr_pwrst < PWRDM_POWER_ON) {
+	if (curr_pwrst < PWRDM_POWER_ON) {
 		if (curr_pwrst > pwrst &&
 		    pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE &&
 		    arch_pwrdm->pwrdm_set_lowpwrstchange) {
@@ -1091,7 +1087,8 @@ int pwrdm_post_transition(struct powerdomain *pwrdm)
  */
 int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst)
 {
-	u8 curr_pwrst, next_pwrst, sleep_switch;
+	u8 next_pwrst, sleep_switch;
+	int curr_pwrst;
 	int ret = 0;
 	bool hwsup = false;
 
@@ -1107,16 +1104,17 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst)
 	pwrdm_lock(pwrdm);
 
 	curr_pwrst = pwrdm_read_pwrst(pwrdm);
+	if (curr_pwrst < 0) {
+		ret = -EINVAL;
+		goto osps_out;
+	}
+
 	next_pwrst = pwrdm_read_next_pwrst(pwrdm);
 	if (curr_pwrst == pwrst && next_pwrst == pwrst)
 		goto osps_out;
 
 	sleep_switch = _pwrdm_save_clkdm_state_and_activate(pwrdm, curr_pwrst,
 							    pwrst, &hwsup);
-	if (sleep_switch == ERROR_SWITCH) {
-		ret = -EINVAL;
-		goto osps_out;
-	}
 
 	ret = pwrdm_set_next_pwrst(pwrdm, pwrst);
 	if (ret)