Merge branch 'trivial-2.6.23' of git://git.kernel.dk/data/git/linux-2…

….6-block

* 'trivial-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-block:
  Documentation/block/barrier.txt is not in sync with the actual code: - blk_queue_ordered() no longer has a gfp_mask parameter - blk_queue_ordered_locked() no longer exists - sd_prepare_flush() looks slightly different
  Use list_for_each_entry() instead of list_for_each() in the block device
  Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu",
  block/Kconfig already has its own "menuconfig" so remove these
  Use menuconfigs instead of menus, so the whole menu can be disabled at once
  cfq-iosched: fix async queue behaviour
  unexport bio_{,un}map_user
  Remove legacy CDROM drivers
  [PATCH] fix request->cmd == INT cases
  cciss: add new controller support for P700m
  [PATCH] Remove acsi.c
  [BLOCK] drop unnecessary bvec rewinding from flush_dry_bio_endio
  [PATCH] cdrom_sysctl_info fix
  blk_hw_contig_segment(): bad segment size checks
  [TRIVIAL PATCH] Kill blk_congestion_wait() stub for !CONFIG_BLOCK

Documentation/block/barrier.txt

@@ -82,33 +82,23 @@ including draining and flushing.
 typedef void (prepare_flush_fn)(request_queue_t *q, struct request *rq);
 
 int blk_queue_ordered(request_queue_t *q, unsigned ordered,
-		      prepare_flush_fn *prepare_flush_fn,
-		      unsigned gfp_mask);
-
-int blk_queue_ordered_locked(request_queue_t *q, unsigned ordered,
-			     prepare_flush_fn *prepare_flush_fn,
-			     unsigned gfp_mask);
-
-The only difference between the two functions is whether or not the
-caller is holding q->queue_lock on entry.  The latter expects the
-caller is holding the lock.
+		      prepare_flush_fn *prepare_flush_fn);
 
 @q			: the queue in question
 @ordered		: the ordered mode the driver/device supports
 @prepare_flush_fn	: this function should prepare @rq such that it
 			  flushes cache to physical medium when executed
-@gfp_mask		: gfp_mask used when allocating data structures
-			  for ordered processing
 
 For example, SCSI disk driver's prepare_flush_fn looks like the
 following.
 
 static void sd_prepare_flush(request_queue_t *q, struct request *rq)
 {
 	memset(rq->cmd, 0, sizeof(rq->cmd));
-	rq->flags |= REQ_BLOCK_PC;
+	rq->cmd_type = REQ_TYPE_BLOCK_PC;
 	rq->timeout = SD_TIMEOUT;
 	rq->cmd[0] = SYNCHRONIZE_CACHE;
+	rq->cmd_len = 10;
 }
 
 The following seven ordered modes are supported.  The following table

block/Kconfig

@@ -1,7 +1,7 @@
 #
 # Block layer core configuration
 #
-config BLOCK
+menuconfig BLOCK
        bool "Enable the block layer" if EMBEDDED
        default y
        help
@@ -49,6 +49,6 @@ config LSF
 
 	  If unsure, say Y.
 
-endif
+endif # BLOCK
 
 source block/Kconfig.iosched

block/cfq-iosched.c

@@ -92,6 +92,8 @@ struct cfq_data {
 	struct cfq_queue *active_queue;
 	struct cfq_io_context *active_cic;
 
+	struct cfq_queue *async_cfqq[IOPRIO_BE_NR];
+
 	struct timer_list idle_class_timer;
 
 	sector_t last_position;
@@ -1351,8 +1353,8 @@ static void cfq_ioc_set_ioprio(struct io_context *ioc)
 }
 
 static struct cfq_queue *
-cfq_get_queue(struct cfq_data *cfqd, int is_sync, struct task_struct *tsk,
-	      gfp_t gfp_mask)
+cfq_find_alloc_queue(struct cfq_data *cfqd, int is_sync,
+		     struct task_struct *tsk, gfp_t gfp_mask)
 {
 	struct cfq_queue *cfqq, *new_cfqq = NULL;
 	struct cfq_io_context *cic;
@@ -1405,12 +1407,35 @@ cfq_get_queue(struct cfq_data *cfqd, int is_sync, struct task_struct *tsk,
 	if (new_cfqq)
 		kmem_cache_free(cfq_pool, new_cfqq);
 
-	atomic_inc(&cfqq->ref);
 out:
 	WARN_ON((gfp_mask & __GFP_WAIT) && !cfqq);
 	return cfqq;
 }
 
+static struct cfq_queue *
+cfq_get_queue(struct cfq_data *cfqd, int is_sync, struct task_struct *tsk,
+	      gfp_t gfp_mask)
+{
+	const int ioprio = task_ioprio(tsk);
+	struct cfq_queue *cfqq = NULL;
+
+	if (!is_sync)
+		cfqq = cfqd->async_cfqq[ioprio];
+	if (!cfqq)
+		cfqq = cfq_find_alloc_queue(cfqd, is_sync, tsk, gfp_mask);
+
+	/*
+	 * pin the queue now that it's allocated, scheduler exit will prune it
+	 */
+	if (!is_sync && !cfqd->async_cfqq[ioprio]) {
+		atomic_inc(&cfqq->ref);
+		cfqd->async_cfqq[ioprio] = cfqq;
+	}
+
+	atomic_inc(&cfqq->ref);
+	return cfqq;
+}
+
 /*
  * We drop cfq io contexts lazily, so we may find a dead one.
  */
@@ -2019,6 +2044,7 @@ static void cfq_exit_queue(elevator_t *e)
 {
 	struct cfq_data *cfqd = e->elevator_data;
 	request_queue_t *q = cfqd->queue;
+	int i;
 
 	cfq_shutdown_timer_wq(cfqd);
 
@@ -2035,6 +2061,13 @@ static void cfq_exit_queue(elevator_t *e)
 		__cfq_exit_single_io_context(cfqd, cic);
 	}
 
+	/*
+	 * Put the async queues
+	 */
+	for (i = 0; i < IOPRIO_BE_NR; i++)
+		if (cfqd->async_cfqq[i])	
+			cfq_put_queue(cfqd->async_cfqq[i]);
+
 	spin_unlock_irq(q->queue_lock);
 
 	cfq_shutdown_timer_wq(cfqd);

block/elevator.c

@@ -112,12 +112,8 @@ static inline int elv_try_merge(struct request *__rq, struct bio *bio)
 static struct elevator_type *elevator_find(const char *name)
 {
 	struct elevator_type *e;
-	struct list_head *entry;
-
-	list_for_each(entry, &elv_list) {
-
-		e = list_entry(entry, struct elevator_type, list);
 
+	list_for_each_entry(e, &elv_list, list) {
 		if (!strcmp(e->elevator_name, name))
 			return e;
 	}
@@ -1116,14 +1112,11 @@ ssize_t elv_iosched_show(request_queue_t *q, char *name)
 {
 	elevator_t *e = q->elevator;
 	struct elevator_type *elv = e->elevator_type;
-	struct list_head *entry;
+	struct elevator_type *__e;
 	int len = 0;
 
 	spin_lock(&elv_list_lock);
-	list_for_each(entry, &elv_list) {
-		struct elevator_type *__e;
-
-		__e = list_entry(entry, struct elevator_type, list);
+	list_for_each_entry(__e, &elv_list, list) {
 		if (!strcmp(elv->elevator_name, __e->elevator_name))
 			len += sprintf(name+len, "[%s] ", elv->elevator_name);
 		else

block/ll_rw_blk.c

@@ -527,8 +527,6 @@ int blk_do_ordered(request_queue_t *q, struct request **rqp)
 static int flush_dry_bio_endio(struct bio *bio, unsigned int bytes, int error)
 {
 	request_queue_t *q = bio->bi_private;
-	struct bio_vec *bvec;
-	int i;
 
 	/*
 	 * This is dry run, restore bio_sector and size.  We'll finish
@@ -540,13 +538,6 @@ static int flush_dry_bio_endio(struct bio *bio, unsigned int bytes, int error)
 	if (bio->bi_size)
 		return 1;
 
-	/* Rewind bvec's */
-	bio->bi_idx = 0;
-	bio_for_each_segment(bvec, bio, i) {
-		bvec->bv_len += bvec->bv_offset;
-		bvec->bv_offset = 0;
-	}
-
 	/* Reset bio */
 	set_bit(BIO_UPTODATE, &bio->bi_flags);
 	bio->bi_size = q->bi_size;
@@ -1304,9 +1295,9 @@ static int blk_hw_contig_segment(request_queue_t *q, struct bio *bio,
 	if (unlikely(!bio_flagged(nxt, BIO_SEG_VALID)))
 		blk_recount_segments(q, nxt);
 	if (!BIOVEC_VIRT_MERGEABLE(__BVEC_END(bio), __BVEC_START(nxt)) ||
-	    BIOVEC_VIRT_OVERSIZE(bio->bi_hw_front_size + bio->bi_hw_back_size))
+	    BIOVEC_VIRT_OVERSIZE(bio->bi_hw_back_size + nxt->bi_hw_front_size))
 		return 0;
-	if (bio->bi_size + nxt->bi_size > q->max_segment_size)
+	if (bio->bi_hw_back_size + nxt->bi_hw_front_size > q->max_segment_size)
 		return 0;
 
 	return 1;

drivers/Kconfig

@@ -24,8 +24,6 @@ source "drivers/scsi/Kconfig"
 
 source "drivers/ata/Kconfig"
 
-source "drivers/cdrom/Kconfig"
-
 source "drivers/md/Kconfig"
 
 source "drivers/message/fusion/Kconfig"

drivers/acorn/block/fd1772.c

@@ -1246,7 +1246,7 @@ static void redo_fd_request(void)
 	del_timer(&motor_off_timer);
 
 	ReqCnt = 0;
-	ReqCmd = CURRENT->cmd;
+	ReqCmd = rq_data_dir(CURRENT);
 	ReqBlock = CURRENT->sector;
 	ReqBuffer = CURRENT->buffer;
 	setup_req_params(drive);

drivers/acorn/block/mfmhd.c

@@ -439,7 +439,7 @@ static void mfm_rw_intr(void)
 	   a choice of command end or some data which is ready to be collected */
 	/* I think we have to transfer data while the interrupt line is on and its
 	   not any other type of interrupt */
-	if (CURRENT->cmd == WRITE) {
+	if (rq_data_dir(CURRENT) == WRITE) {
 		extern void hdc63463_writedma(void);
 		if ((hdc63463_dataleft <= 0) && (!(mfm_status & STAT_CED))) {
 			printk("mfm_rw_intr: Apparent DMA write request when no more to DMA\n");
@@ -799,7 +799,7 @@ static void issue_request(unsigned int block, unsigned int nsect,
 	raw_cmd.head = start_head;
 	raw_cmd.cylinder = track / p->heads;
 	raw_cmd.cmdtype = CURRENT->cmd;
-	raw_cmd.cmdcode = CURRENT->cmd == WRITE ? CMD_WD : CMD_RD;
+	raw_cmd.cmdcode = rq_data_dir(CURRENT) == WRITE ? CMD_WD : CMD_RD;
 	raw_cmd.cmddata[0] = dev + 1;	/* DAG: +1 to get US */
 	raw_cmd.cmddata[1] = raw_cmd.head;
 	raw_cmd.cmddata[2] = raw_cmd.cylinder >> 8;
@@ -830,7 +830,7 @@ static void issue_request(unsigned int block, unsigned int nsect,
 	hdc63463_dataleft = nsect * 256;	/* Better way? */
 
 	DBG("mfm%c: %sing: CHS=%d/%d/%d, sectors=%d, buffer=0x%08lx (%p)\n",
-	     raw_cmd.dev + 'a', (CURRENT->cmd == READ) ? "read" : "writ",
+	     raw_cmd.dev + 'a', rq_data_dir(CURRENT) == READ ? "read" : "writ",
 		       raw_cmd.cylinder,
 		       raw_cmd.head,
 	    raw_cmd.sector, nsect, (unsigned long) Copy_buffer, CURRENT);
@@ -917,13 +917,6 @@ static void mfm_request(void)
 
 		DBG("mfm_request: block after offset=%d\n", block);
 
-		if (CURRENT->cmd != READ && CURRENT->cmd != WRITE) {
-			printk("unknown mfm-command %d\n", CURRENT->cmd);
-			end_request(CURRENT, 0);
-			Busy = 0;
-			printk("mfm: continue 4\n");
-			continue;
-		}
 		issue_request(block, nsect, CURRENT);
 
 		break;

drivers/block/Kconfig

@@ -2,9 +2,12 @@
 # Block device driver configuration
 #
 
-if BLOCK
+menuconfig BLK_DEV
+	bool "Block devices"
+	depends on BLOCK
+	default y
 
-menu "Block devices"
+if BLK_DEV
 
 config BLK_DEV_FD
 	tristate "Normal floppy disk support"
@@ -56,40 +59,9 @@ config AMIGA_Z2RAM
 	  To compile this driver as a module, choose M here: the
 	  module will be called z2ram.
 
-config ATARI_ACSI
-	tristate "Atari ACSI support"
-	depends on ATARI && BROKEN
-	---help---
-	  This enables support for the Atari ACSI interface. The driver
-	  supports hard disks and CD-ROMs, which have 512-byte sectors, or can
-	  be switched to that mode. Due to the ACSI command format, only disks
-	  up to 1 GB are supported. Special support for certain ACSI to SCSI
-	  adapters, which could relax that, isn't included yet. The ACSI
-	  driver is also the basis for certain other drivers for devices
-	  attached to the ACSI bus: Atari SLM laser printer, BioNet-100
-	  Ethernet, and PAMsNet Ethernet. If you want to use one of these
-	  devices, you need ACSI support, too.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called acsi.
-
-comment "Some devices (e.g. CD jukebox) support multiple LUNs"
-	depends on ATARI && ATARI_ACSI
-
-config ACSI_MULTI_LUN
-	bool "Probe all LUNs on each ACSI device"
-	depends on ATARI_ACSI
-	help
-	  If you have a ACSI device that supports more than one LUN (Logical
-	  Unit Number), e.g. a CD jukebox, you should say Y here so that all
-	  will be found by the ACSI driver. An ACSI device with multiple LUNs
-	  acts logically like multiple ACSI devices. The vast majority of ACSI
-	  devices have only one LUN, and so most people can say N here and
-	  should in fact do so, because it is safer.
-
 config ATARI_SLM
 	tristate "Atari SLM laser printer support"
-	depends on ATARI && ATARI_ACSI!=n
+	depends on ATARI
 	help
 	  If you have an Atari SLM laser printer, say Y to include support for
 	  it in the kernel. Otherwise, say N. This driver is also available as
@@ -453,6 +425,4 @@ config ATA_OVER_ETH
 
 source "drivers/s390/block/Kconfig"
 
-endmenu
-
-endif
+endif # BLK_DEV

drivers/block/Makefile

@@ -9,7 +9,6 @@ obj-$(CONFIG_MAC_FLOPPY)	+= swim3.o
 obj-$(CONFIG_BLK_DEV_FD)	+= floppy.o
 obj-$(CONFIG_AMIGA_FLOPPY)	+= amiflop.o
 obj-$(CONFIG_ATARI_FLOPPY)	+= ataflop.o
-obj-$(CONFIG_ATARI_ACSI)	+= acsi.o
 obj-$(CONFIG_ATARI_SLM)		+= acsi_slm.o
 obj-$(CONFIG_AMIGA_Z2RAM)	+= z2ram.o
 obj-$(CONFIG_BLK_DEV_RAM)	+= rd.o