---

yaml
---
r: 360849
b: refs/heads/master
c: cd66acb
h: refs/heads/master
i:
  360847: d2a169a
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 3e78080f81481aa8340374d5a37ae033c1cf4272
+refs/heads/master: cd66acb412d3466bb95d3d7621afbea98647a028

trunk/Documentation/device-mapper/dm-raid.txt

@@ -30,6 +30,7 @@ The target is named "raid" and it accepts the following parameters:
   raid10        Various RAID10 inspired algorithms chosen by additional params
 		- RAID10: Striped Mirrors (aka 'Striping on top of mirrors')
 		- RAID1E: Integrated Adjacent Stripe Mirroring
+		- RAID1E: Integrated Offset Stripe Mirroring
 		-  and other similar RAID10 variants
 
   Reference: Chapter 4 of
@@ -64,15 +65,15 @@ The target is named "raid" and it accepts the following parameters:
 		synchronisation state for each region.
 
         [raid10_copies   <# copies>]
-        [raid10_format   near]
+        [raid10_format   <near|far|offset>]
 		These two options are used to alter the default layout of
 		a RAID10 configuration.  The number of copies is can be
-		specified, but the default is 2.  There are other variations
-		to how the copies are laid down - the default and only current
-		option is "near".  Near copies are what most people think of
-		with respect to mirroring.  If these options are left
-		unspecified, or 'raid10_copies 2' and/or 'raid10_format near'
-		are given, then the layouts for 2, 3 and 4 devices are:
+		specified, but the default is 2.  There are also three
+		variations to how the copies are laid down - the default
+		is "near".  Near copies are what most people think of with
+		respect to mirroring.  If these options are left unspecified,
+		or 'raid10_copies 2' and/or 'raid10_format near' are given,
+		then the layouts for 2, 3 and 4 devices	are:
 		2 drives         3 drives          4 drives
 		--------         ----------        --------------
 		A1  A1           A1  A1  A2        A1  A1  A2  A2
@@ -85,6 +86,33 @@ The target is named "raid" and it accepts the following parameters:
 		3-device layout is what might be called a 'RAID1E - Integrated
 		Adjacent Stripe Mirroring'.
 
+		If 'raid10_copies 2' and 'raid10_format far', then the layouts
+		for 2, 3 and 4 devices are:
+		2 drives             3 drives             4 drives
+		--------             --------------       --------------------
+		A1  A2               A1   A2   A3         A1   A2   A3   A4
+		A3  A4               A4   A5   A6         A5   A6   A7   A8
+		A5  A6               A7   A8   A9         A9   A10  A11  A12
+		..  ..               ..   ..   ..         ..   ..   ..   ..
+		A2  A1               A3   A1   A2         A2   A1   A4   A3
+		A4  A3               A6   A4   A5         A6   A5   A8   A7
+		A6  A5               A9   A7   A8         A10  A9   A12  A11
+		..  ..               ..   ..   ..         ..   ..   ..   ..
+
+		If 'raid10_copies 2' and 'raid10_format offset', then the
+		layouts for 2, 3 and 4 devices are:
+		2 drives       3 drives           4 drives
+		--------       ------------       -----------------
+		A1  A2         A1  A2  A3         A1  A2  A3  A4
+		A2  A1         A3  A1  A2         A2  A1  A4  A3
+		A3  A4         A4  A5  A6         A5  A6  A7  A8
+		A4  A3         A6  A4  A5         A6  A5  A8  A7
+		A5  A6         A7  A8  A9         A9  A10 A11 A12
+		A6  A5         A9  A7  A8         A10 A9  A12 A11
+		..  ..         ..  ..  ..         ..  ..  ..  ..
+		Here we see layouts closely akin to 'RAID1E - Integrated
+		Offset Stripe Mirroring'.
+
 <#raid_devs>: The number of devices composing the array.
 	Each device consists of two entries.  The first is the device
 	containing the metadata (if any); the second is the one containing the
@@ -142,3 +170,5 @@ Version History
 1.3.0	Added support for RAID 10
 1.3.1	Allow device replacement/rebuild for RAID 10
 1.3.2   Fix/improve redundancy checking for RAID10
+1.4.0	Non-functional change.  Removes arg from mapping function.
+1.4.1   Add RAID10 "far" and "offset" algorithm support.

trunk/MAINTAINERS

@@ -114,12 +114,6 @@ Maintainers List (try to look for most precise areas first)
 
 		-----------------------------------
 
-3C505 NETWORK DRIVER
-M:	Philip Blundell <philb@gnu.org>
-L:	netdev@vger.kernel.org
-S:	Maintained
-F:	drivers/net/ethernet/i825xx/3c505*
-
 3C59X NETWORK DRIVER
 M:	Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
 L:	netdev@vger.kernel.org
@@ -2361,12 +2355,6 @@ W:	http://www.arm.linux.org.uk/
 S:	Maintained
 F:	drivers/video/cyber2000fb.*
 
-CYCLADES 2X SYNC CARD DRIVER
-M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
-W:	http://oops.ghostprotocols.net:81/blog
-S:	Maintained
-F:	drivers/net/wan/cycx*
-
 CYCLADES ASYNC MUX DRIVER
 W:	http://www.cyclades.com/
 S:	Orphan
@@ -3067,12 +3055,6 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
 F:	drivers/video/s1d13xxxfb.c
 F:	include/video/s1d13xxxfb.h
 
-ETHEREXPRESS-16 NETWORK DRIVER
-M:	Philip Blundell <philb@gnu.org>
-L:	netdev@vger.kernel.org
-S:	Maintained
-F:	drivers/net/ethernet/i825xx/eexpress.*
-
 ETHERNET BRIDGE
 M:	Stephen Hemminger <stephen@networkplumber.org>
 L:	bridge@lists.linux-foundation.org

trunk/arch/powerpc/crypto/sha1-powerpc-asm.S

@@ -113,7 +113,7 @@
 	STEPUP4((t)+16, fn)
 
 _GLOBAL(powerpc_sha_transform)
-	PPC_STLU r1,-STACKFRAMESIZE(r1)
+	PPC_STLU r1,-INT_FRAME_SIZE(r1)
 	SAVE_8GPRS(14, r1)
 	SAVE_10GPRS(22, r1)
 
@@ -175,5 +175,5 @@ _GLOBAL(powerpc_sha_transform)
 
 	REST_8GPRS(14, r1)
 	REST_10GPRS(22, r1)
-	addi	r1,r1,STACKFRAMESIZE
+	addi	r1,r1,INT_FRAME_SIZE
 	blr

trunk/arch/powerpc/include/asm/bitops.h

@@ -52,8 +52,6 @@
 #define smp_mb__before_clear_bit()	smp_mb()
 #define smp_mb__after_clear_bit()	smp_mb()
 
-#define BITOP_LE_SWIZZLE	((BITS_PER_LONG-1) & ~0x7)
-
 /* Macro for generating the ***_bits() functions */
 #define DEFINE_BITOP(fn, op, prefix, postfix)	\
 static __inline__ void fn(unsigned long mask,	\

trunk/arch/powerpc/include/asm/reg.h

@@ -266,7 +266,8 @@
 #define SPRN_HSRR0	0x13A	/* Hypervisor Save/Restore 0 */
 #define SPRN_HSRR1	0x13B	/* Hypervisor Save/Restore 1 */
 #define SPRN_FSCR	0x099	/* Facility Status & Control Register */
-#define FSCR_TAR	(1<<8)	/* Enable Target Adress Register */
+#define   FSCR_TAR	(1 << (63-55)) /* Enable Target Address Register */
+#define   FSCR_DSCR	(1 << (63-61)) /* Enable Data Stream Control Register */
 #define SPRN_TAR	0x32f	/* Target Address Register */
 #define SPRN_LPCR	0x13E	/* LPAR Control Register */
 #define   LPCR_VPM0	(1ul << (63-0))

trunk/arch/powerpc/include/asm/systbl.h

@@ -358,3 +358,4 @@ SYSCALL_SPU(setns)
 COMPAT_SYS(process_vm_readv)
 COMPAT_SYS(process_vm_writev)
 SYSCALL(finit_module)
+SYSCALL(ni_syscall) /* sys_kcmp */

trunk/arch/powerpc/include/asm/unistd.h

@@ -12,7 +12,7 @@
 #include <uapi/asm/unistd.h>
 
 
-#define __NR_syscalls		354
+#define __NR_syscalls		355
 
 #define __NR__exit __NR_exit
 #define NR_syscalls	__NR_syscalls

trunk/arch/powerpc/include/uapi/asm/unistd.h

@@ -376,6 +376,7 @@
 #define __NR_process_vm_readv	351
 #define __NR_process_vm_writev	352
 #define __NR_finit_module	353
+#define __NR_kcmp		354
 
 
 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */

trunk/arch/powerpc/kernel/cpu_setup_power.S

@@ -48,6 +48,7 @@ _GLOBAL(__restore_cpu_power7)
 
 _GLOBAL(__setup_cpu_power8)
 	mflr	r11
+	bl	__init_FSCR
 	bl	__init_hvmode_206
 	mtlr	r11
 	beqlr
@@ -56,13 +57,13 @@ _GLOBAL(__setup_cpu_power8)
 	mfspr	r3,SPRN_LPCR
 	oris	r3, r3, LPCR_AIL_3@h
 	bl	__init_LPCR
-	bl	__init_FSCR
 	bl	__init_TLB
 	mtlr	r11
 	blr
 
 _GLOBAL(__restore_cpu_power8)
 	mflr	r11
+	bl	__init_FSCR
 	mfmsr	r3
 	rldicl.	r0,r3,4,63
 	beqlr
@@ -115,7 +116,7 @@ __init_LPCR:
 
 __init_FSCR:
 	mfspr	r3,SPRN_FSCR
-	ori	r3,r3,FSCR_TAR
+	ori	r3,r3,FSCR_TAR|FSCR_DSCR
 	mtspr	SPRN_FSCR,r3
 	blr
 

trunk/arch/powerpc/kernel/exceptions-64s.S

@@ -74,13 +74,13 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)				\
 	mflr	r10 ;						\
 	ld	r12,PACAKBASE(r13) ; 				\
 	LOAD_HANDLER(r12, system_call_entry_direct) ;		\
-	mtlr	r12 ;						\
+	mtctr	r12 ;						\
 	mfspr	r12,SPRN_SRR1 ;					\
 	/* Re-use of r13... No spare regs to do this */	\
 	li	r13,MSR_RI ;					\
 	mtmsrd 	r13,1 ;						\
 	GET_PACA(r13) ;	/* get r13 back */			\
-	blr ;
+	bctr ;
 #else
 	/* We can branch directly */
 #define SYSCALL_PSERIES_2_DIRECT				\

trunk/arch/powerpc/platforms/pseries/hvcserver.c

@@ -23,6 +23,7 @@
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/string.h>
 
 #include <asm/hvcall.h>
 #include <asm/hvcserver.h>
@@ -188,9 +189,9 @@ int hvcs_get_partner_info(uint32_t unit_address, struct list_head *head,
 			= (unsigned int)last_p_partition_ID;
 
 		/* copy the Null-term char too */
-		strncpy(&next_partner_info->location_code[0],
+		strlcpy(&next_partner_info->location_code[0],
 			(char *)&pi_buff[2],
-			strlen((char *)&pi_buff[2]) + 1);
+			sizeof(next_partner_info->location_code));
 
 		list_add_tail(&(next_partner_info->node), head);
 		next_partner_info = NULL;

trunk/drivers/bcma/driver_pci_host.c

@@ -404,6 +404,8 @@ void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
 		return;
 	}
 
+	spin_lock_init(&pc_host->cfgspace_lock);
+
 	pc->host_controller = pc_host;
 	pc_host->pci_controller.io_resource = &pc_host->io_resource;
 	pc_host->pci_controller.mem_resource = &pc_host->mem_resource;

trunk/drivers/char/hw_random/core.c

@@ -40,6 +40,7 @@
 #include <linux/init.h>
 #include <linux/miscdevice.h>
 #include <linux/delay.h>
+#include <linux/slab.h>
 #include <asm/uaccess.h>
 
 
@@ -52,8 +53,12 @@ static struct hwrng *current_rng;
 static LIST_HEAD(rng_list);
 static DEFINE_MUTEX(rng_mutex);
 static int data_avail;
-static u8 rng_buffer[SMP_CACHE_BYTES < 32 ? 32 : SMP_CACHE_BYTES]
-	__cacheline_aligned;
+static u8 *rng_buffer;
+
+static size_t rng_buffer_size(void)
+{
+	return SMP_CACHE_BYTES < 32 ? 32 : SMP_CACHE_BYTES;
+}
 
 static inline int hwrng_init(struct hwrng *rng)
 {
@@ -116,7 +121,7 @@ static ssize_t rng_dev_read(struct file *filp, char __user *buf,
 
 		if (!data_avail) {
 			bytes_read = rng_get_data(current_rng, rng_buffer,
-				sizeof(rng_buffer),
+				rng_buffer_size(),
 				!(filp->f_flags & O_NONBLOCK));
 			if (bytes_read < 0) {
 				err = bytes_read;
@@ -307,6 +312,14 @@ int hwrng_register(struct hwrng *rng)
 
 	mutex_lock(&rng_mutex);
 
+	/* kmalloc makes this safe for virt_to_page() in virtio_rng.c */
+	err = -ENOMEM;
+	if (!rng_buffer) {
+		rng_buffer = kmalloc(rng_buffer_size(), GFP_KERNEL);
+		if (!rng_buffer)
+			goto out_unlock;
+	}
+
 	/* Must not register two RNGs with the same name. */
 	err = -EEXIST;
 	list_for_each_entry(tmp, &rng_list, list) {

trunk/drivers/connector/cn_proc.c

@@ -313,6 +313,12 @@ static void cn_proc_mcast_ctl(struct cn_msg *msg,
 	    (task_active_pid_ns(current) != &init_pid_ns))
 		return;
 
+	/* Can only change if privileged. */
+	if (!capable(CAP_NET_ADMIN)) {
+		err = EPERM;
+		goto out;
+	}
+
 	mc_op = (enum proc_cn_mcast_op *)msg->data;
 	switch (*mc_op) {
 	case PROC_CN_MCAST_LISTEN:
@@ -325,6 +331,8 @@ static void cn_proc_mcast_ctl(struct cn_msg *msg,
 		err = EINVAL;
 		break;
 	}
+
+out:
 	cn_proc_ack(err, msg->seq, msg->ack);
 }
 

trunk/drivers/gpio/gpio-ich.c

@@ -128,9 +128,9 @@ static int ichx_read_bit(int reg, unsigned nr)
 	return data & (1 << bit) ? 1 : 0;
 }
 
-static int ichx_gpio_check_available(struct gpio_chip *gpio, unsigned nr)
+static bool ichx_gpio_check_available(struct gpio_chip *gpio, unsigned nr)
 {
-	return (ichx_priv.use_gpio & (1 << (nr / 32))) ? 0 : -ENXIO;
+	return ichx_priv.use_gpio & (1 << (nr / 32));
 }
 
 static int ichx_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)